How to solve the zipper if it does not bite, and what to do if the zipper is not tight?

Hello, I believe that each of us has a broken zipper, sometimes our clothes are good, and the zipper falls apart inexplicably. At this time, I didn't dare to put something in my pocket for fear of losing it. As shown in the figure, the zipper function is invalid, and the zipper cannot be closed.

First of all, check whether our zippers are missing or broken. If it's because of missing or broken teeth, it's unlikely that we'll fix it. But if not, we'll have to check our zipper, and that's when we'll see the problem.

Due to our non-standard operation, the gap between the upper and lower plates of the zipper is too large.

In other words, when the zipper slides on the zipper, the pressure on the zipper is reduced, and it does not have the effect of tightening the zipper. When we open the zipper, we can find out which side of the zipper has become larger, and we only need to prescribe the right medicine. Here's a simple step-by-step, let's take a look.

We only need to use pliers, according to the method shown in the figure, to shrink and press the gap between the upper and lower plates of the zipper, and that's it. It's very simple, and if you don't have tools, you can even use your own teeth to solve the problem quickly. One action, one go, one step!

Very effective.

The oil of the sewing machine is relatively transparent and clean, and it can be dripped on the zipper, but don't do so much, otherwise it will stay. If you don't have sewing oil, you can make do with peanut oil and vegetable oil, and it is not recommended that the oil is dirty.

3. When the zipper is not smooth, if there is someone at home who knows how to tinker, you can sew a wind and discipline buckle hook with a needle and thread at the part below the zipper, so that you can hook the square hole at the top of the zipper, so that the zipper activity is smoother, and it is also relatively firm, and it is not easy to derail.

4. The zipper is not good, you can see if there is a problem with the head of the zipper, you can try to replace a good head, go to the outside clothing store, and change it on the street.

5. If the zipper head is good, then the entire zipper can only be replaced, so that it can be completely solved. When replacing, you need to pay attention to the integrity and quality of the zipper head and the teeth of the zipper.

Finally, let's take a look at the effect. As you can see, the zipper, with the help of the zipper, is back to work. What do you think? Isn't that practical? Under! Hope it helps,

I don't know if you have encountered the situation that the zipper does not close your teeth, so today I will teach you the solution to the zipper not biting.

Sometimes, the teeth don't fit because they're too rough, and if that's the case. Apply the pencil to all sides of the tooth. Try pulling the zipper back and forth to see if it closes.

If that doesn't work, try applying glass cleaner, wax, soap or lipstick.

There are pliers. Use pliers to straighten out the bent teeth. Double-check the teeth to see which ones are different or protruding, and carefully pull them back with pliers. Use small needle-nose pliers to clamp the teeth one by one. Otherwise, it is very likely that other normal teeth will be accidentally damaged.

The zipper sometimes opens and does not close properly. Use pliers to close the top and bottom of the zipper so it can grab the other teeth. Be careful not to close the zipper so hard that it looks like it's sinking.

If the zipper is fully closed, it can no longer be pulled. Instead, you just need to close it to the point where you can zip it quickly.

Sometimes, after the clothes have been worn for a while, the teeth will become less neat. If this happens, you'll need to remove the metal panels at the bottom and realign them. Use needle-nose pliers to open the metal splice so that it can be removed from the zipper.

Pull the zipper to the bottom of the zipper and close the teeth on the zipper with your hands. Gently pull the zipper through the teeth so that they are in place. Don't just pull the zipper off. If you do, it's going to be hard to put it back on.

We sew the tail together with a needle and thread. Stitch at least six stitches instead of metal clashes. Be sure to sew it strongly, otherwise the zipper will come off.

The zipper is always not tight, and the reason for the opening from the middle is that the zipper opening is too large (too much force during use will cause the opening to become larger), just clamp twice with spike pliers to solve, the specific operation method is as follows:

1. Use a pair of pliers to gently clamp the side of the zipper to make it slightly smaller.

Second, don't forget to clip it on the other side, and pay attention to the size of the opening of the Song clan on both sides to be consistent.

3. After the zipper opening becomes smaller, you need to pull the zipper back to the bottom of the zipper.

Fourth, as shown in the figure below, after the zipper opening becomes smaller, the zipper can be closed normally.

The solution to the zipper not occlusing is as follows:Tools Material: Glass cleaner, needle-nose pliers, 1. Try to apply it with glass cleaner.

2. Carefully pull it back with pliers and clamp the teeth one by one with small needle-nose pliers.

3. The zipper will sometimes be opened, and the zipper cannot be closed normally, so use pliers to close the top and bottom of the zipper together, so that it can catch the teeth of other friends.

4. Remove the metal splices from the bottom, realign them, and open the metal splices with needle-nose pliers so that they can be removed from the zipper.

5. Pull the zipper to the bottom of the zipper, put the teeth on the zipper together with your hands, gently pull the zipper through the teeth, and sew the tail with a needle and thread.

1.If the opening and closing is not smooth, if the zipper puller is pulled hard, the bite failure of the tooth element will occur. At this point, paraffin wax or lubricating spray is applied to the surface and inside of the tooth.

Then move the slider a few times until it comes loose. 2.The zipper is placed on a bag with too many things, if the zipper is used for closure.

If the zipper is stressed too much, the teeth will separate from the belt. This is serious in the zipper failure Xinchang. Pull the left and right teeth closer together.

In this way, the chain head is slippery and can be easily worn to close the zipper after Hu Qing. 3.Turn the zipper on and off, and sometimes the zipper head bites the line segment or cloth.

As a result, the zipper puller will not be able to pull. In this case, if you force the zipper puller, it will bite deeper and deeper, and the zipper puller must be upside down while untying the cloth strip. When fully biting, do not pull the puller too hard, slowly pull the puller back.

Please do not leave any hidden zippers when sewing. 4.It is not easy to use zippers after wearing clothes for a long time, because the zipper of the zipper is loose.

At this point, you can use pliers to grip the zipper.

The solution for the zipper not to bite varies from case to case. Here are a few ways you might fix the problem:1

Make sure the zipper heads are positioned correctly, i.e. both zipper heads should be on the same side. 2.Check that all the teeth are normal, and if the tips are deformed or sharp, you can use pliers to gently straighten them.

If the tip of the tooth is too long, it can be cut off with an orange cutter or ground off with a fine file. 3.If there is dirt or dust on the zipper opening of the zipper bag or clothing bag, you can clean it with a soft-bristled brush, or wash it with a toothbrush dampened with soapy water, and then wipe it clean with a damp cloth.

4.Determine if the zipper head stretch length is appropriate. If the length is insufficient, the handle can be removed and modified.

Otherwise, if the length is too long, you can poke the two zipper heads so that they shrink slightly.