If you want to use tamarix as a bonsai, can tamarix be cut into life, and how to cut it?

I want to use tamarix. To make bonsai, tamarix can be cut into life, and the appropriate method should be chosen. When the strange willow is propagated by cuttings, it is necessary to choose land with less salt content.

The willow is a plant that is cultivated from tree stumps, and it is necessary to learn the traditional method of cuttings. When cuttings, the strength should be smaller, otherwise the survival rate will be very low. When the strange willow is regarded as a bonsai, it reproduces relatively quickly, and it will be used better.

Some people feel that they have no technology, and they can choose to learn if they are not good at cuttings. <>

The strange willow must be pruned and pruned from time to time, and the requirements for the soil are also very high. Strange willow can also be planted in times of drought, and the survival rate is relatively stable. I want to cultivate strange willows into weeping willows.

The shape can be shaped to a certain extent at this time. The branches cut from the strange willow must be larger than 20 cm, otherwise the cuttings will not survive. It is necessary to save the resources we already have, and then effectively cultivate the ways to obtain good ones.

This kind of strange willow has very low requirements and can grow very quickly. To choose a bonsai, you need to choose some excellent tree species, and the strange willow is such a thing. Don't dig too much for the strange willow, be sure to see if it can be wild.

When digging the strange willow, you should also take into account some problems that you can't easily dig by yourself. Some people will do some experiments with the strange willow, and you can imagine how high the survival rate of the strange willow is. When cuttings, it will be very simple to use strange willows, and you can survive with water.

As a bonsai, it must have a good survival rate, and only in this way can it make the strange willow better and better. <>

In general, it is necessary to make appropriate adjustments according to different shapes and different sandy soils, and some people will also disinfect the earthworks. The strange willow is very adaptable, and can survive quickly in some wind-blown and sandy areas. Cutting the Strange Willow Blade in the desert will not hurt, and it can also be blocked.

Such potted willows do not need to be treated with any medicine at home, but only need to be cared for in time.

Yes, when planting, you must choose an environment suitable for growth, he likes to be moist, salt and alkali tolerant, a small amount of chemical fertilizer many times, choose a strange willow, cut off his original shape, and then leave a strong bud on the main trunk, and when it grows to semi-lignification, use iron wire to cause, be careful not to pluck the top, take it off in about 20 days, and cut it short in winter.

When cuttings, be sure to pay attention to the details and never hurt the roots of the plant. And also pay attention to safety, don't let yourself get hurt, and be sure to observe the growth of the plant when cuttings, if there are small insects, then you must spray insecticides in time, but I think the most important point is that when cuttings, you must choose a good angle, do not affect the growth of plants.

Yes, to choose autumn cuttings, the distance between the plants should be about 30 cm, the row spacing should be about meters, 20 cm should be cut from the original plant, and then the small head is inserted into the soil with the small head facing outward, and then the soil is compacted with a hammer.

(1) Cuttings and seedlings collection and preparation: Seed strips are collected in the dormant period. You can choose 1 2-year-old branches to come and fall in autumn, and cut ears in spring after being stored in open sand.

First remove the part where the tip tissue is not full and the degree of lignification is slightly worse, select the branches with a thickness of more than centimeters, cut the cuttings about 15 cm long, the upper incision is 1 cm away from the first winter bud, the incision should be smooth, and the lower incision is about 1 cm away from the bottom bud, which can be cut into a horseear shape. Then divide the coarse subdivisions into a bundle of 50 or 100 plants, and place them in the shade with wet sand for later use. Willow cuttings are very easy to survive and do not need to be treated.

However, if the seed strip collection time is long and the cuttings have water loss, they can be soaked in water for 1 2 days before cuttings (preferably running water), and then cuttings, and the survival rate will be improved. Cuttings: Ridges are common.

Single-line or double-line interpolation is acceptable. Single-row cuttings spacing 15 to 20 cm; The row spacing of double row cuttings is 20 cm, and the plant spacing is 10 to 20 cm. When cuttings, it is advisable to take cuttings according to the grading of cuttings.

It is better to cut vertically with the small head facing up. The top of the spike is level with the ground, and it is solid after insertion. Where conditions permit, irrigation can be carried out immediately, so that the soil can be compacted and closely connected with cuttings, which is conducive to survival.

