The electric heater will automatically stop, and it will automatically turn on after a while, what s

The electric heater has a temperature controller, which will no longer heat up when the set temperature is reached, and will automatically turn on when the temperature is lower than the set temperature.

Main classification: electric heaters include convection, energy storage and microcirculation.

and other three forms: convection electric heater uses the electric heating element as the heating element, and heats through the heating and convection of air, which is small in size, quick to start, fast in heating, accurate in control, and easy to install and maintain; The energy storage electric heater uses energy storage materials, which can be used to store energy at night when the electricity price is low.

It releases heat during the day, but it is larger and less comfortable for heating; Microcirculation electric heater is a new type of electric heater that uses the heat conduction medium to be filled in the radiator and the circulation of the medium in the radiator to increase the indoor temperature. Among these three types of electric heaters, convection electric heaters are the most commonly used, and almost all of the civil electric heaters we usually see in home appliance stores are convection.

The popularity of electric heaters stems from its many advantages: since electricity is a clean energy source.

Therefore, the convection electric heater has no emission, no pollution, no noise, and outstanding environmental protection; It is easy to use, it heats up when it is powered on, and stops when it is turned off, and even in the north where there is central heating, electric heaters can also assist heating. Some smart models can also be timed and temperature-fixed, and can be freely moved and adjusted in each room.

It is energy-efficient and energy-efficient, with an electric energy conversion rate.

At more than 99%, the heat energy utilization rate is as high as 100%, which can save energy to the greatest extent; Its purchase and operation costs are relatively low, metered charges, and there is no problem of difficult central heating charges.

It is estimated that there is a temperature controller in the electric heater, and when the set temperature is reached, the electric heater will no longer be heated, and when the temperature is lower than the set temperature, it will automatically turn on.

I'm also experiencing this issue, how can I deal with it?

This is not the case with other people's families.

The electric heater will automatically stop, and it will automatically turn on after a while, what's going on

Hello, the old automatic heating stop for a while and automatically turn on is because the temperature controller has a problem or malfunction. It is when the set temperature is reached, the electric heater will be turned on and will no longer be heated, and when the temperature of the key belt is lower than the set temperature, it will automatically turn on.

Can an electric heater give me warmth in the cold winter, especially in places where there is no heating, if there is an electric heater, it will be more comfortable in winter. Nowadays, the functions of electric heaters are many and comprehensive, and they can only be used, there will be anti-dumping, constant temperature control functions, in order to reduce unnecessary losses, so what should I do if the electric heater is always automatically powered off?

1. This situation is because of the automatic constant temperature function of the electric heater, and now many electric heaters will have the function of automatic constant temperature or automatic power off to prevent accidents. The electric heater with thermostatic function has a temperature controller, and when the set temperature is reached, the electric heater will shut down the power by itself, which can reduce unnecessary waste of electrical energy, and will start heating again when the temperature drops.

2. The power supply of the electric heater must be qualified with grounding wire.

Three-pin socket, otherwise there is a risk of leakage. The electric heater has high power, do not use it with high-power electrical appliances and welding machines.

Percussion drills and other use at the same time, otherwise it is easy to damage the electric heater.

3. In addition, the socket should not be located directly above the electric heater to prevent the heat from rising and burning the power supply. If no one is in the room, make sure to unplug the electric heater.

After installing a circulating pump in a household floor heater, if the power supply is cut off, the circulating pump will not be able to circulate on its own. Because the normal operation of the circulating pump needs to be connected to the power supply. The water in the pipes does not circulate after a power outage, and the furnace does not boil after a power outage because the heating temperature of the boiler is constant.

The household heating circulation pump has made breakthroughs in the characteristics matching, reliability, service life, noise and other aspects of the system, and has created good conditions for the use of forced circulation in the general market. A circulating liquid pump for transporting reaction, absorption, separation, and regeneration of absorption liquid in the device. Generally, a single-stage centrifugal pump is used.

The flow rate of the circulating pump is medium-sized, and the flow rate of the pump changes relatively little under stable working conditions. It has a small and low head and is only used to overcome the pressure drop in the circulatory system. A low-head pump can be used to ballast the cavity.

Abstract dear, hello, I am happy to answer your questions, 1. It may be that the connector of the electric heating power cord is broken and the plug is damaged. 2. It may be caused by damage to the power switch or dirty contact ablation. 3. It may be caused by the overheating protection of the electric heater or the tripping of the power supply.

4. It may be caused by loose internal plug-ins of electric heaters or damage to thermostats and heating elements. 5. It may be a quality problem of the electric heater itself.

The electric heater was turned on for a while, and it didn't start for half an hour.

Dear, hello, I am happy to answer your questions, 1. It may be that the electric heating power cord connector is broken and the plug is damaged. 2. It may be caused by damage to the power switch or dirty contact ablation. 3. It may be caused by the overheating protection of the electric heater or the tripping of the power supply.

4. It may be caused by loose internal plug-ins of electric heaters or damage to thermostats and heating elements. 5. It may be a quality problem of the electric heater itself.

If the electric heater is not heated in use, you can check the manual, the corresponding manual self-inspection, the common fault is the switch switch or damage and other options, if the internal components are damaged, it is not recommended to disassemble and repair without authorization, find professionals or manufacturers after-sales treatment, to avoid causing greater damage.