Haier washing machine not running, does anyone know what the problem is? 20

If the Haier washing machine doesn't work, it may be that there is a problem with the engine, you listen to whether there is a humming sound, but the turntable at the bottom does not rotate, that is, the motor is broken.

I think it's still not working, it's a sign that there's a problem with your brake pads underneath.

There are still 10 that are not running, this may be a failure in the support **, or find a maintenance personnel to come to take a look.

You can**consult Haier's after-sales service**, and there will be professionals to give accurate.

How the hell is this thing supposed to work? It's not simple, but if you don't run a seat, what should be the problem? I saw the maintenance staff, how can I serve.

The Haier washing machine is not running, one is out of power, two, the water pressure is not enough, and the third machine is malfunctioning, which one do you see? If it is the reason for the machine, find a maintenance master to come to the door.

The washing machine is not running, uh, there should be a lot of people who know what the problem is, and I think the main reason should be the machine.

The washing machine is not running, you can go to see a specific fault, and she can also consult the customer service here after maintenance.

If it doesn't work, it should be when your running appliance is broken, so you can replace a capacitor.

Haier washing machine not running, does anyone know what the problem is? I think it's possible that it's a problem with the circuit board now, and I think you need to get a professional to deal with it.

Reasons: 1. The power grid voltage is too low, and the output torque of the motor will not reach the specified value, so that the drum cannot be driven. 2. Too much washing is placed, which exceeds the rated weight and makes the motor overloaded.

3. When the transmission belt slips or falls off, the torque of the motor cannot be transmitted to the running parts, which will cause the drum to not rotate. 4. When the capacitor is damaged by the washing machine, there is a short circuit, open circuit, or aging line, which will affect the start of the washing machine. Suggested Treatment:

1. It may be because the grid voltage is too low, first of all, check whether the power supply is within the normal voltage range, if it is lower than the normal range, the power supply should be cut off, or the external booster should be connected to control the voltage within the normal range. 2. The washing machine cannot operate normally, or it may be because the carrying capacity is exceeded, and the clothes can be divided into two batches for cleaning. 3. The transmission belt slips or falls off, at this time, you can use the screw screw to unscrew the fixing screw on the back cover plate of the washing machine, remove the rear cover plate, and check whether the V belt is worn or fall off.

4. If the washing machine cannot operate normally due to the damage of the capacitor, contact the washing machine manufacturer to repair or replace the capacitor after service.

Reasons why Haier washing machines are not working:

1. If there is a power outage at home, you can check whether the washing machine is powered on normally.

2. The internal motor of the washing machine is damaged, or the computer board is faulty.

3. The washing machine is not plugged in, just connect the power supply normally.

Knowledge Expansion] How to clean a washing machine:

1. Prepare professional cleaning agent. Choosing a professional cleaner can reduce the damage to the fuselage.

2. Pour the cleaning agent into the water, mix the cleaning agent and water in the ratio of 1:2 and then pour it into the washing machine, enter the working state of laundry, repeat at least 2 times, and then the dirt can be removed.

3. Clean the filter. There is another place to pay attention to is the filter, this place should not be ignored, after cleaning the fuselage, take out the filter to clean, and you can use a brush to brush it clean when cleaning. This filter must be cleaned frequently, otherwise it is easy to clog and affect work efficiency.

4. Clean the drum. Prepare the rice vinegar.

Baking soda, pasteurized.

disinfectant, completely moisten a towel with vinegar, put it in the washing machine, and turn on the dehydration mode, which is equivalent to spraying vinegar on the inner wall of the washing machine. Then turn the washing machine water level to the maximum and put the baking soda.

Dissolve in water and soak for 2 hours. Then turn the washing machine to normal washing mode for rinsing. Finally, pour the pasteurizer into the water according to the stated proportion, turn on the rinse mode and wash it twice, and you're done.

