How to get a leaky toilet and how to do a leaky toilet

Find out the cause of the toilet leak. "The right medicine". Check if there is a leak in the toilet flush, a leak caused by a blockage under the toilet, a permanent loosening of the toilet, a gap in the toilet that is not properly installed, or an uneven floor, etc.

If the edge of the toilet is leaking, then first scrape the glue on the edge, tilt the toilet at a certain angle, see if the rubber ring of the toilet connection test is damaged, replace it if it is damaged, and then let the toilet drain face the lower pipe, and then use new glue to apply the edge of the toilet bowl to the bottom edge.

If the bottom of the toilet is a cement slab, you need to open the cement slab first, then get the cement inside out first, and then re-smear the black cement inside. Then the outermost layer is plastered with white cement.

If the toilet is blocked because there is a foreign object in the toilet, you must disassemble the toilet bowl first and then glue it to fix it. Similarly, due to the long use of time, the leakage caused by the loosening of the toilet bowl also needs to be replaced with spare parts and glue.

The toilet is repaired, do not use it for a short time, and do not flush it. It has been used for a long time and leaks, so you need to replace the toilet sealant.

There are several cases of toilet leakage, the toilet is leaking underneath, this is the interface is not interfaced, and there is a very good way to solve the problem by changing the toilet mat, which is to find a larger drink barrel and cut off the taper part at both ends, cut the height and press it, and it will not leak without fixing the glue. Second, the flush valve leaks, the water level is too high to reduce the water level, the seal is not tight, it may be used for a long time, there is a foreign body on the sealing gasket, you can remove it for cleaning, try it. If you can't do that, you need to replace the flush valve.

I hope my reply will be helpful to you.

1. Water tank leakage investigation method:

1. The rubber ball valve is broken, and a rubber ball valve with a matching model needs to be replaced.

2. The rubber gasket of the drain port is aging, and after long-term use, the rubber gasket will become thinner and thinner, and finally completely aged. Once the rubber gasket is aging and the tank will become less sealed, replace it with a new rubber gasket.

3. The link between the floating ball and the water inlet switch is loose, open the toilet tank, you can see a small ball floating on the water surface, and the small ball is connected to the water inlet with a water pipe. Check that the connection between the two is tight, and if it is loose, the connection needs to be tightened.

Second, the edge of the base leakage investigation method:

Scrape off the glass glue of the base first, then lift the toilet to check whether the sealing ring at the sewage outlet is damaged, replace the new sealing ring if it is damaged, and then apply glass glue at the junction of the toilet and the ground.

Align the toilet drain and sewer pipe, and finally seal the toilet base with glass glue.

When you are in life, there will always be such and such problems in the toilet, how to deal with the leakage of the toilet, and what is the solution? A lot of users don't understand. So what to do if the toilet leaks?

1. How to deal with a leaky toilet - the design of the box is not good.

If some of the devices in the tank are to work normally, it should be considered clearly when designing, if it is because of this reason that the toilet leaks, then it is necessary to see if it can be repaired, or change the water tank.

Second, how to deal with a leaky toilet - business.

If you buy the toilet yourself, the dealer or manufacturer is responsible for the installation, due to quality problems or improper installation and leakage, find the dealer or manufacturer to replace it in time, therefore, leave all kinds of furniture manufacturers and dealers when home decoration.

3. How to deal with the leakage of the toilet - the sealing cover of the drain valve is not tight.

This may be caused by the material of the sealing bonnet, which will not be the case when it is used for a long time, but it will slowly appear after a long time, so that it will be replaced with a good material sealing cover, and the production should be excellent.

Fourth, how to deal with the leakage of the toilet - the float in the box is not buoyant enough.

Nowadays, many toilet tanks are small, so that although water can be saved, the buoyancy of the float is not enough, so that the float can not turn off the inlet valve after being flooded, so it leaks. In this case, the float will need to be changed, but before changing, calculate the pressure required by the float, and then choose what kind of float according to this.

5. How to deal with a leaky toilet - find a developer.

If the toilet leaks after the handover of the new house or the handover of the house, please ask the developer in time to solve the problem. For the developer has withdrawn from the real estate, can not find the developer, please find the relevant property company responsible for the property management of the property to ask for a solution, if the Moqin property company has not yet settled, then only find a way to solve it.

6. How to deal with a leaky toilet - the inlet valve does not have a filter.

If there are too many impurities in the water, it will cause blockage to the sealing ring in the inlet valve, so that the inlet valve cannot be closed when it is working, as long as the sealing ring is cleaned and the filter screen is added.

7. How to deal with toilet leakage - the connection of the non-integrated drain valve is not tight.

This situation is inevitable, there are many joints, and this situation will occur over time, and the greater the water pressure, the more serious the water leakage. What to do if this kind of toilet leakage, if it is not replaced with an integrated drain valve, then it is necessary to transform the various joints of the drain and water resistant water valve to make a structural form of threaded and water-resistant binder assembly, so as to prevent the toilet from leaking.