Kunlun Watch Warranty Where to repair the watch by magnetism

Magnetic fields are everywhere, and it is impossible to prevent it, and Hublot watches, which have always been very accurate, suddenly have a time error, and the first thing to guess is whether the watch is magnetized. There are many steel materials in Hublot mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, so the watch is very susceptible to magnetization. Once the Hublot mechanical watch is magnetized, the first situation that will affect it is that the watch is not accurate, there is an error, and in the serious case, the watch stops.

Moreover, in the development of today's social life, more and more electronic products appear around us. Therefore, the magnetic field is present around us, and there is only a difference in the strength of the magnetic field. Various types of permanent magnets are also widely used in electrical appliances, typically speakers and motors, and both magnets and DC magnetic fields can magnetize "hard magnetic" materials such as steel.

There is also the magnetic buckle on the leather bag, and the watch and credit card are the most afraid of being stained with magnetism. Hublot mechanical watches are generally magnetized to go fast (serious will stop), if the hairspring is stuck together, then the Hublot watch will go faster, about 2 hours or so faster. Steel parts are most susceptible to magnetization, including escape wheels and pallet forks.

The simple way to tell is to use a sensitive point compass and lay it flat. Then the Hublot watch is quickly skimmed over the top of the compass at close range, and this action also requires changing the watch a few more directions, and then repeating. As long as the needle of the compass moves, it means that the watch has been magnetized.

The principle of the demagnetizer is that it can produce an alternating magnetic field, and if the watch is placed in this magnetic field, it will be demagnetized, and if it is a constant magnetic field, it will be magnetized. Demagnetizers can be bought or made by themselves, and generally professional watch stores have demagnetization services. Moreover, in your daily life, you must be careful not to place your watch near or near electrical appliances that generate magnetic fields (such as stereos, refrigerators, computers, etc.), or magnetic objects (such as magnets, mobile phones).

Hello, it is possible that the watch is magnetized or the power is insufficient. Once the magnetism on the watch is all of a sudden, it goes very fast, even 1-2 hours a day.

When wearing mechanical watches, pay attention to keep away from magnetic fields, such as stereos, televisions, mobile phones and other electrical appliances. Magnetization is a common phenomenon nowadays, and the solution is not difficult, just go to the watch for repair and demagnetization, or bring your own demagnetizer, it only takes 30 seconds to demagnetize the watch, and there is no impact on the performance of the watch.

Magnetization of the watch: Many things with magnetic fields are often together with the watch, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate. After being magnetized, the watch may stop, slow, or fast.

After the watch is magnetized, its magnetism will not recede by itself, in which case it can only be demagnetized. Therefore, you can only go to a professional watch repair center for demagnetization so that it can return to normal.

The official after-sales outlets of Kunlun Watch are as follows:

1. Beijing Kunlun after-sales service center (international trade store).

2. Beijing Kunlun after-sales service center (Wangfujing store).

3. Shanghai Kunlun after-sales service center (Ganghui store).

4. Shanghai Kunlun after-sales service center Kuanque (Ganghui store).

5. Shanghai Kunlun after-sales service center (Hongyi store).

The brand history of Corum watch:

The brand began with René Bannwart, whose entrepreneurial spirit and the experience he gained from the world's leading watchmaking houses allowed him to create his own brand, which led him to establish his own watchmaking brand with his uncle Gastonries in 1955.

René Bannwart is a big fan of the Latin word "quorum", which refers to the minimum quorum that an organization can effectively decide, and by extension, the most basic elements that make things work. However, René Bannwart simplified its spelling to corum, which he used as the brand's English name.

Since its founding in La Chaux-de-Fonds in 1955, Corum has aspired to be at the forefront of the Swiss watch industry. The brand's logo is a key to the sky, symbolizing understanding the mysterious, solving the unknown, exploring new territories and relentless innovation. It also represents the creativity, perseverance, and bravery required to fully grasp the mysteries of time.

In 1956, the first Corum watches were launched, and at the same time the brand launched a series of innovative and highly successful watchmaking concepts. Its innovative ideas have even been recognized by peers in the industry, becoming one of the most innovative brands in the industry.

