How to repair the broken zipper of the down jacket?

Under normal circumstances, the zipper of the down jacket can be changed if it is broken, however, it is not recommended to change it at home, as it will easily damage the down jacket. So where can you change the zipper of a down jacket? Let's take a closer look!

1. The teeth of the zipper are lost.

It is a difficult thing to lose the teeth of the zipper, which is likely to cause the zipper to be misaligned and the zipper to fall out. In fact, pliers can be used on the original tail.

Or pry open the zipper teeth to remove a few teeth, install them on the missing tooth site, and then use pliers to gently press the tooth mouth on the edge of the cloth and bite firmly.

2. The zipper is rusty.

Some zippers that are not very well made, after a long time, the zipper will rust, and it will be very unsmooth to pull it intermittently. In this case, you can use the lip balm we usually use to apply it along the zipper and smooth out the entire zipper.

3. The zipper is difficult to pull.

This situation is different from the second situation, the quality of the zipper is good, but it is difficult for us to pull the zipper together, because the position of our zipper puller is loose, or it does not correspond to the position of the pull gear.

We can check whether the slider corresponds to the position of the zipper, and then adjust it and tighten the position of the slider a little.

4. If the zipper is not tightened, open it by yourself.

When a zipper is pulled for a long time, or the workmanship of the zipper is not good. It is likely that the zipper was clearly closed, but the middle of the zipper suddenly opened, and it looked particularly ugly.

This may be because the slider of the zipper has been loosened and it is not possible to hold the teeth together tightly. We can use a tool to clamp the slider of the zipper a little tighter, and then we can solve it!

You can go to the counter and let him return to the factory for repair.

Go to your local regular clothes dry cleaner or a famous tailor shop, give money, and someone will change the zipper for you.

Look for any sewing clothes nearby, and you can change the zipper.

A general tailor shop will do. I just don't know if the color of your clothes is good with zippers.

There are tailor shops near many neighborhoods, or there are shops that make down jackets nearby, and these places can change zippers.

The zipper of the down jacket is broken. You can try to fix it yourself. This requires patience, if you are not patient and careful, you should go to the place where the shoes are repaired, and they will help you fix them.

And you can go to the kind of place where you repair clothes.

The zipper puller next to the down jacket is not cracked, because the cloth on both sides of the zipper is broken, it is difficult to repair itself, so you need to go to the tailor shop to let professionals repair it, and the zipper is used by relying on the continuous arrangement of zipper teeth, and the zipper puller of the down jacket is not cracked, and the zipper needs to be replaced for normal use, so the cracked cloth will cause the zipper puller to be unusable.

Moreover, the zipper is a connecting piece that relies on the continuous arrangement of chain teeth to make items synthesized or separated, and the zipper is organized by the upper and lower teeth of the zipper tooth slider, locking parts, etc. If the cloth on both sides of the zipper cracks, the side pull strength of the zipper will decrease, and the two pieces of the zipper are related to each other, and they cannot be used in the future. Moreover, it is best not to use the down jacket zipper next to the zipper pull, so as not to use it to prevent damage to the down jacket fluff caused by force.

If there is more than a slight crack next to the zipper puller of the down jacket, you can use a needle and thread to sew it, if it is a large area of cracking, you can use the location of the crack and this direction to repair the buried sewing, if it is a slight crack, you can use a small amount of glue to drop it and then bond and shape, if the heavier viscose is ineffective, you need to use professional tools to repair or sew or replace.

If the down jacket zipper puller is not cracked, if it is torn, you must not repair it yourself, you must go to a professional tailor shop for repair and replacement, generally** in 5 to 10 yuan, when the zipper is used again, if the zipper head cloth cracks, the zipper will not be able to work, and the zipper head can not be used smoothly, so it needs to be repaired and then used to prevent damage in other places.

If the cloth is torn, you can only go to the tailor to make a beautiful smashing thread, you can ask, they usually have a way to repair it.

You can ask the master who made the down jacket to fix it, or buy your own clothes to stick it on.

Summary. If the bottom of the zipper is broken, you can cut a straw into two centimeters in length, then cut it from it, fold the straw in half and press it to fix it, and finally put 502 on the drops in the position where the zipper is fixed, and glue the straw on, or buy a new zipper from the market and install it on the clothes with a needle and thread or sewing machine.

If the bottom of the zipper is broken, you can cut a straw into two centimeters in length, then cut it from it, fold the straw in half and press it to fix it, and finally put 502 on the drops in the position where the zipper is fixed, and glue the straw on, or buy a new zipper from the market and install it on the clothes with a needle and thread or sewing machine.

