What should I do if the wall breaker only heats up and does not crush What should I do if the wall b

Wall breaker. Failure is also an occasional thing, if the wall breaker you buy only heats up and does not crush is a very embarrassing thing, after starting, it shows heating but does not turn, and the soy milk you want cannot be presented, then, what is this failure? What should I do?

The wall breaker only heats up and does not crush what the fault is

The wall breaker on the market can be roughly divided into two types, one is a manual control wall breaker, and the other is a multi-functional wall breaker, which is electronically controlled. In the case of a manually controlled wall circuit breaker, the power indicator lights up but does not turn on when plugged in, which may prove that there may be a problem with the mechanical control components. After cutting off the power and connecting it multiple times, it still doesn't work.

This is due to this reason and you can't fix this issue on your own.

You need to contact after-sales service to send the wall breaker back for resolution. If there is a local repair point, you can also contact the local repair point to deal with it. The wall breaker in the hands of most friends should be a multi-functional wall breaker.

If you can start this type of wall breaker, you can also press the function button, but the blade will not rotate. Then the reason is that this part of the electronically controlled blade has malfunctioned and multiple connection attempts have failed. After that, you need to contact after-sales service or go to a local repair point to deal with it.

What should I do if the wall breaker keeps heating and does not rotate

Normally, the soymilk machine can heat the soy milk after processing the beans, and it only takes ten minutes to drink a cup of fresh soy milk. If the soymilk maker only heats up and does not rotate, it may be due to the following reasons. It is advisable to double-check and investigate:

1.The motor is damaged. If the motor of the soymilk maker is damaged, it will cause the soymilk maker to fail to operate, and the motor needs to be replaced.

2.A fuse in series with an electric motor.

Damage. When the above situation occurs, the fuse that is connected in series with the motor can be checked to see if it is damaged. If it is damaged, it needs to be replaced.

3.The head is too tight. If the cutter head of the soymilk maker is too tight, it will also cause the soymilk maker to only heat up and not rotate. You can try to loosen the cutter head yourself.

Does the multi-function wall breaker cost electricity?

The multi-function wall breaker is also very power-hungry, and many people will pay attention to the power index when buying a wall breaker. In general, the higher the power of the wall breaker, the higher the kinetic energy and load velocity, and the desired wall breaking effect will be achieved. However, the power of the wall breaker should not be too large.

The more power the wall breaker has, the greater the power consumption. Therefore, it is best to choose a wall breaker with lower power and higher speed.

There are 4 reasons why the wall breaker has been heating, the first motor is broken, the second motherboard temperature control circuit is bad, the third has been heated to 79 degrees Celsius, it will be stable and has been heating non-stop, replacing the cup thermostat to 50k, the fourth has been heating to 70 degrees Celsius, it has been heating non-stop, and the cup thermostat has been replaced to 100kI hope that there are 4 reasons why the wall breaker has been heating, the first motor is broken, the second motherboard temperature control circuit is bad, the third has been heated to 79 degrees Celsius, it will be stable and has been heating non-stop, replace the cup thermostat to 50k, the fourth has been heated to 70 degrees will be stable and has been heating non-stop, replace the cup thermostat to 100kHope for comments.

Wall breaker. It is possible that the electronically controlled blade is faulty if it is only heated and not crushed, and it should be repaired by contacting after-sales service or taking it to a repair point. The purchase of the wall breaker depends on the configuration, the wall breaker should choose a dual-frequency motor, the greater the motor power, the faster the speed; In addition, it is necessary to look at the brand of the wall breaker, and the purchase of a good brand can be guaranteed.

1. When the wall breaker can not be crushed, first check whether its power-on is normal, generally see if the indicator light can be lit up, if the indicator lights on the display panel are not lit, it may be caused by the power supply is not connected, plug in the plug or see if the power cord is damaged.

2. Check again whether the cutter head of the wall breaker is stuck, for example, when using the wall breaker, too hard food is placed in it, and some residues are easy to get stuck on the cutter head and cause it to not rotate. Or if the cutter head is tightened too tightly, it will also cause this problem of not crushing, so cleaning the cutter head and loosening the cutter head properly can be solved.