The reasons and solutions for the washing machine only ringing are as follows:

1. If the washing machine only makes a sound, but does not run, we can first turn off the power, open the lid of the washing machine, take out all the clothes, and then turn on the power, turn on the washing machine, and see if the barrel of the washing machine can run normally.

If it can run normally, it means that the clothes in the bucket may be stuck on the edge of the bucket before, which affects the power of the bucket, at this time we only need to be careful when placing the clothes, and the ants can restart the washing machine to prevent the edge from being stuck.

2. If there is only sound in the washing machine after turning on the washing machine, but the internal motor is not running normally, it means that there is a problem with the motor, which may be burned out of the motor, or it may be that the capacitor or the circuit board inside the motor are burned out. The specific situation requires us to disassemble the washing machine, check the wiring facilities inside the washing machine to determine, if you do not understand the knowledge of the line, you can ask professional maintenance personnel to check.

3. If this situation occurs in the washing machine we just bought, we can first rule out the problem of the motor and the line, and check whether the protective cover of the motor has been removed. If there is no problem here, take a look at whether the belt on the motor is loose, and if it is loose, re-fix it and then turn on the washing machine.

Common faults of washing machines

1. The washing machine with a long period of use often has a weak button, we can check whether the corresponding circuit board is faulty, if the circuit board is faulty, you can replace it directly.

2. The washing machine has not finished washing the clothes and stopped working, and the lid of the washing machine was opened and the clothes were found to have not been dehydrated, which may be a problem with the voltage at home, or it may be that the circuit inside the washing machine is under load, or some circuits are not in good contact and need to be repaired for the part with the problem.

Washing machine washing does not turn treatment method:

1. Connect the power supply and start the work first, and listen to whether the motor has any sound;

2. If the motor makes a buzzing sound but the washing bucket does not rotate, it may be that its starting capacitor is faulty and needs to be repaired or replaced;

3. If the motor does not make a sound, it may be that the switch of the dehydration bucket cover is faulty, and it is necessary to ask professional maintenance personnel to repair it.

Washing machine buzz does not wash the solution:

1. The starting capacitor of the motor is damaged, the motor cannot start, and there is a buzzing sound. Treatment: Replace the motor starting capacitor.

2. The damage of the starting winding in the motor will also cause the motor to not start, and the motor will make a buzzing sound. The only way to deal with it is to wind the coil windings of the electric surplus machine from the new, or replace it with a new motor.

Note: When the washing machine makes a humming sound, regardless of the above reasons, the power supply to the washing machine must be cut off immediately.

3. If the water inlet solenoid valve rings, then it may be that the water level sensor is faulty or the water level pipe is leaking, resulting in water ingress, because the computer board has not read the signal that the water level has been reached, so it has been supplying power to the water inlet solenoid valve.

4. If it is the humming sound of the motor, then it is caused by the decrease in capacitance value, and you can change the capacitor.

Hello dear! We are glad to answer for you: There are many possible reasons why Haier washing machines do not move, and here are some common problems and solutions:

1.Power supply problem: First of all, check whether the plug is plugged in tightly, whether the wire is damaged, and whether the power supply is normal.

If the power supply is normal, but the washing machine still does not respond, it may be that the circuit board is faulty, and Nasong needs to find a professional maintenance personnel to overhaul it. 2.The washing machine lid is not closed:

Some washing machines will set a safety switch so that if the lid is not closed, the washing machine will not start. Check that the lid is closed, and if not, turn it off and start the washing machine again. 3.

Faucet is not open or water pressure is insufficient: Check that the faucet is open and the water pipe is not blocked. If the faucet is turned on, but the water pressure is insufficient, the faucet may need to be cleaned or replaced.

4.Washing machine own problems: If the above problems do not exist, it may be that the washing machine itself is faulty, such as motor failure, transmission system failure, electronic control board failure, etc., you need to find professional maintenance personnel to overhaul and repair.

In short, if the Haier washing machine does not move, you need to check the power supply, water source and other problems first, if the problem still exists, you need to seek the help of professional and technical personnel to solve the problem.