Urgent inquiries about wardrobe boards, post paint, pencil prints

Ha ha. The question is too simple. Use a small amount of thinner to dilute the paint where the pencil marks are located.

Later. Erase the pencil mark with an eraser. If you can't wipe it off, it's not diluted.

It is easy to wipe off when diluted clean. After wiping it off. On the last paint.

That's it. Primer. It's all to be sandpapered.

Give it points. Even a decoration master.

Basically, no. Painters are irresponsible. Dirt (dust, pen marks, etc.) should be removed with sandpaper, and the dust should be dusted off before painting.

If you're not done with the paint yet, consider applying it again with a melange paint.

If you want to get rid of it completely and perfectly, let the painter remove the good paint. In the coming once. Of course, it takes time, effort, money and effort. Renovation is just that.

You are so worried that the pencil and dust printing paint should be light-colored, and there is no simple way to deal with those marks on light-colored paint furniture, only to scrape or grind off the traces with a blade and paint, just a small area with imprints, and then brush twice with paint after polishing and smoothing, if there is a little color, the paint is also less colored, and there is no problem with the coating film and the outer layer. You are probably using nitro paint, and the nitro primer can dry thoroughly when applied thickly and will not affect the construction.

If it is a painting process, it is basically impossible to see it later, if it is varnish, you need to ask the master to take a towel to stick to the dirty place in the sky, and then wipe the dirty place clean with rubber, and finally re-oil the whole surface through the paint can be solved. Hope.

As soon as possible, sand dip the thinner to polish off the pencil marks and dust marks, do not over-polish until the marks are worn off.

Coiled the wire in the position of the pencil against the tip of the pencil, coiled into a coil shape, (Purpose 1.)Lower the center of gravity of the system. 2。Disperse the mass outward) Make the pencil case wire into a spinning top, and then turn it to achieve it, hehe.

That's an interesting question!

I don't know what you mean by what the wire is for.

Rub it with iron yarn, rub it with wine paint, or make a picture on it.

Hehe, I've done renovation before, to be honest, there is no way to wipe this situation, I encountered a similar situation... I felt that if I couldn't go, I would cover it up with similar paint.

Putty toning repair, paint toning can be repaired.

If the wardrobe is white, it is more convenient, directly putty repair, and then patch up the white enamel.

First of all, ask what kind of paint they have, if it is alkyd, you can use No. 200 or gasoline, according to different types of paint, you can use toluene, xylene, butanol, ethyl ester, etc.

Please indicate the material of the veneer, if it is also painted, you can only shovel it and repair the paint from scratch.

It's late now, if it were 12 hours at that time, you can wipe it with a thinner.

Wipe with a towel moistened with paint thinner. But to affect the veneer face dots. Find workers to trouble deducting money.

I'm also a worker, but I'm very disgusted with these people who eat too much.

Wardrobe paint removal methods are:

1. If it is stained with solvent-based paint, it should be immediately scrubbed with a cloth or cotton ball dipped in gasoline or kerosene, and then washed with detergent.

2. If it is stained with water-soluble paint (such as water-soluble paint, latex paint) and household interior wall paint, wash it off with water in time.

How to remove wardrobe paint can consider the following methods:

1. Open the window, keep the room ventilated, open the cabinet door, take the floor fan and power it to blow on the cabinet door for one hour.

2. Wipe the inside and outside of the cabinet once or twice with a slightly damp towel and blow dry.

3. Use leaf wide mud and activated carbon to further adsorb and remove paint odor.

It depends on the large area removed, and the large area is not easy to get, so you have to go to the factory for processing. If it is a small area, you can gently sand it off with fine sandpaper. It is best to use fine sandpaper above 800 mesh, and if it is too coarse, it will grind out obvious marks.

There is a paint stripper sold in the building materials market, go buy a bottle, I have used it at home, it is very easy to use, even the veneer does not hurt, and it is estimated that there is no problem with the steel plate.

The cheapest is the pine water or the day of the water, generally hardware stores have it, take a cloth wet and wipe it clean, bring gloves and wipe it clean.

Paint strippers can be used for removal.

