Help.,Why does my computer skip frame 10 when it s configured to masturbate.

Give a few suggestions, I hope it helps you.

1.It may have something to do with your graphics card, this is hardware, so it can't be avoided (looking at your memory 4G should be fine).

3.If you share the Internet with others, it depends on how you discuss it with the people you use it for, and try to play when you are not watching Internet TV.

It should be within the normal range and won't have much of an impact on your game.

5.There are more people on the server, and it will also have an impact on when you play, thank you!

It should be a network issue.

This graphics card Call of Duty 9 is at 1920x1080 resolution, and high special effects are no problem.

A little masturbation, what a masturbation.

What kind of game to play,This configuration is no problem for general online games.,The performance is still good.,But the single-core execution efficiency of CPUAMD,It's relatively weak for games, especially CPU-focused games.。

There shouldn't be this situation in your configuration, there are two possibilities, 1. Your special effects are not turned off, 2. Your graphics card is fake, or there is a problem with the driver.

In the graphics card settings, you have V-Sync turned off.

Or change to the most suitable graphics card driver.

The 6770 card should not perform so badly, you change the driver more.

Possible Causes:

The game resolution is set too high: reduce the resolution appropriately, the widescreen size of the notebook is generally set to 1366*768, and you can adjust it down appropriately. The resolution is high, which is very much the processing power of the video memory and graphics card.

I estimate that your monitor is not small, so the default resolution is turned on very high.

Magic Effect Low Point: The team battle card is obviously caused by a lot of magic effects during team battles.

Frame rate jumps are normal.

It's mainly a problem of inching.,CPU and memory in general, you can go into the game without any problem.,That is, this situation is that your graphics card is small.,Change to a larger graphics card.,You won't be comfortable playing.,But it's nothing if you don't change it.,The game can also be played.,It's a card when there are more people! In this case, it's your network problem, or the server of the game you play has a stuck problem, you can check the following your network, and then communicate with the game official about the following How to get it, I play League of Legends generally has about 250 frames, but the jump is too strong to open the graphics card properties, preferences, and choose to follow the windows scheme color scheme and advanced view. The rest is modified as I told you earlier.

After my method, it doesn't work.,Just reinstall the system once.,It's generally fine.,Anyway, it's just playing League of Legends.。 It was normal before, what it looked like at 300 frames. It's very stable, and it's not right for my system to be recharged.,Of course, there's no problem with playing any game just bought it.,It's not going to be able to play now.,Can there be any good way to deal with it?,Insist on it for a while and say that the laptop can't be upgraded.。

The game version has been upgraded, and the hardware configuration requirements have also increased. You can turn the game display to the lowest to see if it works, and in addition, allocate more video memory to the graphics card in the BIOS. The laptop is equipped with dual graphics cards, one is AMD

radeon

HD6630M, another.

is mobile

intel(r)

HDGRAPHICS, I'm mistaken, 6630m is just a low-end graphics card that is not suitable for gaming. If you want to play games, the laptop must be an N card to be better, and it must also be a model above GT650M. The N-card can be set to high performance, only for NVIDIA graphics card users, right-click on the desktop - NVIDIA Control Panel - Manage 3D settings - select High Performance.

This way, you won't have to play games with a set display. AMD graphics card - display card properties - game - 3D application configuration - bottom.

opengl

Setup - Put the triple buffered hook on it, and the frame rate will be greatly increased. The easiest way to set the power supply is to click on the power icon in the lower left corner of the notebook to change it to high performance, which may be slightly different from other machines.

But it's all the one that picks the highest. cpu

Setting this can be the default 70%.

Adjusting to 100% can help the system speed up the calculation. Turn off the in-game qt and qq

If you often use team voice, don't turn it off. If you don't have to turn it off, the game will be much smoother. Game Screen Settings:

In the game settings, the vertical should not be turned on, the special effects should not be turned on very high, and the low special effects should be selected to help the picture be smooth. During the power war, you can choose the battle optimization in the basic settings.

If the computer temperature is too high, it will cause frame drops, so you can go to the store to clean the dust and ask them to help you reapply some silicone grease, if the temperature is too high for a long time, the silicone grease will dry quickly. Then I don't know what type of radiator your book is.,If it's copper tube + fan heat dissipation,At least double copper tubes.。 It will be better for you to connect an external radiator, but pay attention to dustproof, adding an external radiator may cause dust accumulation in the fan to become faster, if you can disassemble the computer, it is best to disassemble it yourself after 3 months to clean it up.

