How do you clean a Mastercard range hood? How to clean Wanjiale s range hood

Generally, the cleaning process of range hoods without filter covers is as follows:

First cut off the power of the range hood to ensure personal safety.

The surface of the shell and the grille of the range hood are generally cleaned according to the cycle specified in the manual, and a soft cloth is dipped in a small amount of warm water with neutral detergent for scrubbing. Wipe dry with a soft, dry cloth.

Dismantling and washing of the inner cavity of the wind wheel and volute

1) Unscrew the screws of the cover plate and grille, and remove the cover plate and grille.

2) Then unscrew the fastening screws of the wind wheel and take out the wind wheel.

3) Soak the removed parts in warm water with neutral detergent, wash them with a soft cloth and wipe them dry.

4) Scrub the dirt in the inner cavity of the volute with a soft cloth with a small amount of warm water with a small amount of neutral detergent, wash it with a soft cloth and wipe it dry;

5) Assemble the above parts in the reverse order of disassembly;

6) After installation, check whether the oil circuit of the appliance is smooth and whether the sealing ring on the volute can be sealed;

7) Please clean the wind wheel, volute, grease nozzle and oil drain pipe according to the cycle specified in the manual.

Precautions required for cleaning impellers and volutes:

1) When cleaning, the motor and electrical parts should not be flooded.

2) When cleaning, do not pull the internal connection line hard, otherwise the connection point will be loosened, causing the risk of electric shock.

3) It is forbidden to clean the range hood with flammable solvents such as alcohol, banana water, gasoline and so on to prevent fire accidents.

4) When cleaning, rubber gloves should be worn to prevent the sharp edge of the metal parts from hurting people.

5) The removed parts should be handled gently to avoid deformation, and special care should be taken when cleaning the impeller, and the counterweight of the blade should not be touched or moved, otherwise, it will cause vibration and noise increase of the whole machine.

For those range hoods with filter covers, because the oil smoke has been filtered before entering the inside of the appliance, the internal structure does not need to be cleaned, and only the shell and filter cover of the appliance need to be cleaned according to the cycle specified in the manual. Multi-graph.

Cleaning of the filter grille:

1) Unscrew the screws that hold the grille in place.

2) Soak the removed filter cover in warm water with neutral detergent for 5-10 minutes.

3) Use a soft plastic brush to clean the dirt in the pores of the filter screen, and then wipe it dry with a dry rag.

4) Install the filter cover as before removal.

5) After installation, check whether the oil circuit of the appliance is smooth and whether the sealing ring on the volute can be sealed.

6) Please clean the filter screen cover according to the cycle specified in the manual.

The internal electrical connection and airflow sealing parts of the range hood should not be disassembled and washed frequently. Frequent dismantling and washing of the sealing ring can easily lead to aging and deformation, and oil stains can easily enter the electrical connection parts of the appliance, affecting its safety performance and reducing the service life of the range hood.

Precautions Remember to cut off the power supply.

Scrub with warm water with a neutral detergent and then use a dry cloth.

Oh thanks.

How to clean a range hood?

To clean Wanjiale range hood, you need to prepare: toothbrush, special cleaning agent for range hood, paper, watering can, and the detailed cleaning steps are as follows:

1. First of all, spread the paper on the stove under the range hood to prevent the stove from being soiled during the cleaning process.

1.First of all, the range hood should be turned on, the detergent should be sprayed on the fan blades and the inner wall, and the centrifugal force when the machine rotated should be used to shake off the softened oil stain first, and then wipe the inner wall clean.

2.Pressure cooker steam flushing method. Boil the cold water in the pressure cooker, remove the pressure limiting valve when the steam is continuously discharged, open the range hood, and align the steam water column with the rotating fan blades, because the high hot water steam continues to rush into the fan blades and other components, the oil and sewage will flow into the waste oil cup along the road until there is no oil in the oil cup.

3.Detergent, vinegar soaking method. Remove the range smoke impeller, soak it in a basin of warm water mixed with 3---5 drops of dish soap and 50 ml of vinegar, soak for 10-20 minutes, and then scrub with a clean rag.

The housing and other parts are also cleaned with this solution. This method has no damage to people, no corrosion to the device, and the surface still retains the original luster after cleaning.

4.For old oil stains, spray with oil cleaner and wipe with newspaper or a damp cloth.

5.Liquid soap surface application. Make the soap into a paste, and then apply it to the surface of the impeller and other devices, after the range hood has been used for a period of time, remove the impeller and other devices, wipe it with a rag, and the oil stain will be off.

6.New oil stains can be wiped with a dry cloth while hot. There is black ash on the tile stove, which can be wiped with half a lemon.

How to pull down the board in front of you.

Summary. Hello dear!

How to disassemble the Mastercard range hood is as follows:

Most of the panels of the range hood are on both sides of the fuselage with clip cards, we only need to pull the panels on both sides of the range hood and then use it hard, pull down the panel to loosen, and then open the combination of the panel of the hood and the filter, and finally gently hold the panel of the range hood and slowly put it down.

