What is the reason why the switch in the toilet at home trips as soon as it is turned on

The socket is damp and causes a short circuit to trip.

It is more likely, you can remove the socket after pulling the brake and check and pay attention to tighten the inherently loose connector screws, and pay attention to maintaining the distance between the wires in the box when reinstalling it back.

Analysis of the reasons for the tripping of the toilet switch:

1. If the socket in the bathroom is mainly used to connect the water heater, and now it is found that it often trips from time to time, test whether the water heater itself is faulty, if you suspect that other electrical appliances are faulty, you can disconnect this electrical appliance and connect it to other places, if the fault disappears, you can conclude that the trip is the fault of this electrical appliance.

2. If there is no problem with all the electrical appliances in the bathroom after inspection, it can be determined that the power supply line has been short-circuited.

3. It must be inspected in sections from the gate box. But the condition is when the failure occurs. If the fault comes and goes, it is difficult to check.

4. It is recommended to disconnect the toilet from the gate box and use the temporary power supply line to supply power. After using it for a period of time, if the fault disappears, it means that there is a problem with the power supply line of the bathroom. You can ask a professional electrician to replace the dark wires in the bathroom.

5. If the dark wire cannot be replaced, you need to ask a professional electrician to arrange the open wire indoors.

A short circuit will cause a power failure trip;

The current exceeding the total load of the switch at the moment of start-up will cause tripping;

You can stop using other electrical appliances at home and turn on the vacuum cleaner for testing. If it still trips, it is a problem with the machine, and if it does not trip, it means that the output power at home is too high.

Summary. Hello I'm glad to answer for you, the bathroom always trips may be a problem with the toilet socket line, three situations, one is not enough load; Second, the zero line of the toilet socket line is shared with the lighting, which will cause current imbalance and trip; The third is that the toilet socket line is used together with other lines. Get a professional electrician to check it out.

What to do if the bathroom keeps tripping.

Hello I'm glad to answer for you, the bathroom always trips may be a problem with the toilet socket line, three situations, one is not enough load; Second, the zero line of the toilet socket line is shared with the lighting, which will cause current imbalance and trip; The third is that the toilet socket line is used together with other lines. Get a professional electrician to check it out.

Hello, the second situation is that the bathroom trips as soon as it takes a bath because a large amount of water vapor on the switch and socket during the bath, forming a conduction, and the insulation value of the cable or switch decreases, and after the air is dry, the brake can be used normally, which indicates that there is a short circuit in the wire, and the wire should be replaced in timeThere are two kinds of tripping, one is the excessive power of the electrical appliance, and the other is the phenomenon of leakage. You see what your situation is.

It is recommended to find a professional electrician who repairs it, and it is not recommended to repair it yourself

If the socket in the bathroom is used to connect to the water heater, it is now found that it will trip from time to time.

Looking for a professional electrician, professional things, looking for professional people, your problem is a short circuit in the line, which is quite serious, and my analysis will not be as simple as changing a light bulb.

What to do if the bathroom always trips: 1. Poor installation: due to the poor installation of the electric switch, in the case of poor installation of the electric switch, the lead of each pile head will be loosened, and with the passage of time, the fuse will soon be oxidized and burned out, resulting in undervoltage of the line, which will lead to the tripping of the electric switch.

2. Excessive power consumption: If the actual power consumption of household appliances is too large, it will also cause the electric switch to trip, because the rated current of the line is fixed, and if it is exceeded, the load will be automatically cut off. In this case, we need to install a switch with the right amount of electricity used in the home so that it doesn't trip.

3. Leakage and short circuit: If the line in the home leaks, or the electrical appliances leak, it will also cause the line voltage to suddenly become larger, so that there will be tripping. However, this situation is not easy to detect, so it is best to ask a professional electrician to check the electrical and electrical conditions of the home.

You can push it up directlyBecause of the use of high-power electrical appliances, or the line is short-circuited, if it is a line, the short circuit pushes up, and it will trip, if there is no jump, it proves that the blind line is good, you can continue to use.

1. Turn off all switches and pull out all electrical plugs, including the basement and other places that you don't pay attention to.

2. Close the main circuit of the main switch is intact, if it is no longer tripped, it means that the main circuit is intact. If it trips, it proves that the problem is in the main circuit, and it is necessary to disassemble the line in one step to find it in different areas, and it is recommended to find a professional electrician.

When it rains with thunder:

It is better not to use electrical appliances, because during thunderstorming, the voltage outside is very high, sometimes even reaching hundreds of thousands of volts, while the indoor voltage is 220 volts. The high voltage outside will produce a strong electric grinding current, and the strong current will blow the fuse and damage the electrical appliances after entering the room, and may cause disasters in serious cases.

If you open it all and jump it, the current of the switch may not be enough to overload and cut off the power. If you open each one separately and do not jump, it means that there is no leakage.

Dear, hello, I am happy to answer for you how the main switch at home always trips Answer: tripping, that is, the air switch is automatically disconnected, divided into 2 situations: 1Short circuit, due to the aging of the wire, or the human accident to connect the live wire and the wire directly together without passing the load.

Phenomenon: instantaneous tripping, that is, as long as there is a short circuit, the first time the air is automatically disconnected2Overload, due to the advent of summer, too many household appliances, and the load of the air switch and the wire diameter of the wire is too thin, resulting in the air opening due to overload and disconnection.

Phenomenon: Delay, tripping after 5 minutes of electricity. 【Reason】You can look at the high-power electrical:

Electric kettles, air conditioners, whether you have turned on a few air conditioners, induction cookers, garment steamers, vacuum cleaners, these are all high-power household appliances. If you open it together, the line will trip if it can't stand it. Solution1.

You can properly turn off a few household appliances that are not urgently needed2In the case of Lu Yun, replace the air opening with higher power, if the wire diameter is not enough, and you want to replace it, then the wire is thicker.