How to solve the problem of Supor ball kettle electric pressure cooker cooking time limit pressure v

At the same time, the opening and closing knob designed at the top of the middle is very rounded, the upper rotation is unlocking, and the lower rotation is locking, and the front cover opening button cannot be opened in the locked state. The middle of the knob is designed with Supor's unique breathing lamp design, which is blue during cooking or when there is pressure in the pot, and green when the lid can be opened safely. The back of the top cover is a steam cover, which is used to slow down the steam emitted under pressure to avoid accidental injury, and to prevent plugging and leakage, which is safer and more intimate than those pressure cookers that go straight to and fro.

To remove the steam lid, the red button is the non-opening valve button, which can help to open the lid when the pot is clogged and cannot be opened. (Use only when blocked, do not press when there is pressure). Open the lid of the pot, there is a small detail here, that is, the lid is not directly popped out, but set a certain damping, the lid will not appear abrupt, but also reduce the occurrence of accidents.

Some people may think that the most important thing about the pressure cooker is the inner tank or the heating method, but in fact, the design of the lid is the most detailed and the key to whether your cooking is good. It contains essential functions such as anti-blocking, safety, anti-overflow, and temperature measurement. The machine adopts the eighth generation of titanium precision control technology, and a titanium precision control probe is designed in the middle of the inner pot cover, remove the temperature column nut, and hold down the safety valve and turn the inner pot cover counterclockwise to complete the separation.

Different from other rice cookers and pressure cooker products, the water storage box of this machine is designed on the inside of the pot, and when cooking is completed, the condensation with the lid is opened and the condensation drops into the water storage box with gravity, which is very convenient for cleaning because the water storage box has almost no depth.

The rice soup bubbles out, indicating two points, the rice soup is tumbling violently in the pot, and the rice soup contains a lot of starch and produces bubbles that have no time to be eliminated. If the amount of cooked rice is less than half of the maximum amount, either wash the rice several times, but most of the B vitamins are washed away, or after washing the rice, add water to soak it thoroughly, so that the rice absorbs enough water, so that the amount of water free outside the rice is less, and the bubbles generated when the electricity is heated are easily eliminated by the rice grains.

No seals are installed. Solution: This one is easy to check out. Attach the sealing ring and you're good to go. Be careful to use seals of the same size.

2.Food residue sticks to the upper end of the sealing ring or inner tank, resulting in a poor seal. Solution: Check the perimeter of the sealing ring and the upper end of the inner tank to see if there is any residue, and clean it up. The seal can also be removed and cleaned up.

3.The seal is aged and cannot be sealed. Solution: Remove the sealing ring, check it, if the elasticity is not good and a little hardened, then replace it with the sealing ring of the same specification.

4.There is a foreign object on the bottom of the rice cooker, which causes the inner tank to not lie flat. Solution: Inspect and clean the bottom of the electric pressure cooker.

5.The upper end of the inner tank is uneven. This is rare, for example, when the inner tank is broken.

Summary. The Supor electric pressure cooker is abnormal when the safety valve keeps deflating while cooking. The solution is to dredge the exhaust pipe under the pressure limiting valve, because the situation that has been deflated is caused by the blockage of the exhaust pipe, so the abnormal working condition can be lifted after the exhaust pipe is unobstructed.

The Supor electric pressure cooker is abnormal when the safety valve keeps deflating while cooking. The solution is to dredge the exhaust pipe under the pressure limiting valve, because the situation that has been deflated is caused by the blockage of the exhaust pipe, so the abnormal working condition can be lifted after the exhaust pipe is unobstructed.

Hope mine is helpful to you! Pro-3

are all dredged, and the high-pressure exhaust valve has been exhausting.

are all dredged, and the high-pressure exhaust valve has been exhausting.

There is a problem with the vapor tightness of the exhaust valve. This problem, don't do it yourself at will, it's best to hit the manufacturer's after-sales service, and let them come to see if you can.

The rubber ring inside the exhaust valve is loose, and the rubber ring is replaced.

Good. Find after-sales maintenance, thank you.

Good. Find after-sales maintenance, thank you.

You are welcome. If you are satisfied with my reply, please give me a thumbs up, thank you! Have a great day! [than the heart] [than the heart] [than the heart].

Causes of Supor electric pressure cooker leakage:

1. The sealing rubber ring is aging and needs to be replaced.

2. The exhaust nozzle is loose and can be tightened.

3. Replace the gasket if the seal is bad.

4. The inner tank side is collided and deformed, and it is directly replaced.

5. Replace the exhaust valve pin if it is damaged.

6. Air leakage caused by overpressure needs to be sent for repair to measure the pressure.

The electric pressure cooker is an upgraded product of the traditional pressure cooker and the rice cooker, which combines the advantages of the pressure cooker and the rice cooker, completely solves the safety problem of the pressure cooker, and relieves the safety hazards that have plagued consumers for many years with ordinary pressure cookers, and its thermal efficiency is greater than 80%, saving time and electricity.

1. The inner pot mouth is deformed.

Solution: Replace the inner pot.

2. Failure of the inner pot cover, sealing ring, sealing fixing ring and other parts.

Solution: Repair the inner pot lid, remove the hair-stripping of the sealing ring or replace the sealing ring.

3. Ball pad rupture or size deviation.

Solution: Replace the ball pad.

4. Blockage of rice milk or foreign bodies caused by exhaust.

Solution: Clean the ball pad and steel ball regularly.

5. The ball gasket sealing ring is broken or the steel ball is deformed.

Solution: Replace the ball gasket seal ring or steel ball.

Summary. The Supor electric pressure cooker has been venting all the time during the cooking time.

Hello dear, the lid is not covered: this is definitely the most common reason, generally it is the first time to use the electric pressure cooker or is not familiar with the electric pressure cooker, resulting in the lid is not covered, when you turn on the electricity, there will be exhaust phenomenon, of course, it will be boiled for a while, and it will not appear when the electricity is turned on at the beginning.

Solution: This is relatively simple, just cover the pot, the normal electric pressure cooker is to put the lid on the inner tank, and then rotate clockwise when the finger on the lid is aimed at the corresponding place of the inner tank. Hope it helps.

The Supor electric pressure cooker has been venting all the time during the cooking time.

Supor electric pressure cooker in the cooking time pressure valve has been exhausting your pants, the lid is not covered: this is definitely the most common reason, generally is the first time to use the electric pressure cooker or unfamiliar with the electric pressure cooker, resulting in the lid is not covered, when you turn on the electricity, there will be the phenomenon of exhaust Hu Bumping the cover, of course, it will have to cook for a while to appear, and it will not appear when the power is turned on at the beginning. Workaround:

This is relatively simple, as long as the lid is covered, the normal electric pressure cooker is to put the lid on the inner tank, and then rotate clockwise when the finger on the lid is aimed at the inner tank to the noisy place. Hope it helps.

The cover is no problem, the air is out in the small hole of the braiding edge, and the hole does not bounce up after the water is opened, how can I solve it?

The cover is no problem, the air is out in the small trapped hole on the edge, and the small hole does not bounce up after the water opens, how can I solve it? There are generally several situations in which the safety eye of the electric pressure cooker does not rise: 1. The safety eye may be stuck by foreign objects, which will cause the safety eye to not be used normally.

2. The rubber ring of the pressure cooker is damaged and the sealing is not tight, which will lead to the normal use of the safety eye. 3. If the pressure is not reached, the inspection will rise, which will also affect the normal use of the safety eye. It is recommended to contact customer service and communicate the specific situation with the customer to ensure that the pressure cooker is safe to use!