It is very important to sterilize the bottle, what are the correct ways to sterilize the bottle?

The bottle is the baby's main tool and the baby's rice bowl. We have to wash the dishes before and after each meal to sterilize and disinfect. Therefore, as the baby's main feeding tool, the bottle should also be deeply sterilized.

So how do parents sterilize feeding bottles? Feeding bottles are sterilized by boiling, steaming and microwaving. To boil, prepare a special stainless steel pot and add cold water to a better depth than a bottle that has already been washed.

Add cold water to the glass bottle and boil for 5-10 minutes, then add plastic items such as pacifiers and caps, boil for 3-5 minutes, and turn off the heat. When the water is cold, use a sterilized bottle clip to clip it out one by one, and drain it upside down for later use.

After the plastic baby bottle and other water are boiled, put the bottle, nipple, and cap into the pot and cook for 3-5 minutes. Clamp with a bottle clamp and drain upside down. Using the steam method, clean all the bottles, nipples, and bottle caps thoroughly and put them in the steam cooker.

After disinfection, the steam boiler automatically loses power. Clamp with sterilized bottle clips and drain upside down for later use. Using the microwave method, put the cleaned bottle in clean water, put it in the microwave oven, and heat it for 10 minutes.

However, never put the nipple and cap in the microwave to avoid deformation. Note that if the bottle is not used after 24 hours of sterilization, it needs to be sterilized again before use.

The easiest way is to boil and sterilize: clean the bottles, pacifiers and other utensils, put them in a pot, and boil for 15 minutes to sterilize. If multiple bottles are sterilized in batches, bottles that cannot be used immediately after sterilization should be placed in a particularly clean place.

From the point of view of easy sterilization, glass bottles may be better than plastic bottles. Some parents think that the bottle can be used repeatedly after being scalded with boiling water. Steaming is too troublesome, and it is enough to sterilize it once a day.

However, many bacteria cannot be burned to death. Milk is a very good medium for bacteria. If it contaminates the bacteria, it can multiply within a few hours.

Therefore, it is especially important to sterilize the bottle in order to avoid intestinal infections.

It's an attempt to disinfect while the water is boiling, and it doesn't cost money. Ma Bao can prepare a stainless steel pot for the baby, put the baby's bottle in boiling water for a few minutes to complete the sterilization. The bottle can be used again after drying, and this method also has a good disinfection effect.

But it's best not to let the whole stainless steel pot cook something else, otherwise it will contaminate the clean bottle. Steamers are also a common way to sterilize. Uncover the bottle, turn it upside down in the steamer and turn it on.

There are many such steamers on the market, and the way to use them is also different. Therefore, parents must follow the instructions when using the steamboat to prevent accidents and pay special attention to safety during use. The microwave oven is very hot and will kill germs.

Put a little water in the bottle, wrap it in plastic wrap and put it in the microwave for two minutes. If you want to be cleaner, you can wrap a layer of sterilization tape on the bottle, the effect will be better. The microwave oven is a common appliance in the home, and it is very convenient to eliminate the feeding bottle.

This method is the easiest. Pour the rice water into the bottle, shake it vigorously, pour it out, and soak it in boiling water for a while, which can also play a role in disinfection.

The first method is to disinfect with alcohol and then dry it naturally. The second method is boiled water disinfection, which is more economical.

The most common and simplest way to sterilize a baby bottle is to boil the water method, that is, prepare a pot, and then put some water in the pot, but the water height should exceed the feeding tool, you can put the bottle in the pot and boil together, generally we are about 5 minutes to 10 minutes after the water is boiled, and then put the pacifier in, cook for three or five minutes, after cooking, take these things out, and dry them. In addition, if it is a plastic product, it is recommended not to cook it for too long, and the child's things must be hygienic and not easy to borrow.

If you want to sterilize the bottle, you can remove the bottle and boil it in hot boiling water, so that the sterilization effect can be achieved and it is very clean.

Wash the bottle and put it in a sterilizer, spin it dry first, and then sterilize. When using, wash the bottle before putting it in for sterilization to avoid the growth of bacteria. Feeding bottles should be placed neatly, otherwise it will cause sterilization dead corners.

1. Take 100ml of water from a feeding bottle or other container, and pour the water into the water tank at the base of the sterilizer.

2. Put the utensils that need to be disinfected in the steaming basket, then put the large steaming basket on the base, then put the small steaming basket on the large steaming basket, and cover the top cover of the small steaming basket.

3. Connect the power plug to the socket, and then press the power button to start the sterilizer, and the disinfection indicator lights up to indicate that it is operating normally.

4. The heating process takes about 4 minutes, and the disinfection takes about 6 minutes.

5. Wait for the sterilizer to cool down, and do not open the sterilizer immediately to avoid burns. After cooling, open the sterilizer and take out the utensils, and then wipe the lid and steamer dry.

6. If you want to use it again, you need to let the sterilizer cool completely for about 10 minutes, and then you can disinfect it again.

