Is the vertical type of liquid compression pipe machine used more than the horizontal type, and why

Through mechanical transmission, the steel pipe is driven to rotate, and one end of the steel pipe is heated with a flame, and when a certain temperature is reached, the heated steel pipe head is rushed with a forming die until the required shape is reached.

Structure: A ground plate is welded with channel steel, and the power end is equipped with a motor, reducer, and clamp head (for clamping pipes, which can be replaced by lathe chucks). The other end is installed with a support seat (which can be opened), and a heating ring (8-10 nozzles, welded on a copper pipe ring with gas welding) on the outer end of the support seat.

The outermost edge is a movable bracket on which an alloy mold is mounted.

Note: The tube shrinking machine of our unit, the support seat, the heating ring, and the mold bracket are fixed on a single base, which is connected with the chassis track and can be transferred according to the required length.

How to use: Secure the tube to the tube shrinker and turn on the heater (ring). When the temperature is reached, the alloy mold is pushed, and the shape of the tube head reaches the requirements. The whole process takes about 15 minutes.

Since we have not explained what the specific fault phenomenon is, I can only talk about the approximate method here. First of all, according to the fault phenomenon, the diagnosis is mechanical or hydraulic reasons, the failure of machinery is easier to see, if the hydraulic system fails, then according to the specific phenomenon, analyze and diagnose the specific cause and fault point, and then deal with it. FYI.

There are a lot of Ren counties here in Xingtai, say okay, it seems that the product reputation of Tianheng Machinery Factory is not bad, just a suggestion, it is better to go to the factory to inspect it yourself!

Yugong reducer: It is easier to shrink the tube.

This particular formula is used to apply.

Because it needs to be determined according to the elongation of the pipe, and there is a direct relationship according to the degree of loss of the mold, the application field is mainly thin-walled pipe reducing, such as: tubular furniture legs, javelins, baseball bats, bicycle handlebars, etc.

Our factory specializes in making steel pipe shrinking machines, and we hope it will help you with your questions.

According to the principle of hydraulics, the larger the hydraulic cylinder, the greater the pressure it can generate.

There are mechanical, the structure does not have a hydraulic tight bundle, and the operation is not hydraulic flexible, and now there are fewer machinery

Lizhe Electromechanical is your good choice.

Zhengzhou Ma's Hydraulic Technology ****.

It is a 220 to 24V power supply, and some parts of the electrical cabinet need 24V power supply.