What kind of soft glue is used for sticky leather, and what glue is used for sticky leather

HY-P121 soft rubber for sticky skin. Viscose leather can be glued with HY-P121, which is soft after curing.

HY-P121 leather glue is widely used in various materials such as shoemaking, such as molded EVA, EVA artificial leather, PVC, genuine leather, PU foam and artificial rubber plastic. Weather resistance.

Aging resistance, heat resistance, non-stringing, resistance to yellowing under UV light or sunlight.

Excellent, strong adhesion and other characteristics.

The glue used for the bonding of leather vegetable materials can be either all-purpose glue or hot melt glue.

However, compared with the two, it is recommended to use hot melt adhesive to bond leather, after all, hot melt adhesive is more environmentally friendly than all-purpose adhesive. But when using hot melt adhesive to bond leather, it is also necessary to choose according to the type of material that is bonded to the leather:

1. Dermal bonding: There are many tiny pores on the surface of the dermis, so it is recommended that the hot-melt adhesive web film be used for the bonding of the dermis, which will not cause pore blockage and affect air permeability.

2. Bonding between leather and sponge: It is also recommended to use hot-melt adhesive web film as an adhesive.

3. Bonding of leather and non-woven fabrics: use hot-melt adhesive web film as adhesive.

4. Bonding of PU leather: hot melt adhesive film can be used as adhesive.

Adhesive leather T818 glue for leather can be adhered to.

Adhesive PU leather is bonded with T866 soft glue.

Sticky leather is recommended to use leather special glue, if the real sales conditions do not allow, you can also use 801,966, commonly known as all-purpose glue, the brand has two good brothers, evergreen and other viscose skin, leather effect is good. P121 is a good choice It is widely used in various materials such as shoemaking, such as molded EVA, EVA artificial leather, PVC, genuine leather, PU foam and artificial rubber plastic. Weather resistance, aging resistance, heat resistance, no wire drawing, under UV light or sunlight, excellent yellowing resistance, strong adhesion and other characteristics.

Viscose with 502 glue.

502 glue is used for the next step of porous and absorbent materials for the self-bonding or mutual bonding of steel or non-ferrous metals, rubber, leather, plastics, ceramics, wood, non-metallic ceramics, glass and flexible materials such as rubber products, leather shoes, soft and hard plastics.

However, for difficult-to-bond materials such as polyethylene, polypropylene, and PTFE, their surfaces require special treatment to bond. It is widely used in electrical appliances, instrumentation, machinery, electronics, optical instruments, medical, light industry, civil and other industries.

Adhesive leather with 401 glue.

401 glue is a one-component fast-curing adhesive synthesized by advanced production process based on methyl cyanoacrylate, tackifier, thickener, stabilizer, toughening agent, polymerization inhibitor, etc.

401 glue is a general-purpose type of denier, medium viscosity and fast drying, used on inert surfaces to bond porous, acidic and absorbent materials. It is widely used in the bonding and lamination of metal, plastic, eraser, wood, leather, ceramic, wood and other mold pins.

Dear, I'm glad to answer for you. Sticky leather is recommended to use leather special glue, the real conditions do not allow the Yunsun to disturb the words, you can also use 801,966 commonly known as all-purpose glue, the brand has two good brothers, siden evergreen and other viscose leather, leather effect is good. P121 is a good choice It is widely used in various materials such as shoemaking, such as molded EVA, EVA artificial leather, PVC, genuine leather, PU foam and artificial rubber plastic.

Weather resistance, aging resistance, heat resistance, no wire drawing, excellent yellowing resistance under UV light or sunlight, strong adhesion and other characteristics.

Adhesive leather is best with leather-specific glue.

Leather glue is divided into two series of leather leather glue and PU leather glue, the general leather is applied to the real leather glue, PU leather with PU glue. Genuine leather glue is a polymer material, the introduction of international environmental protection formula and advanced technology surplus sales and precision of the one-component glue, with room temperature curing, easy operation, water resistance, acid resistance, shock resistance, high solid content and many other advantages.

How to use special glue for leather:

1. Use a dry cotton cloth or sandpaper to remove the dust, oil, rust, etc. on the joint, and then wipe it with acetone or trichloroethylene and other cleaning bucket agents to clean the surface.

2. Place the nozzle at a distance of about 20 cm from the adherent object (such as a sponge) and about 45 degrees from the surface of the adherent. Press the nozzle to move at a uniform speed on the surface of the adhered object to ensure that the colloidal body is uniform and appropriate, and there can be no glue accumulation, lack of glue, unevenness, etc., and at the same time, it is necessary to spray glue on both sides and leave it for 1 3 minutes. In the weather with low temperature and high humidity, the drying time should be appropriately extended.

3. After use, please turn the tank upside down, press the nozzle to spray a little gas, remove the residual glue in the nozzle, and prevent the glue from clogging the nozzle when you use it next time.

4. After the spraying is completed, after the appropriate drying time (the specific drying time depends on the actual temperature, referring to the dry touch and viscous strength), the pressure bonding can be applied. The recommended optimal operating temperature for this product is 20 35.

Precautions for leather special glue:

1. The glue is flammable, and the storage and transportation shall be handled according to the rules of flammable products.

2. Operate in accordance with the national flammable goods policy when using. <>

You can use spray glue, a kind of glue that can stick leather, which is more suitable for sticking soft leather.

Spraying glue is often used for the bonding of leather, paper, wood, plastic, PVC, PE, EVA, metal, rubber, thermal insulation cotton, fireproof board, aluminum-plastic board and other materials. Sofas, sponges, sofas, mattresses, swivel chairs, etc. are all sprayed.

Features: Stupid sail 1, strong initial viscosity, fast speed, easy to use with hail, improve work efficiency;

2. The spray surface is larger, which is generally 12 planes per kilogram;

3. Impermeable pressure-sensitive adhesive, sticky for a long time;

4. The sticky object can be easily removed and pasted with a new positioning;

5. The spraying particles are fine and transparent, and will not cause spots, shrinkage and penetration for most materials.