Why is the wall of the bedroom downstairs soaked when the toilet is flushed?

As soon as you get out of the toilet, the wall of the bedroom downstairs is soaked in water, indicating that you are in the water.

The pipe was next to the downstairs bedroom wall, and the pipe was broken. When flushing the toilet, most of the water runs down the pipe, and a small amount of water seeps down the crack to the wall. So you.

You need to find a professional plumbing maintenance personnel. Follow the wet trail to find the crack in the toilet pipe and repair it. If the damage is too large to repair, then the entire pipe will have to be replaced.

Hope mine is helpful to you.

The drain pipe inside the toilet cracked, leaking water into the wall and seeping into the corner of the bedroom downstairs that was connected to the toilet floor.

Just ask a repairman to open the toilet and fix it.

This should be a leak in the sewer pipe, the sewer pipe and the bedroom are close to each other, and the leakage will penetrate into the wall of the bedroom, making the wall damp, and the water will soak in if there is too much water.

It should be that the interface between the toilet and the sewer pipe is not tight, causing the water to seep into the roof plate, along the pipeline in the board or the gap between the waterproof layer and the board to the wall, and seep out on the wall downstairs.

It means that the toilet is not waterproof, or the waterproof is not done well, and the sewer pipe is not well sealed, so the downstairs is flooded.

This should be the water pipe of the toilet that may be leaking, so he will get water, it should be, he opened it and repaired it.

As soon as I flushed the toilet, the downstairs bedroom wall was soaked with water, saying that the drain pipe of the toilet burst, and as soon as there was water, it seeped out, just seeping into the bedroom wall.

When flushing the toilet, the downstairs wall is mostly soaked in water related to the underground pipe of the toilet, so it is recommended to check the pipe.

It may be that the sewer pipe is cracked with dew, so when you flush the toilet, the wall of the bedroom downstairs will be soaked in water.

It should be a leak in the pipe, so check it out.

The waterproofing around the toilet floor drain is not done well, resulting in water seepage to the wall}

The water tank outlet is leaking, and the next time this problem occurs, you can consider sealing it with glass glue.

It is estimated that the sewer pipe in the wall is not broken, so the water will leach out.

This is a leaking sewer pipe, you need to find a professional plumber to repair it, it is best not to use the toilet before it is repaired.

Summary. Toilet leakage treatment method: 1. The internal parts of the water tank are aging, if the internal parts of the water tank are aging, there is no other choice, but you need to replace the parts quickly.

2. The connection between the toilet and the sewer pipe is leaking, if the connection between the toilet and the sewer pipe is leaking, the toilet needs to be reinstalled and the rubber is resealed. Symptomatic cracks in the toilet itself: If the toilet has cracks and leaks, it is better to replace it with a new toilet.

3. For the problem of the water inlet group and the water outlet group of the symptomatic toilet, you need to open the water tank and see that the water tank is overflowing, and the water flows out of a water pipe indicates that the water inlet group is broken, and if there is a sound of water inflow, the water outlet group is broken. 4. For symptomatic water tank leakage, you can take down the drain machine core to clean up the scale, if it still doesn't work, you need to change the toilet. 5. The bottom of the toilet is leaking, which may be due to the fact that the connecting sealing flange between the toilet outlet and the ground drain is not in place.

At this time, you need to disassemble the toilet, buy a new flange and reinstall it, and then fix the toilet with glass glue. The glass glue only plays the role of fixing the toilet bowl on the ground without moving the position, and does not play the role of draining water when the toilet drains. If the main sewer pipe drains smoothly, it will not leak out even if the flange is slightly misaligned.

Hello dear. Does this mean that your toilet is leaking?

The toilet leak is water-resistant, mainly considering the following two situations1The flange ring between the toilet bowl and the pipe is damaged, and there is a leak 2There is a leak in the sewer pipe, this situation of your home is wide, I personally think that there is a high probability that there is a problem with the flange ring connecting the toilet and the pipe, and today the old man poured a few buckets of water into the toilet, maybe the water is more urgent, and then there is a leak downstairs.

Toilet leakage treatment method: 1. The internal parts of the water tank are aging, if the internal parts of the water tank are aging, there is no other choice, but you need to replace the parts quickly. 2. The connection between the toilet and the sewer pipe is leaking, if the connection between the toilet and the sewer pipe is leaking, the toilet needs to be reinstalled and the rubber is resealed.

Symptomatic toilet itself is cracked: if the toilet cracks cause water leakage, it is better to replace it with a new toilet. 3. For the problem of the water inlet group and the water outlet group of the symptomatic toilet, you need to open the water tank and see that the water tank is overflowing, and the water flows out of a water pipe indicates that the water inlet group is broken, and if there is a sound of water inflow, the water outlet group is broken.

4. For symptomatic water tank leakage, you can take down the drain machine core to clean up the scale, if it still doesn't work, you need to change the toilet. 5. The bottom of the toilet is leaking, which may be due to the fact that the connecting sealing flange between the toilet outlet and the ground sewer outlet is not in place. At this time, you need to disassemble the toilet, buy a new flange and reinstall it, and then fix the toilet with glass glue.

The glass glue only plays the role of fixing the toilet bowl on the ground without moving the position, and does not play the role of draining water when the toilet drains. If the main sewer pipe drains smoothly, it will not leak out even if the flange is slightly misaligned.