Key points of tending management: The soil should be kept moist during the seedling stage, and water can be released on the ridge trail for irrigation during drought. At the seedling stage, it is necessary to timely top dressing and weeding, and pay attention to removing excess sprouts, and select a strong branch to cultivate into the main stem.

In order to ensure the growth of the main stem, in addition to retaining three-fifths of the branches, the axillary buds of the lower seedling stem should be erased in stages, and the buds should be stopped in early and mid-August.

In the spring, find the willow branches with knots, about 15 to 20 cm, cut the cross-section, cut off the apical buds, bury them obliquely in the moist soil, cut off some of the leaves, and put a transparent plastic bag to keep them warm.

When the willow branches are cut back, if they are planted, they must be planted within 2 hours.

1. Cut the willow branch into short sections, put it in a cup with cold water, soak it for 24 hours, and see that the water turns pale yellow, indicating that the auxin and salicylic acid in the willow branch have been integrated into the water.

2. Put the branches ready for cuttings into a water cup and soak them, put them in a cool place for two days, you can find that the branches have begun to take root, about five days, the roots have grown and can be planted in potted soil.

3. When the branches are planted in the soil, the liquid in the water cup can also be poured into the pot to further promote the growth of the branches in the soil.

The rooting ability of willow is very strong, willow is rich in growth hormone, and under the promotion of auxin, willow branches are easy to germinate; In addition, willow branches are also rich in salicylic acid, which has the effect of sterilization and antibacterial, so it is very effective to use the water soaked in willow branches to promote the rooting of flower branches.

The first and second floors are copied from a web page to describe most of the practices that belong to the season (belonging to the practice at the beginning of autumn, it is now winter, and some practices are no longer suitable), please do not copy the practice that the season has been out of date. There is a saying in China since ancient times: "If you have the intention to plant flowers and flowers do not bloom, you have no intention to plant willows and willows into the shade", and it is very easy to raise seedlings with willow cuttings with strong germination force (including poplars, mulberries, yueji, and holly.

And so on, in the current season before winter turns to spring, as long as the seedlings are raised with willow cuttings that have not yet sprouted, the survival rate is also very high. .The simple way to do this season is:

Cut the sturdy willow branches (in fact, the diameter range of centimeters is acceptable), cut them into 10-25 cm length at a 45 degree oblique angle, and use them as cuttings for later use. Take a number of river sand that has been washed out of the soil (screen and remove large stones), and lay it 10-15 cm thick and wide meters in the leeward and sunny place as a seedbed. Insert the truncated willow branches into the seedbed at a distance of 5 cm from each other, and water the river water with high oxygen content or the well water or tap water that has been left standing.

Bow scaffolding is inserted along the seedbed with branches or bamboo strips, covered with plastic film, for heat preservation, moisturizing, root promotion and activation. Every 1-2 days, open the film to change the air of the seedbed, and check the humidity of the sand bed, if it is dry, it should be watered in time to maintain the humidity. In this season, the cultivation willow branches will germinate, and when two or three young leaves grow and germinate roots (need to check whether they have taken root), they will rise in the warm spring and transplant them to the seedling field with fertile and loose soil (the roots and leaves will be frozen at low temperature, and the seedlings must be carefully planted quickly).

When transplanting into the field, it is advisable to be in the spring warm season, according to the size of the predetermined planting seedlings to determine the plant spacing, planting in the field for a week after watering the farmer's organic growth and thin fertilizer, and then according to the conventional soil, fertilizer, water, pruning management, after 1-3 years of cultivation can get the expected size of the willow planting seedlings.

Tamarix germinates strongly, grows fast, grows vigorously in spring and summer, and is pruned once a week to maintain the shape of the tree. For the new shoots that germinate on the trunk, all those that are not needed for modeling should be removed in time to avoid consuming nutrients. In order to improve the ornamental nature of Tamarix, you can take advantage of its strong germination and destruction characteristics, remove all the leaves in the vigorous growth period, and then put them in a sunny place, strengthen fertilizer and water management, spray water on the branches once in the morning and evening, and germinate new shoots in 5 to 6 days, and the leaves are plump as ever, tender and green and lovely.