Paint strippersIt is a liquid made of aromatic compounds and high solubility solvents, which has a strong ability to dissolve paint films, fast paint stripping speed, high efficiency, and a wide range of coatings that can be removed, suitable for various paints such as alkyd, nitro, polyurea, polyurea, polyurea, rubber ethylene, epoxy, polyester, polyurethane, etc. After the paint has been removed, the cabinet needs to be cleaned of odors.

How to remove the smell of the cabinet:

1.Can pineapple, pineapple, cut into slices and put on a plate in an iron cabinet 2Use common scavengers on the market.

3.White vinegar fumigation.

You can go to the decoration material market and buy a bottle of thinner or paint, if it doesn't work, I recommend you buy a shovel...

Ways to remove paint from steel plate cabinets:

Wash with a special paint remover.

Wash with banana water.

The latter is sanded off by hand machine.

Paint stripper is made of aromatic compounds, high solubility solvent combined into a liquid, has a strong ability to dissolve paint film, paint stripper speed, high efficiency, can remove a wide range of coating types, suitable for alkyd, nitro, polyurea, polyurea, rubber ethylene, epoxy, polyester, polyurethane and other paints, exterior wall coatings, powder coating, coating removal, paint removal ability is very strong Compared with similar foreign products, the paint removal effect is the same, and the paint removal time can be saved by about 20%.

Banana water, also known as Tianna water, is a colorless, transparent and volatile liquid, with a strong banana smell, slightly soluble in water, soluble in various organic solvents, flammable, mainly used as a solvent and thinner for painting. Banana water is also used as a solvent in the production of many chemical products, coatings, and adhesives.

Wash with paint stripping, very quickly.

Make the bottom with white lacquer and top with red lacquer.

First brush the primer for sealing, then batch putty, and then brush the paint. The paint is not clear, and the mildew on the board is not visible.

Veneer. Fireproof board. Aluminum-plastic panels.

The white color cracks in a few months, and it looks good at the time.

Strong paint stripper

Product name: Paint stripping and degumming agent.

Product model: YH-369

Product specification: 500ml

Details: Performance and Characteristics:

YH-369 is formulated with a variety of environmentally friendly organic solvents and high-efficiency penetrants, which can penetrate into the paint layer in a short time, and completely peel off the paint and glue residues attached to the surface of the body.

YH-369 is a neutral formulation, which is safe and reliable for all kinds of metal surfaces, wood, and glass.

YH-369 is a self-spraying paint stripper, which is easy to carry and easy to operate, and is suitable for a variety of paint surfaces such as alkyd blending paint, acrylic primer, acrylic topcoat, phosphating primer, nitro paint coating, etc.

If you want to take off baking paint, building formwork paint, electrophoretic paint, enameled wire insulation paint and other special paints, we also have more professional products for you to choose:

Product model. Product name.

Scope of application. yh-370

Paint-type paint remover.

Large-area plates, refurbishment of old equipment.

yh-371

Immersion paint remover.

Metal parts, hangers, enameled wire.

How to use: Shake the liquid gently, stand the bottle upright, make the nozzle 15-20cm away from the target, press the nozzle switch, spray the paint stripper evenly on the surface of the body, wait for 5-10 minutes, you can see the patent leather warped, rinse it with a rag or water.

Sprayed white paint on walls and wood boards can be wiped clean with a dry towel, and if it can't be wiped off, use very fine sandpaper (or used fine sandpaper) and then wipe it with a dry towel. Pay attention to the sanding must be light and do not grind through the paint.

You can use some paint stripping agent, dip it with a brush, apply it to it, and after about an hour, when the coating film softens and the original paint begins to peel off, use bamboo chips to scrape off the original paint.

At present, most domestic brands of latex paint are water-soluble, so they can be removed by wiping with water. The paint on the tile, please do not scrape with a blade, it will damage the glaze, you can use thinner (xylene) to add water, wipe it with a cotton cloth.

Try it with a small amount of gasoline, be sure to wipe it in a cool and dry place, because gasoline is flammable, so try it with a small amount first.

Wipe with gasoline and blot off with toilet paper.