In 1966, Jean-René Bannwart, the founder's son, joined Corum and created Corum to create Corum its famous Admiral Scup.

The above content is referenced: Kunlun official website - Kunlun after-sales service center.

When the watch enters the water, it should be done according to the following methods, first, when the watch enters the water and fog, the easiest way is to wear the watch on the wrist, that is, let the watch reflect inward, and the bottom shell of the watch is facing outward. After a few hours, you will notice that there is less and less moisture in the watch.

Second, prepare some paper towels or moisture-absorbing flannel, wrap the watch tightly, place it on a 40-watt light bulb about 5 cm, and bake it in a medium way for about half an hour. After that, you will notice that the moisture in the movement slowly disappears.

Thirdly, fog vapor can also be removed by basking in the sun. First open the back cover of the watch, then wrap the watch completely with a paper towel or moisture-absorbing flannel cloth, and take it to the sun for most of the day to remove the moisture in the movement. If the watch is seriously flooded, you can go to [8th Floor, Block E1, Oriental Plaza Office Building, No. 1 East Chang'an Street, Dongcheng District, Beijing].

Fourth, after the watch is flooded, you can first open the back cover of the watch, remove the battery, and use the hair dryer to aim at the watch on low gear. After blowing until it is completely dry, reattach the back cover. When installing, you can also check whether the sealing ring is aging and broken, and remember that the back cover must be fastened if it is in good condition.

Fifth, dry the granules with silica gel. Put the silicone granular substance in a closed container with the watch that has accumulated water, and after a few hours, remove the watch and the water will disappear.

If the watch needs to be repaired or maintained, or other needs, it is best to go to the center, which not only has more professional technicians and better services, but also its instruments will be more precise. ** It will not be reported like other places, there are standards. If the back cover is opened in other non-designated places, it is a yard that cannot enjoy the warranty with the mold.

1. Wear the watch backwards. You can also put the mask facing inwards and the bottom shell facing outward, and wear it on the wrist backwards, and the moisture can be eliminated after two hours. If the water ingress is severe.

It is best to send it to the watch shop immediately to remove the water in the watch, because if there is too much water in the mechanical watch, there is no way to dry it in time by adsorbing it from the outside, or drying it.

2. The watch belongs to the precision machinery, whether the water into the watch has an impact on the watch accessories, this is not certain, Yunzhilu has to see if the water into the watch is very serious, and how the waterproof of the watch is. If it is only the watch of the watch that is fogged, it is estimated that the water ingress of the watch is not serious. If it causes the watch to slow down, not to go or other problems, it is estimated that it will have an impact on the watch accessories.

Therefore, it is recommended to go to a professional watch repair center to test it, and the general inspection is free.

Chengdu after-sales service center is located in Room 05, 24th Floor, Sichuan Airlines Plaza.

We've built an excellent network of repair service centers to ensure that you can enjoy our premium service. Our Repair Service Centres are carefully selected and certified to meet the most stringent quality standards.

Those who make an appointment in advance can get a discount code for free: cut the strap, detect the speed of the head, clean the appearance, degauss, test the movement, and add the strap (you need to bring your own watch section).

Generally, it will be divided into two situations, the first is that the battery of the watch is about to run out, and the stop-and-go is due to insufficient power, and occasionally the battery voltage is unstable; The second is that the watch is disturbed by the magnetic field, and this phenomenon will occur when the quartz watch is generally disturbed.

General maintenance methods for watches that go and stop:

The problem of watch time and time stop can be divided into regular steal stop watch and irregular stop stop watch 1Regular steal stop meters.

This type of failure is usually divided into mechanical failures, such as gear meshing that gets stuck in dirt or parts layout damage. As long as the debris that causes the failure is removed and trimmed in pairs, the friction and jamming can be eliminated. You can go to [8th Floor, Block E1, Oriental Plaza Office Building, No. 1 East Chang'an Street, Dongcheng District, Beijing].

2.Irregular steal stops.

1) Due to the influence of unreasonable clearance between mechanical parts, the watch is stopped.

