The bubble bar in the fish tank is buzzing, and the bubble bar in the fish tank is blocked

If the bubbles in the fish tank are buzzing, then there may be a problem with the aerator, and it is best to check if the aerator is not in contact with the water.

If the bubble bar in the fish tank is buzzing, there may be a problem with the oxygen pump, and it is recommended to replace the oxygen pump in time.

The bubble bar in the fish tank is buzzing, and I think this should be the sound of the engine, so we should look at the engine to see if it is malfunctioning, so that we can determine the cause of its buzzing.

Check the oxygen pump, the oxygen pump is frequent, well, unplug it appropriately, rest for a while, plug it back in, and see what the effect is.

The bubble bar in the fish tank is buzzing, it should be loose, re-glue or put it. The bubble bar is readjusted.

The bubble bar in the fish tank buzzes, which is the bubble that the fish spits out when swimming in the fish tank, and it will buzz.

The bubbles in the fish tank are buzzing, indicating that your motor has failed, and you should find a way to repair it.

Just the bubble bar is buzzing, maybe it's next to the power supply, right? Overcurrent and leakage.

The cells of the fish tank are buzzing, you can turn off the power and do not leave it on for a long time.

I think there must be some sound of electricity? Or maybe it's a sound or something.

It's possible that the bubble machine is a little broken, you can change the bubble machine or take it outside to clean it up for him.

Method:

Generally, the eye holes are blocked by nitrifying bacteria and algae breeding, and you can use 200 times dilution of 84 disinfectant, soak for half an hour to an hour, and then rinse it with water. (Be sure to flush it several times). The air bar can be restored.

Rinse the hole with clean water and rinse the liquid from the hole. Then put the fish tank for use.

You can also take the nano gas tray out of the fish tank and put it into the basin for washing, and pour an appropriate amount of water into it. Then put in a cleaning tablet, wait for it to melt, and then wash the algae and foreign matter on it. After the attachment on the surface of the nano gas disk is decomposed, put it in clean water and clean it until there is no smell of cleaning tablets on the gas disk stone, and then put it into the fish tank for use.

Bubble stone is mainly used in fish tanks and has the effect of increasing oxygen. Bubble stones are generally cylindrical in shape, with bubbles coming out from the sides. There are many types of bubble stone, such as white corundum bubble stone, silicon carbide bubble stone, mineral sparkling stone, resin bubble stone, plastic bubble stone, wooden bubble stone, etc.

The exhaust bar has no access to the ground.

The power of the aeration pump is small, and the exhaust bar is too large and mismatched. This situation often occurs, and sometimes after a period of normal use, there will also be a situation where the second half of the air bar does not bubble.

Basic Information. In particular, the introduction of smart water culture has become the main body of the current fashionable home. It is a good choice to arrange a fish tank that is compatible with the overall style of the room.

An aquarium, also known as an aquarium or aquarium, is a container for ornamental use and special breeding of aquatic animals and plants, and is an animal feeding area, usually with at least one side of transparent glass and high-strength plastic.

The aquarium is home to plants and animals (usually fish, but can also be invertebrates, amphibians, marine mammals or reptiles) that live in captivity. Aquarium farming is also one of the most popular hobbies around the world, with about 60 million enthusiasts worldwide.

In the bustling modern metropolis, fashionable upper-class people are also thinking about how to introduce landscape culture into modern home life.

The problem of the resonance of the fish tank is not too easy to encounter in novice fish farming. But for an old fish farmer like me, most of the old equipment at home is old, and this phenomenon will often be encountered, and it is often just here and there, and he is sick again, and he is very busy.

Regardless of whether the water flow in your fish tank is loud or not, as long as there is a resonance, we must first check the water pump and various equipment. Is every suction cup reliable? This is important.

First of all, it is necessary to check whether the suction cups of each equipment are aging or the suction power is not enough? Then let's go and see if there's something tangled in the rotor inside the pump?

If something is tangled in the pump, the first thing will be that the filtered water flow will be smaller than usual. At this time, we can disassemble the pump, we can disassemble it and look at the rotor! Generally, the G small water pump can be disassembled.

In addition, the resonance of the oxygen pump is also very easy to occur frequently, because the thing is originally vibrating greatly, and it must be stable when we visit, or it is better to hang it directly and not stick it to the fish tank.