I'm sorry I don't understand, but can you elaborate on that?

1. If the straw is fixed under the zipper, you can use the straw to deal with it. First, take a straw, cut it into two centimeter pieces, then cut it from the middle of the straw, fold and press the straw to make it crease, and finally cover the straw with the broken fixed head, and stick it with 502. 2. Replace the zipper, the zipper is fixed under the broken zipper, and the zipper can be replaced.

First, use scissors or a blade to remove the damaged zipper from the garment, then buy a new zipper from the market and attach it to the garment with a needle and thread or sewing machine. 3. If the needlework under the zipper is broken, it can be repaired with needle and thread. Choose a needle and thread that is not too conspicuous in color, then sew it at the fixed head of the zipper to join the bottom of the zipper together so that the zipper can be used again.

However, this method is only suitable for zippers on pants, not for outerwear and other clothing.

In life, zippers on clothes can easily get stuck in clothes, especially those made of metal. In this case, many people may use brute force to pull the zipper, but this will break the zipper. So what to do if the zipper of a down jacket gets stuck?

1. You can pull the tail of the zipper, straighten the zipper, and then repeatedly pull it from the bottom to the top to check whether it is smooth.

2. The simplest and most effective way is to coat the surface of the zipper with a layer of wax, and use the lubrication effect of wax to achieve a smooth effect. After wiping the surface of the zipper back and forth with a candle, and then pulling it several times from the bottom to the top, the zipper will be smooth.

3. In addition to wax, lubricating oil can also be used, to pick a more transparent and clean kind, after dropping a few drops on the position of the zipper tab, repeatedly pull several times, you can also achieve the purpose of smoothness.

When many people wear down jackets, they will find that the zipper cannot be closed or cannot be opened, etc., which is relatively common. So what to do if the zipper of the down jacket can't be opened? Let's take a closer look!

with pliers. Straighten out the bent tooth Double-check the tooth to see which one is different or protruding, and carefully pull it back with pliers. Use small needle-nose pliers to clamp the teeth one by one. Otherwise, it is very likely that other normal teeth will be accidentally damaged.

Fix the zipper with pliers Sometimes the zipper opens and does not close properly. Use pliers to close the top and bottom of the zipper so it can grab the other teeth. Be careful not to close the zipper so hard that it looks like it's sinking.

If the zipper is fully closed, it can no longer be pulled. Instead, you just need to close it to the point where you can zip it quickly.

Try to lubricate the teeth Sometimes, the teeth are too rough to close, if so, apply a pencil to all sides of the teeth. Try pulling the zipper back and forth to see if it closes. If that doesn't work, try applying glass cleaner, wax, soap or lipstick.

Change a strong lubricant If the end of the pencil is not good, change to a strong lubricant. Other lubricants are soap, candle wax, glass cleaner and lip balm. Apply it to the zipper in the same way.

Then test it. Note that you may have to repeat it several times to make an impact.

1. Some zippers are not easy to pull or do not fit, you can check whether the zipper teeth of the lower zipper have fallen off, if the zipper teeth have fallen off, then you have to replace a new zipper.

2. The zipper may not be smooth enough, at this time we can use paper to cushion the zipper, dip a little sesame oil on the zipper, or draw pencil and soap on the zipper a few times to increase the lubrication, and then gently pull a few times, you will find that the zipper is much smoother.

3. The zipper is not easy to pull, first see if the zipper of the clothes is not flat, the zipper will not be able to pull over if there is a bend and unevenness, you can straighten the zipper of the clothes and then pull it, it will be easy to pull it up.

4. If the zipper is not closed, and the zipper is still open, you can take a sharp-nosed vise and gently clamp the zipper head on both sides, or you can knock it twice to increase the bite force of the zipper.

Aging zipper pulls and plastic zippers should be reduced to avoid breakage.

1.Don't pull too hard, too hard, and don't pull hard.

2.Do not pull until it is stretched too tightly so as not to stretch.

3.Apply a layer of wax to the zipper often and pull it back and forth to make sure it slips smoothly.

4.When washing clothes, be sure to close the zipper, otherwise the zipper will be twisted by the washing machine and dryer, resulting in the zipper serration teeth falling off and being damaged.

5.Check the zipper frequently, pay attention to whether there is "tooth loss", "skew" and other phenomena, if it is loose, you can use a small hammer on the zipper head a few times, so that the upper and lower sawtooth bite a little tighter, the sawtooth will not often fall off.

You can't fix this, can you? It is advisable to take it to a tailor near you to get it, or to ask the store where you bought the dress for an after-sales service. It is recommended to find down for secondary filling when making up.