3. After that, you need to open the base of the wall breaker, and then check whether the circuit is normal, mainly check the line connected to the motor, such as the fuse.

Whether there is burnout, or whether there is damage to the components in the circuit, etc., if so, the corresponding components should be replaced.

Hello:To be on the safe sideWall breaker.

The design hasSafety switch: If you don't have a tight cover, you can't rotate with dust. Defeated TongIfIf the protection switch is damaged, the motor cannot be rotated.

2. The wall breaker uses [Single-phase series motorIfCarbon brushesWorn or damaged, it can't be turned anymore.

Hello: 1, [for safety] The wall breaker is designed with a safety switch: it cannot be rotated without a tight cover.

If the protection switch is damaged, the motor cannot be turned. 2. The wall breaker uses [Rotten Curved State Single-phase Series Motor], if the carbon brush is worn or damaged, it cannot be rotated.

The wall breaker can only be heated, and there are many reasons why it does not rotate, so there is no way to solve it if you look at it this way, you can only send it to the repair department, and they will give you a normal pass through the gear detection before the number of grandchildren knows, if we speculate, he belongs to the small engine inside the question of Xingkai stove, so it is because of this that the power is insufficient.

Summary. Hello, what is the reason why the wall breaker does not rotate.

1. The upper cover and cup of the wall breaker are not installed in place, in order to prevent the overflow of ingredients during the link, the functional area light is in the alarm state, and the wall breaker cannot be rotated to work. It is recommended to check the handle of the cup and the upper lid, usually there will be a logo on it, just rotate the upper lid and align the two logos before the machine can work normally.

2. The cup body is connected abnormally with the base switch, under normal circumstances, the style of the bottom surface of the cup and the base is matched, and it can work normally as long as the card is in place. You can rotate the cup and hear the sound of the cup connecting with the base switch.

3. Part of the wall breaker belongs to the electronic control type, if it can be started, the function keys can also be pressed, but the blade just does not turn, then the reason is that there is a problem with this part of the electronic control blade, and it is recommended to contact the after-sales service or go to the local maintenance point to deal with it.

The wall breaker can only be heated without rotating, what is the reason for this?

Hello, what is the reason why the wall breaker does not rotate 1, the upper cover of the wall breaker and the cup are not installed in place, in order to prevent the overflow of ingredients when linking, the functional area light is in the alarm state, and the wall breaker cannot rotate to work. It is recommended to check the handle of the cup and the upper lid, usually there will be a logo on it, just rotate the upper lid, and bury the two logos in line before the machine can work normally. 2. The cup body is connected abnormally with the base switch, under normal circumstances, the style of the bottom surface of the cup and the base is matched, as long as the card is in place, Song Shen can work normally, if the cup body is connected with the base switch abnormally, the wall breaker can not rotate to work.

You can rotate the cup and hear the sound of the cup and the base opening key. 3. Part of the wall breaker belongs to the electronic control type, if it can be started, the function keys can also be pressed, but the blade just does not turn, then the reason is that there is a problem with this part of the electronic control blade, and it is recommended to contact the after-sales service or go to the local maintenance point to deal with it.

4. It is also possible that the motor protection mechanism is generated due to long-term continuous use of overheating, resulting in the inability to start, and this situation can only be continued after the motor is cooled. Before using the wall breaker, you must carefully and carefully refer to the manual, and if you don't understand, you can consult the merchant carefully, and then operate and use it after understanding. 2. During the use of the wall breaker, it must be operated in strict accordance with the provisions of the manual, otherwise it is easy to cause safety accidents.

Especially for the elderly, attention should be paid to remembering the order of operation.

Summary. The wall breaker can only be heated without rotating, what is the reason for this?

Hello dear, 1. The upper cover of the wall breaker and the cup are not installed in place.