If everything is okay and the vibration of the pump is still loud, it may be that the quality of the pump is not very good. We can put a piece of filter cotton in the gap between the pump and the suction cup, so that we can reduce a certain amount of dryness. If the situation is still not improved, then we have to change the water pump, and then we can't change the cylinder, if it doesn't work, change the house, we can't live it, okay?

Ha ha! The problem of high energy consumption, I personally think there is no way to solve it, who said that we like to raise fish, love it to be willing to invest in it. However, with the development of science and technology, all kinds of inverter heating rods, inverter water pumps, and inverter air pumps are on the market one after another, and I believe that the problem of energy saving in fish tanks will be well improved.

Then there is the problem of fish tank noise, first analyze the noise of the fish tank, first of all, the water pumpThe sound of the water outlet after the water from the bottom filter tank is pumped into the master cylinderand then it isThe sound of falling water in the overflow area, and then the water from the main tank passes through the overflow areaThe sound of flowing into the outlet of the bottom filter cylinderThe noise generated by the operation of various equipment and equipment (aeration pumps, submersible pumps, pipe fittings, etc.) in the fish tank

I think you can put the water out and then put new water into the tank so that the pump doesn't make a lot of noise.

A glass lid can be attached. This prevents sound from coming out. But stay too long, otherwise there will be a lack of oxygen.

This is the solution formed by bringing a large amount of air into the water at the same time in the upper filter box, reducing the position of the upper filter box, making it more connected to the water surface, raising the water level in the tank, reducing the water drop, extending the sewer pipe below the water surface, reducing the flow of the water pump, and transforming the water outlet to disperse the water.

The water outlet of the sewer pipe hits the water surface of the bottom tank, lengthens the sewer pipe, makes the water outlet on the water surface of the bottom tank, the air of the overflow tank is sucked into the sewer pipe, and the sewer pipe is equipped with a valve, and the liquid level in the overflow tank has a certain height by adjusting the flow rate, and the air will be sucked into the sewer pipe, and there will be no noise.

When the overflow pipe is discharged, there will be more or less noise due to the mixing of steam and water, and it is impossible to achieve silent draining, so you can add 5cc of water through the cover grid above the sewer column to eliminate the noise.

The water surface in the overflow tank is specially caused by the falling water in the main tank and the water surface in the overflow tank is raised. Or add a piece of filter cotton to a certain height in the overflow tank to buffer the falling water, and try the silencing glass.

Everyone knows that bubble stones are noisy, how to get rid of them? Let me tell you about it.

Method 1: You can reduce the resonance, hang the air pump or pad the air pump with multiple layers of cotton pads to reduce vibration.

Method 2: You can isolate the air pump, first make the air pump isolation box, and add sound insulation measures inside the box, such as sound insulation cotton.

Or directly connect the air pump to the outside to reduce indoor noise.

Method 3: You can also change the sand head (bubble stone), change the high-temperature sintered bubble stone, buy high-quality bubble stone with small pores to refine the bubbles, and the noise of the fish tank will be much smaller.

Formation of bubble stones: in volcanic eruptions.

time, magma.

A large amount of volcanic gas separated from the bubble forms a bubble, and then the foam cools, and the gas is "frozen" in the pumice, and the bubbles in the pumice rock account for more than 70% of the total volume of the rock, and the bubbles only have very thin volcanic glass and minerals, so they can float on the water surface, so they are called pumice. It is used as a filter desiccant in the chemical industry.

Catalysts: Fillers, as well as carriers of agricultural pesticides and control agents for fertilizers. It can be used as a mixture of cement or formulated clinker-free cement, and can also be directly used as a building material.

Bubble stone species: white corundum, bubble stone, silicon carbide.

bubble stone, mineral sparkling stone, resin bubble stone, plastic bubble stone, wooden bubble stone, etc., different materials of bubble stone, the production process is also different. For example, resin bubble stone is pasted by adhesive means, and its life is shorter than that of firing. Mineral sand bubble stone is used at 200 degrees Celsius.

It is fired and slightly inferior to white corundum and silicon carbide. Plastic bubble stone, so the name is made of light and simple, can be bent into any shape, so that the bubbles produced in the water show a different style, wooden bubble stone, easy to absorb the water in the water, wood products short-term soaking in water can prevent rot, but long-term soaking in water, because the wood absorbs the water in the water, so that the wood expands and becomes larger, and slowly the bottom begins to rot, and then sinks little by little, and its service life is not as good as white corundum, silicon carbide bubble stone.