If there is a water leak downstairs, it may be damaged by the waterproof.

Can you go downstairs and see if it has spread from the location of the side toilet?

I didn't leak out of the downstairs when I used the toilet before, and the downstairs leaked at the toilet position.

Is the toilet connected to the drain pipe straight?

Hello dear! According to your problem description: There are many possible causes of water leakage, according to your description, the toilet flushing downstairs will leak, the possible causes are:

1.Blocked drains. There may be a blockage between the toilet and the drain pipe downstairs, and the water cannot flow smoothly when flushing, thus causing overflow and leakage.

In this case, you can try using a chemical destructor for unclogging or using a drain cleaner for physical unclogging. 2.Drainage pipes burst.

If the house is old, the drain pipe may have cracked or cracked, and the water will seep out of the cracked area and lead to the surrounding soil and downstairs when flushing, showing a water leakage. This situation requires the repair or replacement of the drainage pipe. 3.

Loose pipe joints. If the connection joints between the pipes are not tightly installed, water leakage will also occur. The joints between the toilet bowl and the drain need to be checked and re-tightened and tightened.

4.Damaged water leak switch or drain filler. Some toilets are fitted with leak switches or fillers to prevent water from backing up due to empty pumps, which can also occur if these parts are damaged.

Corresponding parts need to be repaired or replaced. 5.Other reasons.

It is also possible that the floor drain is clogged and the water cannot flow into the floor drain after flushing and overflows, or the toilet itself may be broken. Careful inspection is required to determine the actual cause of the water leak. In general, clogged drains and ruptured pipes are the most common causes such as.

You can do your own investigation to determine the possible cause, and it is recommended to find a professional plumber for repair work.

Dear, I'm glad to answer for you: the reason why the toilet seeps on the ground as soon as it flushes; The main reasons for the leakage between the toilet base and the floor tile are as follows, one is that the drain is blocked, and the water may overflow from the lower part, and another reason is that the water storage place of the toilet leaks, and the specific treatment methods are as follows: 1. For the toilet, daily maintenance is also very necessary, and the toilet is completed in accordance with the best glass glue to fix the toilet, so as to be more durable.

2. It is best to clean the toilet regularly, and do not move the toilet, and the water storage space of the toilet is best to be cleaned regularly, so that there will be no problems.

Hello dear, let you wait for a long time, which means that your toilet has a leaking situation, the toilet leaks, mainly consider the following two situations 1The flange ring between the toilet bowl and the pipe is damaged, and there is a leak 2The sewer pipe is leaking in your home, I personally think that there is a high probability that there is a problem with the flange ring connecting the toilet and the pipe, you can find a professional master to check it out, I hope my answer will be helpful to you, if you have any questions, please continue to ask, thank you

This means that there is a leak in the toilet of your home, and the toilet is leaking, mainly consider the following two situations1The flange ring between the toilet bowl and the pipe is damaged, and there is a leak 2There is a leak in the sewer pipe in your home, I personally think that there is a high probability that there is a problem with the law branch file Chilan circle connecting the toilet and the pipe, you can find a professional master to check it 1

I can go on and on for you 3I hope this service can help you, you can click on my avatar to follow me, and if you have any questions in the future, you can consult me again, and look forward to serving you again. Wishing you well; Have a good life and all the best!

The main cause of water seepage in the toilet base is the rupture of the inner wall of the internal toilet.

Solution: 1. Scrape off the glass sealant on the contact between the base of the toilet and the ground.

2. The toilet bowl is lifted and tilted at a certain angle, and the sealing ring on the sewage outlet of the toilet bowl is checked for damage and poor sealing.

3. The new toilet discharge pollution sealing trap is used in the toilet drain outlet.

4. Re-apply glass glue to the part where the toilet is in contact with the ground.

It's that the waterproofing is not done, the artificial materials are less than 200, and then for the repair, the connection leaks, first go downstairs to disassemble the ceiling to see what part of the water leaks, or leak from the connection between the pipe and the floor, and redo the waterproofing.

The drain pipe is not installed properly, it leaks, and it is not waterproofed, so it leaks downstairs.

1. When you press the button and pull the chain inside the toilet, you can open the flush valve. 2. Then there is a large amount of water in the tank to flush into the toilet, so as to flush it clean, and the flush valve will also return to its original position.

The scene was dismantled, otherwise no one could tell.

Flushing toilets and leaking water downstairs are usually caused by upper-floor residents flushing toilets. This can be caused by a clogged toilet, water flowing too fast, or improper use.

First of all, the toilet can leak due to a clogged drain. When the sewer is clogged, the water flows into the toilet, but since the sewer doesn't have a drain, the water overflows and leaks downstairs.

Secondly, if the toilet is flushed too frequently, or the water flow is too large, the key will also cause the downstairs to leak. This could be due to excessive pressure in the water flow, or the toilet is malfunctioning and the amount of water cannot be controlled.

In addition, the toilet can also cause water to leak downstairs if it is not used properly. For example, when there is no gasket installed on the toilet or the fastening screws are loose, water can leak from the bottom and spill into the floor.

To sum up, the leakage downstairs of the flushing toilet is usually caused by problems such as clogged toilets, frequent flushing, and improper use of the toilet. In order to prevent such problems from happening, it is recommended to use the toilet properly, pay attention to the cleaning and maintenance of the toilet, and solve the problem in a timely manner when it is found.