How to disassemble the Mastercard range hood.

Hello dear! How to disassemble the pants of the Mastercard range hood is as follows: most of the panels of the range hood are on both sides of the fuselage with clips and wheels, we only need to pull the panels on both sides of the range hood and then use Tong Yin hard, pull down the panel to loosen, and then open the combination of the smoke pump panel and the filter, and finally gently hold the panel of the range hood and slowly put it down.

How to disassemble and wash. Hello dear! Gently lift the range hood up, align the card notch, and lift it out.

Range hood is one of the indispensable tools in modern kitchens, which can effectively eliminate fumes and odors in the kitchen. However, after the use of long orange hidden time, the inside of the range hood will be stained with eggplant touch oil, if not cleaned in time, it will lead to the shortening of the service life of the range hood and the hidden danger of fire safety. So, how do you clean a Mastercard range hood?

Let's take a look at the specific cleaning method.

1.Clean the filter: The filter screen of the range hood is a key part of the fume purification and needs to be cleaned frequently.

After removing the strainer, gently scrub it with detergent and brush, and then rinse it off with clean water. Be careful not to brush with wire balls or hard objects to avoid damaging the filter.

2.Clean the surface of the range hood: During use, there will be oil stains and dust on the surface of the Mastercard range hood, which needs to be cleaned frequently. Wipe the surface of the hood with a damp cloth, and if the stain is stubborn, you can use a detergent appropriately, but do not use acidic and corrosive detergents.

3.Clean the inside of the range hood: The grease deposition inside the range hood is more serious, and it is more difficult to clean.

It is recommended to ask professionals to clean it regularly to avoid secondary pollution caused by incomplete cleaning. If you clean it by yourself, you need to disassemble the hood shell first, clean the internal oil dirt with detergent and brush, and then rinse it with water.

4.Drying and installation: After cleaning, the range hood needs to be disassembled and opened in a ventilated place, and then installed after drying. Before installation, check whether each part is installed firmly to avoid danger caused by unstable installation.

In short, Mastercard range hood cleaning needs to be carried out regularly to ensure its fume purification effect and service life. At the same time, it is necessary to pay attention to the safety and trembling during the cleaning process to avoid accidental injury.

Summary. 1.Take a plastic bottle, all kinds of beverage bottles that can be pinched flat by hand, poke more than 10 small holes in the lid with a sewing needle, and then, fill it with an appropriate amount of detergent, and then fill it with warm water and shake evenly.

2.Start the range hood and spray the cleaning liquid with a plastic bottle full of cleaning essence to the part to be washed, at this time, you can see that the oil and dirty water flow into the oil storage hopper together, and pour it when it is full. 3.

After the cleaning solution in the bottle is used up, continue to prepare and repeat the cleaning. Until the dirty water flowing out becomes clear, depending on the degree of fouling, it can be rinsed after 3 times.

Take a plastic bottle, and you can use your hands to pinch all kinds of beverage bottles.

Excuse me, but please go into more detail?

1.Take a plastic bottle, all kinds of beverage bottles that can be pinched flat by hand can be imitated, poke more than 10 small holes in the cover with a sewing needle, and then, fill it with an appropriate amount of cleaning essence, and then add Zhaoliang full warm water and shake evenly. 2.

Start the range hood and spray the cleaning liquid with a plastic bottle full of cleaning essence to the part to be washed, at this time, you can see that the oil and dirty water flow into the oil storage hopper together, and pour it when it is full. 3.After the cleaning solution in the large width of the bottle family is used up, continue to prepare and repeat the cleaning.

Until the dirty water flowing out becomes clear, depending on the degree of fouling, it can be rinsed after 3 times.

Hello dear, happy to solve the problem for you, <>

How to wash the Mastercard range hood; 1.First cut off the power of the range hood to ensure personal safety. 2. The shell surface and grille of the range hood are generally cleaned according to the periodic shirt specified in the manual, and a soft cloth is used to scrub with a small amount of warm water with neutral detergent.

Wipe dry with a soft, dry cloth. 3. Dismantling and washing of the inner cavity of the wind wheel and volute: (1) Unscrew the screws of the cover plate and the net cover, and remove the cover plate and the net cover.

2) Then unscrew the fastening screws of the wind wheel and take out the wind wheel. (3) Soak the removed parts in warm water with neutral detergent, wash them with a soft cloth and wipe them dry. 4) Scrub the dirt in the inner cavity of the volute with a soft cloth with a small amount of warm water with a small amount of neutral detergent, wash it with a soft cloth and wipe it dry; 5) Assemble the above parts in the reverse order of disassembly; 6) After installation, check whether the oil circuit of the appliance is smooth and whether the sealing ring on the volute can be sealed; (7) Please clean the wind wheel, snail or leaky shell, grease nozzle and oil discharge pipe according to the cycle specified in the manual.