ZTE phone won t charge, what s a good solution?

The reason why the mobile phone battery cannot be charged is:

1. Check whether the charger is normal.

Usually when encountering a mobile phone that cannot be charged, the first thing to consider is whether the charger is normal, whether the charging cable is damaged, whether the charging head is faulty, and whether the contact is poor. If your own charger is damaged, try using a different charger to check if it can be charged.

2. Check whether there is a problem with the data cable, and the user replaces the new data cable to test whether it is charging normally.

3. Check whether the charging port of the mobile phone is damaged.

To rule out whether the charger is normal, then consider whether the charging hole is damaged. Check whether there are any foreign objects blocked in the charging hole and whether the metal contacts are damaged.

4. Consider whether the mobile phone battery is damaged.

Exclude both of the above cases. That's a problem with the phone's battery. If it is really a battery problem, then it is possible that the phone is over-discharged, causing the battery to sleep. It is recommended to take it to a mobile phone repair shop for repair.

1. If there is a problem with the battery level display, you can directly shut down and restart, which is equivalent to data refresh, and the general power display will return to normal.

2. Confirm whether to use the original charger, if the original charger is not used, it is recommended to replace the original charger; If you are using the original charger, you can try to replace it with another charger to charge it and see if it can be charged.

3. If the charger is in poor contact, check whether the charger and the socket are in good contact, and if necessary, the socket can be replaced; Check whether there are foreign objects (such as liquid ingress and sundries) on the charging port of the mobile phone, and the charging interface is not in good contact, wipe the interface clean.

4. If the charging environment temperature is too high or too low, and the mobile phone exceeds or falls below a certain temperature value, it may not be able to be charged. If the temperature is low, it is recommended to charge the phone in a slightly higher temperature environment, or use it for a period of time before charging.

Precautions for mobile phone charging:

1. Don't wait for the battery to run out before charging, excessive discharge of the mobile phone will have a certain impact on the mobile phone, and in serious cases, it may cause the mobile phone to fail to turn on normally, so try to charge it in time when the mobile phone prompts that the battery is too low.

2. Use the original charger and data cable to charge the mobile phone: Non-original chargers may have various problems, which may damage the battery and reduce the service life of the battery. Playing with the phone while charging is easy to wear out the battery and shorten the service life of the battery.

After the charging is completed, please disconnect the power supply in time, 3. Everyone has the opinion that the first three charges of the battery should be charged for more than 12 hours, in fact, this is a misunderstanding, because the current batteries are lithium batteries, just need to be fully charged. Repeat a full cycle of charging: use up to 5% and recharge.

Batteries are consumables and have a normal lifespan of 2 to 3 years, but the actual capacity of the battery decreases as the number of recharges increases.

Summary. Hello, I'm glad to reply to you, the reasons and solutions for ZTE mobile phones that can be charged and can't be turned on:1

If the data cable is damaged and cannot be charged, it is recommended to replace the charging cable with a new one for charging. 2. If the charging head is damaged and cannot be charged, the mobile phone cannot be turned on, so it is recommended to replace the charging head with a new one for charging. 3. If the tail plug is damaged or dusty, resulting in no charge, it is recommended to replace the tail plug after sales or use cleaning tools to clean the tail plug.

4. If there is a problem with the motherboard, it is recommended to go to the after-sales service for testing and replacement.

Hurry up. Hello, I'm glad to reply to you, the reasons and solutions for ZTE mobile phones that can be charged and can't be turned on:1

If the data cable is damaged and cannot be charged, it is recommended to replace the charging cable with a new one for charging. 2. The charging head is damaged, and Zheng Bi cannot be charged to cause the mobile phone to fail to turn on, so it is recommended to replace the charging head with a new one for charging. 3. If the tail plug is damaged or the ash is piled up, resulting in no charging, it is recommended to replace the tail plug after the sale or use cleaning tools to clean the tail plug.

4. If there is a problem with the motherboard, it is recommended to go to the after-sales service for testing and replacement.

