Does the nine cavity gas stove save gas? How to adjust the size of the fire

Not gas-free. When ignition, the switch should be turned on to the maximum, and then gently rotate the knob to the left according to the needs of the fire after ignition, and adjust the size of the flame.

The gas stove is a kind of stove, which is mainly located in the gap between the stove and the upper cover to supplement the lack of air during combustion, so as to promote combustion and reduce carbon monoxide.

and nitrogen oxide formation.

The air intake mode of the gas stove is divided into upper air intake, lower air intake, full air intake, etc., according to different classification standards.

It can be divided into several categories.

According to the gas source, the gas stove is mainly divided into liquefied gas stove, gas stove and natural gas stove. According to the eye of the stove, it is divided into single foci, double foci and multi-eye foci.

The gas stove is a method of providing natural air to the gap between the stove and the upper cover to supplement the lack of air during combustion, thereby promoting combustion and reducing the generation of carbon monoxide and nitrogen oxides. The stove body is annular and has a mixed gas jet on the inner periphery; One end of the mixing pipe is connected to one side of the stove, and the other end is provided with an air conditioning port, and the middle of the air conditioning port is a gas input pipe.

On the airbox in the middle of the stove body, a plurality of air jets that spray air upwards and blow out air by a blower are arranged; The blower that blows air through motor is connected with the first airbox by input tube; The upper cover is covered on the top of the stove, and in the middle is the flame-throwing area, through which the flame is ejected upward; At the top of the stove, at least three or more convex seats are arranged along the circumference; Place the upper cover on the protrusion; Natural air is then created through the gap between the upper cover and the strug.

Advantages of the nine-chamber gas stove:

Low carbon and environmental protection, smokeless, no iron filings, no smoke pot bottom, no rust; Fully burned,Carbon monoxideEmissions are far below the national standards. Save time, boiling water and cooking rice save more than 20% of the time compared with traditional stoves. The service life is relatively long, due to the simple and solid structure, high material, generous shape, and the service life can reach more than eight years.

Disadvantages: dangerous operation, forgetting to close is easy to have air leakage. It is difficult to clean after a long time.

How to choose a gas stove:

The choice of gas stove material and stove eye, there are mainly 2 materials on the market, one is glass, the other is stainless steel, and the general choice is stainless steel, which should be selected according to your specific situation.

The higher the heat flow value of the design of the household gas cooktop, the stronger the heating capacity, but in fact, the amount of heat should be adapted to the cooking method and the cooktop.

There are two main ways to choose the ignition method of gas stove on the market, one is electronic pulse ignition, and the other is piezoelectric ceramics.

There are two types of ignition, so choose according to your needs.

The stove should be beautiful and generous, press the countertop handle with your hands, no obvious warping, hold the two corners of the stove with your hands and twist it back and forth, and the stove should not be significantly deformed. Tinplate must not be used for the panel material.

The burner head and fire cover should be finely machined without obvious burrs.

The first thing to do is to find its knob, adjust it through this knob, if you want to make it a little smaller, then turn left, or vice versa. The operation is relatively simple, but if it is useless to adjust it, it means that the hole is blocked, and it needs to be cleaned up before the operation.

After a long period of use, a layer of oil stains will inevitably form on the surface of the gas stove, which will easily lead to the blockage of the gas stove and affect the later use. Therefore, every once in a while, it is necessary to clean the gas stove to ensure that the surface is clean and tidy, which can also ensure that the life of the gas stove is increased.

Pick a gas stove.

1. Understand the supporting facilities.

It is best to have a protective device, so that it will be more reassuring to use, there are many brands that have this setting, before buying, you can go to understand it first, and then make a decision.

2. See the way of fire.

It is generally divided into two kinds, one is direct fire, and the other is rotary fire, for most friends, it is more recommended to buy the latter, it is more suitable for domestic use, after all, our eating habits are different from foreign countries. If you don't need such a fast heating rate, you can choose the former.

