How does DJI plant protection drone plan its range?

You can use drones to fly dots to plan routes, or you can walk around the ground with a remote control to plan routes.

Execute the job.

T20] Remote control planning (network.

Flight planning. Execute the job.

T16] Remote control planning.

Flight planning. Execute the job.

mg-1p/1sa】

Remote control planning.

Aircraft planning. Execute the job.

mg-1s】

Plan and execute jobs.

Strongest battery life: Daheng Huijiang Matrice 210

Endurance: 38 minutes (no-load, high-capacity battery).

27 minutes (no-load, normal battery).

Maximum ascent speed: P mode A model god barrage type S mode: 5m s Maximum descent speed: Vertical: 3m s

The maximum horizontal flight speed in the maximum swimming mode: 23 m s in S mode, 17 m s in P mode, and 23 m s in A mode

It can work stably in wind and rain, its intelligent flight mode can automatically avoid obstacles, the fuselage can resist magnetic interference, provide high reliability and high-precision control, and the thermal imager is convenient for search and rescue personnel to lock the rescued person.

The smart batteries used by different devices are different, and the figure below lists the capacity and battery life of Huihu smart batteries of different products of Crack.

Aerial Photography Aircraft Series]: Aircraft, remote controller, and goggles equipment short press the battery switch once, and then press and hold the battery switch for more than 1 second to turn on and off;

Power on and off. The aircraft is powered on.

Press (release) briefly (release) and then press and hold the power button for about 1 second to turn on the aircraft.

The aircraft is powered off.

When the aircraft is powered on, press (release) briefly (release) and then press and hold the power button for about 1 second to turn off the aircraft.

The method of turning on and off the remote controller is the same as that of the aircraft.

Takeoff. After the aircraft is powered on and connected to the remote controller, it can take off in one of the following ways:

Automatic take-off. dji fly

Please click Enter a description.

dji go 4

Please click Enter a description.

Manual take-off. After the aircraft is turned on, the remote controller will play the lever for about 2 seconds according to the diagram below, and the propellers will start to rotate. Then hit the ascending rod and the aircraft can take off.

Please click Enter a description.

Taking the American hand as an example, the rising lever is the left joystick of the remote control, and the aircraft can take off by pushing the joystick upwards.

Please click Enter a description.

Landing. Automatic landing.

When the aircraft returns to the vicinity of the Home Point and is in the air of a landable location, tap the button on the flight interface of the DJI FLY app, and then press and hold "Land", and the aircraft enters automatic landing.

Landing manually. After the aircraft returns to home, or needs to land after the flight (at this time, the aircraft is already in the air of the landing place), you can push the left joystick down, and the aircraft will slowly descend, and when descending to the ground, continue to push the joystick downwards for about 3 seconds to stop the motor, and the aircraft will complete the landing.