1. Under normal circumstances, when pressing the boot button, the voltage at the trigger end of the boot button should change significantly, if there is no change, it is generally the poor contact of the boot button or the boot line is broken, the component is soldered and damaged. When repairing, use an external power supply to supply power, observe the change of the ammeter, if the ammeter does not respond, it is generally a disconnection of the power line or a bad power button. Second, the battery power supply and Kailu defects caused by the non-boot For most mobile phones, after the mobile phone is added to the battery or external power supply, the power supply voltage is directly added to the power supply C, if the power supply voltage is not added to the power supply IC, the mobile phone is impossible to turn on.

For Motorola series mobile phones (except Motorola T2688), the power supply is different, and the battery power supply and external power supply must be converted by electronic switch and then added to the power supply IC.

1. First of all, the mobile phone system is faulty, which causes problems with the battery level display. Solution: You can directly shut down and restart, which is equivalent to data refresh, and the general power display will return to normal.

2. Secondly, the charger is faulty. This malfunction is the main reason why the phone cannot be charged. Solution: When you encounter this kind of problem, you have no choice but to buy another charger.

3. Poor contact between the charger and the mobile phone. This is also a common situation where the charger is not plugged in properly due to carelessness on the part of the phone user. The solution: is to switch the socket back and forth.

4. There is a problem with the mobile phone battery. Generally speaking, it is rare to have problems with your phone's battery. But once there is a problem, it is a big question, and it must be paid attention to.

Solution: So when you find that the charger and mobile phone system are not faulty, you should focus on checking the battery. If you find that the battery is swollen, then it means that there is a problem with the battery and you must stop using it immediately.

5. There are quality problems in the mobile phone itself. Solution: If you buy a copycat phone, then there is a high probability that the phone will malfunction. If it is a brand machine, then it needs to be returned to the original factory for processing.

There may be the following reasons why ZTE mobile phones cannot be charged when they are charged:

The power to the socket is not plugged in properly or damaged. It is recommended to unplug the power supply of the check socket and plug it in or change the socket to charge.

The charging cable or adapter is damaged. It is recommended to replace the cable or adapter.

There is a foreign object in the charging port of the mobile phone, resulting in poor contact. It is recommended to check and clean the charging port.

If the phone's battery is removable, you can remove it and try charging it with a universal charger to see if the battery is broken, and if it is, replace a battery.

The temperature is too low and the phone will not be charged, so you can try to go to a warm place to charge.

If it is not the above reasons that cause the battery to be charged, it may be that there is a problem with the system of the mobile phone, and it is recommended to go to the service outlets of the mobile phone for inspection and repair.

What's going on with the phone not charging.

I used the charger to charge ZTE Q7-C, the current is too large to trigger the mobile phone overcurrent protection, and then any charger can't be charged, and it's useless to change the tail plug, and finally the charging board, the board and the motherboard are disconnected; Another way is to plug in the computer cable and set the charging mode only to remove the overcurrent protection.

I used the charger to charge ZTE Q7-C, the current is too large to trigger the mobile phone overcurrent protection, and then any charger can't be charged, and it's useless to change the tail plug, and finally the charging board, the board and the motherboard are disconnected; Another way is to plug in the computer cable and set the charging mode only to remove the overcurrent protection.

I've also had this problem, and it's okay to change the set of chargers and data cables.

If the battery in your hand can't be charged, you can charge it with the auxiliary software of the next charging, try to use Kingsoft Battery Doctor to help you charge, not only can it be fully charged, but also help your mobile phone save power and extend battery life. Kingsoft Battery Doctor is able to show how much time the remaining power of the battery can be used, and it is relatively accurate. Kingsoft Battery Doctor prompts the charging to be completed when the battery is charged, so as to prevent the battery from being overcharged.

Kingsoft Battery Doctor can retain 80% of the original battery capacity after the battery has completed 400 charging and discharging cycles, and enhance the battery life by more than doubling. Kingsoft Battery Doctor provides a variety of power-saving modes, you can choose the mode that suits you, and use it for a longer time when the battery is not very high.