The possibility of the system is relatively large, it is recommended that you change back to the win10 system to try.

Do you call this a computer repair? Sister's. Clean up the dust from your computer first. Enter the network acceleration under the registry mode settings.

There is a teaching on the Internet, not to go into details, under the optimization of the next optimization software. This is the novice method.

Playing games has a direct relationship with both the hardware and software of the computer.

If there is a large number of frame skips, you can use the driver wizard to detect whether the hardware driver is installed or updated to the latest, the common problem is the graphics card driver, and then check whether the computer hardware meets the configuration required by the game.

It is recommended to check your computer with antivirus software, fix computer vulnerabilities and clean up your computer's junk. Keep your computer running fast.

If the frame rate of the game does not fluctuate much during the game, but the frame rate fluctuates greatly in a special environment, you can appropriately reduce the game effect to ensure the frame rate.

If the computer hardware and drivers, network and settings are normal, it is recommended to replace the operating system.

The graphics card doesn't have enough computing power to handle your game. Change the graphics card, this can't be helped.

It's all skipping, and you don't change the graphics card.

==,lz can be said to have to change the graphics card.,Or your game requires a high configuration.,You can play with a low configuration demand to try.,It seems that the graphics card of lz is very old.,Ask for adoption.。

1.First of all, check whether you prefer to use a discrete graphics card, if you start a game and the computer is set up to use an integrated graphics card, it will also be normal.

2.Second, make sure to check whether the graphics card driver needs to be upgraded and whether the driver is up to date when using a discrete graphics card.

3.If you need to upgrade, please upgrade the graphics card driver as required, and make a backup of the original driver before upgrading.

4.Before entering the game, make sure to close other programs and processes, as programs and processes outside the game will eat memory, graphics cards and other resources.

5.Make sure you have the latest version of DirectX installed on your computer

It is recommended not to install some domestic third-party optimization software as much as possible.

1. You can go to the official to check and update the graphics card driver, etc., and the driver is updated to the latest.

Dell is officially driven.

Uninstall the graphics driver, reinstall the graphics driver, and try a few more versions to see which one fits.

Computer frame skipping refers to the phenomenon of stuck, unsmooth, and frame skipping when the computer is playing a game, which seriously affects the user's experience and experience. There are many reasons for frame skipping problems, let's analyze them one by one and how to solve them.

1.The frame rate is too low.

Frame rates that are too low are a significant cause of frame skipping. Frame rate (fps) refers to how many frames of the image will be displayed per second, if the frame rate is too low, the picture will freeze and not be smooth**. The solution to this problem is to upgrade the graphics card or replace the CPU to improve the hardware configuration of the computer.

2.The computer does not have enough cache.

Another reason for the problem of frame skipping is that the computer cache of the jujube ball is insufficient. At the time, the system caches the cache in memory or hard disk before proceeding. If your computer's cache is insufficient, you will have frame skipping issues.

To solve this problem, you can increase the storage space of your computer's hard disk or memory while cleaning up junk files and temporary files.

3.Computer virus infection.

Computer virus infections can also cause frame skipping problems. Viruses can take up your computer's resources, causing it to run slower and not run smoothly. We should check regularly, kill viruses, and clean up the useless files of the computer.

4.Excessive background processes are consuming resources.

In conclusion, there are various reasons why frame skipping problems occur. We should try our best to find the crux of the problem and take appropriate measures to ensure the smooth operation of the computer. At the same time, carefully maintain the computer and maintain it better to avoid the occurrence of this frame skipping problem to the greatest extent.

1.Hardware reasons: the computer configuration is not high enough, the graphics card or memory is insufficient, etc.

2.Software causes: too many background programs and startup items, virus or malware infection, etc.

3.System problems: the driver is not updated in time, the system is too old, etc.

So, how to solve the problem of computer frame skipping?

1. Clean up the computer hardware: Regularly clean the memory and hard disk of the computer to reduce the temperature of the CPU and graphics card.

2. Close background programs and startup items: Close useless programs and auto-start items in Task Manager to reduce the burden of running.

3. Repair virus or malware infection: Use anti-virus software to conduct a comprehensive scan of the computer and clean up the existing viruses or malware in time.

4. Update the graphics card driver: Update the graphics card eviction and lease chain program in time to avoid mismatch.

5. Optimize the system: regularly update the system to ensure the stability of the system, and delete unnecessary files and programs.

In short, to solve the problem of computer frame skipping, it is necessary to analyze the cause of the problem, find corresponding solutions, and comprehensively deal with different problems The key to improving computer performance.