First of all, the sound is the bursting of bubbles from the oxygen pump or the air stone. If it is the sound of bubbles produced by the air stone, then it is the sound of the bubbles bursting on the surface of the water, and there are two ways to solve this problem.

Choose the air stone that produces fine bubbles, the smaller the bubble, the smaller the burst sound, and the same size of the air stone produces more and smaller bubbles, the more oxygen and water area contact, the greater the amount of dissolved oxygen in the water, so why some imported air stones ** are so high is also the main difference here.

The other is that the position of the bubble burst is in a relatively sealed container, so that the bubble popping sound will be blocked to the maximum extent, and there are similar things.

It's not that the bubble stone is too loud, it's because the oxygen pump is ringing.

Wrap the bubble stone in the white gloves that you play with. Small stones with the thumb part are enough.

It could be that the water is flowing too fast or that there is a problem with the water level control system. 1.The water is flowing too fast :

Adjust the flow rate of the water flow, change the pressure of the water pump to find the best water flow speed for the fish tank. 2.There is a problem with the water level control system:

Check the water level control system, check the water level sensor and silencer to make sure the water level control system is working properly. 3.Ensure water quality:

Check the water quality to check for algae and viruses to ensure that the water quality is stable to avoid harm to the fish. 4.Check the water pump:

Check whether the pump is ventilated and check whether the pump is damaged to ensure that the pump can run smoothly. 5.Check the filters:

Clean or replace the filter and check the internal filter material to ensure that the filter is effective in filtering the water. 6.Replacement of pipes:

If the pipe barrier is blocked, it can cause the water to flow too fast or be too noisy, so the pipe should be replaced in time.

This is a solution formed by bringing a large amount of air into the upper filter box and launching at the same time, which can be carried out through the following points:

1. Lower the position of the upper filter box to make it more connected to the water surface.

2. Raise the water level in the tank to reduce the water drop.

3. Extend the sewer pipe below the water surface.

4. Reduce the flow rate of the water pump.

5. Transform the water outlet to disperse the water.

Raise the water level to shorten the distance between the outlet and the water surface, or add a brush between the outlet and the water surface.

I have the same problem as you, and after repeated attempts, I have found 2 ways.

The first is to take a clean shoelace, fold it in half 3 times, then insert a toothpick and hang it in the water outlet. This gurgling sound will be much quieter, almost gone.

Another way is to use a hose, which is the water pipe of your pump, like this, insert it into the outlet pipe, (bend at the bottom), and then fix it on the wall of the fish tank. Because this hose is slightly thinner than the spout, it needs to be fixed. Like using your suckers.

The sound is almost inaudible, only the sound of the water flowing can be heard. Air bubbles will come out of the hose without sound.

If there is a tube to increase oxygen, then the sound of clamping its hose at night will be much quieter, my upper filter box is because of that thing, and then open it during the day, I can't see the hose in your **, yours doesn't? If not, I can only provide one possible scenario. The gmssgmp in the floor is very good, and it would be nice if it was attached to the operation method.

Happy fish farming

Resonant sounds are generally caused by electrical appliances, especially circulation pumps and oxygen pumps.

All contact points should be checked, and the resonance is caused by a motor device, which is generally a filtered water pump and an oxygen pump.

1) Check the contact point between the pump and the fish tank, if there is a suction cup at the installation site, ensure that each suction cup is in good contact with the cylinder wall, and check the contact point for other installation methods to prevent noise caused by vibration, and add soft pads to isolate the problem.

2) The contact between the outlet pipe of the water pump and the other parts of the fish tank, gently press the contact place with your hand, if the noise is reduced, it is obvious that the place has been found.

3) The contact point between the water inlet of the water pump and the fish tank.

4) Take a look at the air pump, generally there are soft feet at the bottom of the air pump, but the side can not be in contact with any hard objects. After a long time, the trachea becomes stiff, and it should also be placed in place;

5) Try not to put anything on the cylinder head. The contact between the cylinder head and the fish tank body should also be checked, and the cylinder head can be checked by pressing the cylinder head.

6) The pump must be completely submerged in water, not too close to the water surface, and the water pipe can be changed if necessary to bury the pump deep in the water.

7) Water pump The power cord of the air pump should also be noted.

After finding the contact point of resonance, if it cannot be eliminated, a soft cushion is required, sponge or silicone.