What to do if the zipper doesn t pull What s the trick

The details are as follows:

1. You can pull the tail of the zipper, straighten the zipper, and then repeatedly pull it from the bottom to the top to check whether it is smooth.

2. The simplest and most effective way is to coat the surface of the zipper with a layer of wax, and use the lubrication effect of wax to achieve a smooth effect. After wiping the surface of the zipper back and forth with a candle, and then pulling it several times from the bottom to the top, the zipper will be smooth.

Uses of zippers:

1. Metal zippers are mostly used in jeans.

on coats and backpacks.

2. Waterproof zippers are used for cold-proof clothing, ski suits, down jackets, navigation suits, diving suits, tents, vehicle and boat covers, raincoats, motorcycle raincoats, waterproof shoes, fire suits, bags, and jackets.

Waterproof related series products such as fishing suits.

3. Fireproof zippers are generally used for fire-fighting clothing, kitchen work clothes and other clothing that requires fireproof requirements, and play a role in fireproofing.

Fireproof zippers are composed of chain teeth, sliders, limit codes (front and back) or locks, etc. Among them, the chain teeth are the most critical key part, which directly determines the side pull strength of the zipper. Generally, the zipper has two chain belts, and each chain belt has a row of chain teeth, and the two rows of chain teeth are staggered with each other.

The slider clamps the chain teeth on both sides, and with the help of the pull loop, the chain teeth on both sides can be meshed or disengaged from each other.

You can put some soap and other lubricants to reduce friction and let the zipper pass better, or you can bite the zipper with your teeth, some of which are loose because of a long time, so it is best to change a zipper.

If the zipper doesn't move, you can wipe it back and forth with wax on the zipper a few times.

1. Hold the tail of the zipper, straighten the zipper, and pull it up repeatedly to check whether it is smooth. If it's not smooth, it may be stuck on something else, and you just need to clear the obstacle.

2. Apply a layer of wax to the surface of the zipper, and use the lubrication effect of the wax to achieve a smooth effect. After wiping the surface of the zipper back and forth with a candle, it is sufficient to pull it several times from the bottom to the top.

3. Lubricating oil can be used, and the drip on the position of the pull ring can also achieve the purpose of smoothness.

Related Notes:

When using it at ordinary times, it is necessary to pay attention to whether there are "broken belly", "tooth loss", crooked and other problems on the zipper, and repair these problems in time, and do not pull hard. If the zipper is loose and the teeth are missing, you can use a small hammer to gently knock a few times on the zipper head to make the upper and lower chain teeth bite tighter, and the teeth will not be removed again.

Aluminum alloy zippers are more susceptible to corrosion, so they should be kept dry and not damp to prevent the aluminum teeth from generating white oxides, which will cause the zipper to rust over time, affecting the use, and at the same time, it should be noted that it is not in contact with alkaline and acidic substances.

When storing, it is necessary to ensure a certain degree of ventilation, do not store it in a sealed environment, and do not store it in a humid environment, and use moisture-proof paper or dehumidifier if necessary. If the zipper is damp, it will be astringent when pulled up; At this time, the zipper is dried first, and then some wax is applied to the teeth of the zipper, and then roasted with fire, so that it is very lubricating to use.

The zipper of the clothes can't be pulled, and there are a few tricks to master it, so that it is smooth and not annoying in minutes.

What should I do if the zipper of my clothes won't be pulled? Teach you a trick to easily get the zipper smooth.

What should I do if the zipper doesn't pull up? Learn a trick from the old tailor, the zipper will immediately become smooth, save time and effort, don't worry if the zipper can't be pulled, just a little trick, immediately smooth, the method is fantastic.

Take a crayon and apply it back and forth on the two rows of pull teeth, the next time you pull it up, it will be very slippery, and candles will work too. Using a cotton swab dipped in petroleum jelly and applying it back and forth over the tooth puller can have the same effect. If the zipper becomes difficult to pull after washing, you can apply paraffin wax and let the slider slider slide up and down two to three times, so that it will be easier to pull.

Because the zipper may not be able to pull it may be that there is dust or oxidation between the slider and the chain teeth, so the friction between the slider and the chain teeth increases, and the friction between the slider and the chain teeth can be reduced by applying wax to the zipper a few times. In the absence of wax, dry soap, soap can be used instead of wax, or a few drops of sewing machine oil, peanut oil, rapeseed oil. However, it is not recommended to use oil for nylon zippers and plastic zippers, because plastic and nylon will deteriorate after a long time of oil.

Apply some wax to help lubricate.

Apply some soap to it.

Straighten the zipper and gently pull it with your hand.

The zipper can't be bitten because the zipper head bayonet has become larger, and the repair method is given below:

Material required: Needle-nose pliers.

1. Look at the figure below, when the zipper is not tight, it is generally the side of the narrow zipper head that the bayonet has become larger.

2. At this time, take out a pair of needle-nose pliers and gently clamp it on the side of the narrow mouth (pay attention to the strength, not too much).

3. Then clamp the other side of the narrow mouth as well.

Fourth, finally clamp the side of the narrow mouth of the zipper pull.

5. After the narrow mouth is clamped and repaired, re-tighten the zipper, and the zipper can be tightened on both sides.

What should I do if the zipper of my clothes can't be closed? Teach you this trick today, and easily help you pull up!

Tools required: taper pliers, scissors, needle, thread.

Steps: 1. We pull the zipper to the very bottom, make a comparison with the side of the zipper, and find the chain teeth parallel to the zipper head.

2. We use scissors to cut off this chain tooth.

3. Next, there is a gap after cutting.

4. We put the zipper through this notch.

5. Pull it up and get it back on track.

6. Sew the mouth of the chain teeth cut with a needle and thread, and sew it a few more times to make it firmer, so that when you pull the zipper down again, you don't have to worry about the zipper head running out.

7. After the repair is completed, use pliers to clamp the two ends of the zipper slightly.

8. The repair is complete.

1.You can pull the tail of the zipper, straighten the zipper, and then pull it back from the bottom to the top, check whether it is smooth, if it is not smooth, many times it is because the zipper is stuck with other things, so it is not smooth, just remove the obstacle judgment and block, you can return to normal. 2.

The simplest and most effective way is to coat the surface of the zipper with a layer of wax, and use the lubrication effect of the wax to achieve a smooth effect.

In addition to wax, lubricating oil can also be used, to choose a more transparent, clean kind, after a few drops on the position of the zipper tab, repeated pulling, can also achieve the purpose of smoothness.

If you can't pull it down, you can apply some cavity attack on the top of the Wu Bureau and let the soap liquid moisten it, if it doesn't work, you can only destroy the zipper and then go to the small shop outside to sew a zipper for the most yuan.

Preparation materials Tools: Songdong early forks, zipper buckles, clothes.

1. Place the zipper buckle on top of the fork and place it in the middle of the fork.

2. Fix the zipper buckle in the middle of the fork, and pay attention to the front and back of the fixation.

3. Bring the clothes that have dropped the zipper, and insert the two ends of the trembling finch into the zipper buckle.

4. After putting it on, pull it down, pay attention to the reverse of the clothes here, pull the inner one, and turn the clothes back after pulling.

5. Finally, it was restored.