2) The electronic components of the circuit part are soldered.

3) Loosen the fixing parts or tighten them at the end of the screw.

4) The battery is not fixed stably and reliably.

1. For the repair or replacement of Kunlun watches, the parts under the repair and replacement shall be owned by the authorized unit.

2. If the product fails due to the opening and modification of the product at a non-Kunlun watch authorized maintenance point, it is not covered by this warranty 3. According to the product use and maintenance instructions in the Kunlun watch package, the warranty period does not include any normal wear and tear due to the appearance of the belt and watch.

Fourth, the Kunlun watch is exposed to extremely high or low temperature environment, the crown is not locked, etc., which can easily lead to moisture infiltration into the watch and even liquid ingress, improper operation is not within the scope of Kunlun watch warranty.

5. Please properly keep the certificate of purchase of Kunlun watches, Kunlun watch warranty card and other documents, do not open the case and battery back cover by yourself, in order to get effective and perfect after-sales service, if the maintenance certificate is cut or deleted, the company reserves the right to refuse to provide warranty services.

The latest addition to Corrum's elegant Admiral's Cup Legend 38 model collection is a dazzling jewel in a High Jewellery watch style. The watch is set with some 1,444 gemstones, totaling cards, and these diamonds and sapphires are like the soul of a movement, forming an intoxicating symphony. This work of art is a piece of beauty with hand-concealed inlay and snowflake inlay, showcasing the craftsmanship of the craftsmanship and stunning beauty.

The watch is inspired by three elements: pattern, femininity and glamour. The first step in the design of a watch is to create a design sketch based on the theme of Corum watches, with the most immaculate gemstones set in the watch. The design of the watch is a masterful art of gemstone setting, in which the size, cut and colour of the stones used in the design are carefully selected to ensure that the stones are perfectly set on the face, the outer ring, the case, the rotors, the strap and the clasp.

Once the gem-setting sketch has been completed, the gem-setting work can be carried out. The gem-setting of the entire watch begins at the surface and is made using the most demanding concealed setting technique. The floral motif is set with 468 gemstones of seven different sizes, further adding to the complexity of the setting.

In the traditional setting, a notch is cut out in the gemstone to fit into the setting, and the smallest stones can be damaged. Therefore, the artisan used a new setting method, inverting the pattern of the gemstone on the surface and setting it on a transparent plate and carefully laying an alloy with silver as the main ingredient to fill in the tiny gaps between the gemstones. The gemstones to be set on the face include 24 baguette-cut purple sapphires (yoca), 138 baguette-cut diamonds (yoca), 108 baguette-cut pink sapphires (yoca) and 198 brilliant-cut diamonds (yoca), which are tightly interlocked to form a disc with a floral motif.

The disc can be set in white gold by removing the transparent plate and polishing it, while the underlying metal structure is perfectly concealed, allowing the gem to shine brightly.

Kunlun after-sales maintenance center is located in: Tianjin International Finance Room 3003, No. 136 Chifeng Road, Heping District, Tianjin

1. Watch magnetization: Watch magnetization is one of the common reasons why watches slow down, even if it is an anti-magnetic watch, even an anti-magnetic watch can not be placed next to some electrical appliances, because some of his parts are not anti-magnetic, and they will still be magnetized over time. The watch is magnetized and needs to be demagnetized by a professional watch repair facility.

2. Insufficient power: mechanical watches are divided into two types: manual winding and automatic winding. Lack of power is often an important reason for the watch to slow down or even stop.

Mechanical watches that are wound by hand can solve the problem by winding, while watches that are self-winding are mostly due to insufficient wearing time (less than 8-10 hours a day) or people who exercise a little bit. Friends in the general office or the elderly often have a mechanical watch with insufficient power, causing the watch to slow down.

3. Mechanical failure caused by insufficient maintenance: daily wear is not paid much attention to, and there are problems such as collisions, which makes the internal parts of the watch loose and causes the watch to be inaccurate. Dust, foreign matter, so that the gear teeth are stuck with each other, and some watches are too much or very little oil, which will make the electronic watch go badly.