2. The connection between the cup body and the base switch is abnormal, and the wall breaker does not rotate to work.

3. If it can be started, the function buttons can also be pressed, but the blade does not rotate, it may be that this part of the electronic control blade is faulty.

4. It may be that the motor protection mechanism is caused by overheating after continuous use for a long time, which can not be started, so it is recommended that you find a professional for maintenance. I hope I can help you! If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, your support is also the motivation for my progress, and finally I wish you good health and a happy mood!

The wall breaker can only be heated without rotating, what is the reason for this?

The wall breaker can only be heated without rotating, what is the reason for this? Hello dear, 1. The upper cover of the wall breaker and the cup are not installed in place. 2. The connection between the cup body and the base switch is abnormal, and the wall breaker does not rotate to work.

3. If it can be started, the function buttons can also be pressed, but the blade does not rotate, it may be that this part of the electronic control blade is faulty. 4. It may be that the motor protection mechanism is caused by overheating after continuous use for a long time, which can not be started, so it is recommended that you find a professional for maintenance. I hope I can help you!

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, your support is also the motivation for my progress, and finally I wish you good health and a happy mood!

You can make soy milk for cold drinks, and there are a lot of bubbles in it spilling out of the lid, is it a cup problem?

You can beat the soy milk with cold drinks, and there are a lot of bubbles in it overflowing to the top, is it a cup problem, hello dear, the first thing that causes the soybean milk to overflow should be the foam; Soy milk is rich in vegetable protein, and the protein is very easy to form foam, so the foam is mixed with water and the volume expands, so the water level rises or even overflows; The soymilk machine has a water level mark on the cup wall, and secondly, the soymilk machine has a small anti-overflow mechanism, which is a small rod sticking out of the machine head, but if you add too much water, the soybean milk mixed with a large number of small bubbles will float up and overflow The simple way to deal with it is to operate according to the water line, I hope mine can help you! If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, your support is also the motivation for my progress, and finally I wish you good health and a happy mood!

Summary. 1. The power supply is not connected normally, such as switch failure, motor failure, socket failure and so on.

2. The motor is overheated, and the power is cut off due to automatic start protection.

3. There is not enough water in the wall breaker, and it cannot complete the work; The food in the wall breaker is too large to handle; The food and water in the wall breaker do not exceed the cutter head, and the cutter head does not work if it does not touch the food.

4. The line of the wall breaker is in poor contact, and the line is faulty.

When the wall breaker does not work, it is recommended to rule it out in the same way, see what the cause is, so as to determine what the problem is. If there are many faults of the wall breaker, or it cannot be seen through the naked eye, the wall breaker needs to be disassembled before it can be viewed, it is recommended that it is best to be handed over to the after-sales maintenance personnel of the wall breaker brand, and the wall breaker can be repaired only after the wall breaker is disassembled.

The wall breaker can only be heated without rotating, what is the reason for this?

Hello, I am Li Quan, a co-teacher of Tingmu Ask, who has been committed to the electronic finger major for 12 years, and I am happy to serve you. Your question has been received, it will take a little time to type, please wait a while, please don't end the consultation, you can also provide more effective information, so that I can better answer for you.

Hello, I'm glad to answer for you, the reasons are as follows: 1. The power supply is not connected normally, such as switch failure, motor failure, socket is not energized, etc. 2. The motor is overheated, and the power is cut off due to automatic start protection. 3. There is not enough water in the wall breaker, and it cannot complete the work; The food in the wall breaker is too large to be dissolved; The food and water in the wall breaker do not exceed the cutter head, and the cutter head does not work if it does not touch the food.

4. The line of the wall breaker is in poor contact, and the line is faulty. When the wall breaker does not work, it is recommended to rule it out in the same way, see what the cause is, so as to determine what the problem is. If there are many faults of the wall breaker, bending fast or can not be seen through the naked eye, you need to disassemble the wall breaker socks to view it, it is recommended that it is best to be able to hand over the wall breaker brand after-sales maintenance personnel, the wall breaker can be repaired only after the wall breaker is disassembled.