How to make a game console Simple, how to make a simple game console

Here's how to make a game console:Prepare a pair of scissors, a carton, and tape, and cut the carton from the middle, so that there are three sides with paper edges, leaving one centimeter on each side, and there is no paper edge on one side, so cut a long strip with a width of one centimeter and the same length as other sides, fold the four sides up, paste them with tape, and cut three strips with a width of one centimeter, and the length is two centimeters shorter than the length of the pasted box.

A game console is a computer system that is primarily used for entertainment and uses a television or other specialized display and a dedicated input device using sources** that are only available to licensed software developers. The biggest difference between it and a personal computer is the closed nature of the source** and the software.

Broadly speaking, the mechanical and electronic devices used by humans to play games can be called game consoles. With the development of electronic technology and information industry, as well as the drive of the film and comic industry, video game consoles have become the actual representatives of game consoles. Due to its more specialized gameplay performance, even with such a developed level of computers, PC games still cannot replace the strong position of game consoles.

Maybe it's the kind of game console that doesn't have a display, so it's easier for him to make some of the chips in it, and it's easier to construct.

How to make a simple game console for game consoles, simple ones can't be done by yourself, this must be purchased.

This requires you to first learn the physics knowledge of junior high school, then connect the electrical board, and then according to a certain level of technology.

Take making a gravity ball game machine with a cardboard box as an example, and the method is as follows:

Tools required: paper boxes, scissors, tape, marbles.

1. Prepare a pair of scissors, a carton, and tape.

2. The carton is cut out from the middle, so that three sides are edged with paper.

3. Leave one centimeter on each side, cut it off with one side, there is no paper edge, cut a long strip with a width of one centimeter and the same length as other sides.

4. Fold the four sides up and attach them with tape.

5. Cut three strips one centimeter wide and two centimeters shorter than the length of the pasted box.

6. Stick three long strips on it vertically, one to the right, one to the left, and one to the right.

7. Put a bead in one end and shake it left and right to let the pillar run to the other end. The carton game machine is ready.

Here's how to make a console:

1. Method 1.

1. First prepare two pieces of 15*17 cm cardboard, one of which is dug out in the middle. Make a hole in the middle of the plastic bottle cap with a hole punch and thread the disposable chopsticks into it. Attach a piece of paper slightly higher than the cap to each end of the chopsticks to support the cap to rotate, and then glue it to the large cardboard.

2. Then wrap a rubber band around the disposable chopsticks to increase the friction. Draw a race track. Thread the painted racing track under the chopsticks, and connect the two ends with double-sided tape.

Thread a thin rope underneath the racetrack, knot the ends of the rope and put it on the bottle cap on the left side, then glue a small car in the middle of the rope above the racetrack.

3. Cap with the piece of cardboard that was dug up in the middle at the beginning. Sealed with cardboard on all sides. Finally, attach a piece of colored cardboard so that you don't have to paint it. Flipping the left cap can make the racing track move, and the right cap controls the car to move left and right.

Second, the method of two-volt state.

1. Use the printer to print out the color scene drawings first, and then splice them together with glue.

2. Make obstacles on the scene drawings.

3. A sensor should also be placed inside, and when the player-controlled car collides with it, the sensor will detect the leak and display a "game over" prompt.

4. Next, start to install the scene map, put the map around the two cylindrical rollers, and when the rollers rotate, the map also rotates in a loop.

5. Then install small parts such as batteries and electric motors.

6. Attach the game sports car to the magnet and attach it to the scene drawing.

7. Finally, use corrugated paper to encapsulate the entire game console.

8. Completion.