Attention Questions:1The bottle sterilizer should not be split type, because the sealing of this sterilizer is not good, and the cleaning time is shorter than that of the integrated type;

2.The disinfection time of the bottle sterilizer should meet the national tableware standard, at least 10 minutes or more;

3.The electric heating plate of the bottle sterilizer should be open, and the hidden type cannot remove the scale;

4.The electric heating plate should be made of stainless steel, and the aluminum material is very easy to rust and perforate;

After cleaning the bottle with water, put it in a special sterilizer, turn on the switch of the sterilizer to sterilize, and dry it after 10 to 15 minutes. It should be noted that in this process, the bottle must be cleaned with water first, so as to achieve the best disinfection state.

When sterilizing feeding bottles, there are these misunderstandings that can be avoided:1The misconception that the bottle can be scalded with boiling water can play a role in disinfection, and it is generally necessary to boil the bottle in boiling water for 5 15 minutes; 2.

It is difficult to clean up the places that are easy to breed bacteria, and there are many small corners of the feeding bottle that must be destroyed and need to be cleaned carefully before they can be cleaned; 3.The misconception that the bottle should be disinfected only once every few days needs to be disinfected every day. 4.

If you don't clean it in time after drinking, the correct way is to clean it in time and don't leave it for too long; 5.Wash the bottle with only clean water, and the correct way is to use a milk brush and add an appropriate amount of detergent.

Pay attention to the number of disinfection, but also pay attention to the method of disinfection, to choose glass bottles, can not be frequently disinfected, to take the first foot to take high temperature boiling way of disinfection, these dust slippery conditions are sent to celery is to avoid.

Can not be disinfected often, pay attention to the method of disinfection, but also pay attention to the selection of the quality of the bottle, take the high temperature of the macro boiling method of disinfection, try to choose the glass bottle, control the number of disinfection.

Milk God rental bottle has a period of use, especially plastic bottles, after a period of use, the bottle body will be oxidized due to brushing, blurred fog and milk scale is not easy to remove, so it is recommended to replace the socks about 3 to 6 months, but if the surface is damaged and worn, it should be replaced immediately.

When disinfecting, not only sterilize the feeding bottle, but also the pacifier, lid, and straw must be disinfected together, and these things must be soaked in water.

Boiling water scalded, I thought it was sterilized, every time I used a bottle to shake a book, I thought it was clean, and I washed the bottle, but rarely washed the milk cap.

The correct way to sterilize the bottle is as follows:

Material preparation: a feeding bottle, a cooking pot, gauze, etc.

Prepare a stainless steel pot and fill it with cold water so that the water completely covers the milk utensils. Note: The pot must be used exclusively for sterilized feeding bottles, and it is best not to mix it with other cooking foods at home.

2.After removing the nipple and bottle cap, place the bottle in the pot and bring to a boil. Note: Plastic bottles are best placed in boiling water, while glass bottles can be placed in unboiled water.

3.After the water boils, put in the nipple, bottle cap, etc. for 5 10 minutes, cover the pot and cook for another 3 5 minutes, turn off the heat. Plastic bottles should not be burned for too long, so put them in the nipple immediately after the water boils and wait for another 3 to 5 minutes.

4.After the water is cool, take out the nipple and bottle cap with a bottle clip, put it on a clean utensil and dry it upside down, place it in a ventilated and clean place, and cover it with gauze or a lid).

Precautions for washing baby bottles:

1.After feeding, discard the remaining milk first.

2.Rinse the bottle with water, pour in the cleaning solution, and use the bottle brush to clean all corners.

3.When cleaning, special attention should be paid to the bottleneck and spiral so that they can not be missed.

4.Turn the nipple over first and wash it carefully with a nipple brush. The area near the nipple hole is thin, so be careful not to let it crack.

5.When washing, pay attention to cleaning the milk scale in the nipple hole to ensure that the milk hole on the nipple remains unobstructed.

6.After washing the bottle, rinse it with water.

7.If there is a milk stain that has condensed on the nipple, soak it in hot water for a while, and then brush it off with the nipple when the milk stain has softened.

It is correct to boil the bottle in boiling water, and it needs to be sterilized to ensure the health of the baby. Boiling with boiling water, washing with disinfectant, automatic swelling with a milk cooker, washing with edible dish soap, wiping with a face towel, these disinfection methods can sterilize the bottle, so as to ensure the health of the baby.

Blanching with boiling water for bottle sterilization is not an effective method; The correct disinfection method should be to use a special detergent for regular sterilization and disinfection, you can boil them in hot water, cook for about half an hour, or you can put them in an extreme environment for refrigeration, which can also play a role in sterilization, or put them in a very high temperature environment for sterilization, just rely on boiling water, can not complete the effect of disinfection.

If boiling water does not achieve the effect, you should buy a steam disinfectant for high-temperature disinfection, or an ultraviolet sterilizer can also be used.

It means that the bottle that is very effective should be boiled in boiling water, and it can also be sterilized with a special ultraviolet disinfection cabinet.