3. Look at the material.

Its material is also more, the largest number of buyers are two, one is tempered glass, and the other is stainless steel, in comparison, the latter will definitely be more durable, so friends who often need to use it, you can take it as the first choice.

4. Look at the brand.

If it is a big brand product, there will be absolutely no problems with its quality, so when buying, there is no need to have any concerns, it is recommended that you choose this one, and it will definitely not be a problem to use it for 10 years or 20 years.

Twist the switch of the gas stove to adjust the heat of the gas stove. The following describes the specific operation method for reference:

1. First turn on the gas on the gas stove, then find the lighter switch, press the switch, and then twist it counterclockwise.

2. After ignition, the fire is the largest, (under normal circumstances, there is a sign of the size of the fire on the gas stove, and you can twist it along the mark), and also use counterclockwise to twist the switch to the bottom.

3. When the switch is twisted to the bottom, the fire on the gas stove will automatically decrease.

4. Twist the switch to the bottom, so that the fire power will become the minimum, if you want to turn the switch back to its original position, so that you can adjust the size of the fire by twisting it back and forth.

Hello, I am glad to answer for you: 1. On the natural gas stove, there is a rotary knob, which can be rotated directly to adjust the size of the fire; 2. Turn the natural gas stove over, and there is a damper on the right, which can adjust the fire power of the outer fire ring; 3. Adjust the damper on the left side of the natural gas to adjust the fire power of the inner fire ring; 4. The main valve of rotating gas can also control the size of natural gas firepower. You can observe which of the above stoves you are using and adjust them according to the prompts.

There are air intakes at the bottom of the gas stove that can adjust the amount of air taken in the gas stove and you turn it slowly until the ideal flame.

The valve that adjusts the size of the gas is at the port of the gas tank, where the red gas pipe is butted, that is, the valve of the size of the gas.

There may not be a good way to make the fire bigger, and the one that can be adjusted will not work very well, so if you want to use a higher firepower, you have to replace the stove with a higher firepower.

Because the size of the fire is determined according to the size of the flame separator of the stove, the small flame separator is the nozzle of the gas hole, you want to make the fire bigger, you must make the nozzle out of the gas more, but the gas comes out too much, the fire separator is too small to be completely burned, so, want to adjust the way to make the fire bigger, it is difficult to do, little effect!

Adjustment method: 1, if the use of bottled gas, then replace the pressure reducing valve, or adjust the pressure reducing valve, the adjustment method is to open a cover on the pressure reducing valve, with a screwing knife counterclockwise adjustment.

2. Adjust the damper. Turn on the stove and be in a burning state, adjust the small iron sheet at the damper, and adjust it to the maximum flame and the flame is blue! (Compiled by Yao Haitao).

3. Find the manufacturer's after-sales service, expand the nozzle and increase the air intake under the withstand capacity of the fire divider. (This must be operated by the manufacturer, not by yourself). If the nozzle is yes, it can be adjusted to 0 8mm, which is also the most effective way without changing the stove!

(Compiled by Yao Haitao).

First of all, make sure that the stove gas source you are using is correct, the stove gas source is not right, and the flame will be high. A normal flame is 10 to 20 centimeters. You can turn the flame down with the switch you light it.

If you're using a liquefied gas tank and you're using a regulator, turn the regulator off.

The gas source is right, you can find the manufacturer to help you get it after sales, it should be that the gas nozzle is bigger for you, and the flame will be bigger. You can't make a small one yourself, just find an after-sales service to replace the air nozzle with a small eye.

2. Turn the natural gas stove over, and there is a damper on the right, which can adjust the fire power of the outer fire ring;

3. Adjust the damper on the left side of the natural gas to adjust the fire power of the inner fire ring;

4. The main valve of rotating gas can also control the size of natural gas firepower.

You can observe which of the above stoves you use and adjust them according to the prompts, I hope my answer can help you, I wish you a happy life, good health, and smooth work!

Life is everywhere, as long as you have a pair of eyes that are good at discovering, pay attention to Erya, and update the tips in life for you every day, so that you can become a little expert in life!