Can t the wall breaker break the beans? Why can t the wall breaker beat soy milk?

Wall breaker. If you can't break the beans, first of all, it may be that the speed of the wall breaker is relatively low, or your beans have not been soaked, or your beans have a relatively short time, so you can appropriately extend the time of beating beans.

Most of them are caused by the above reasons: 1. Blade. If the blades of the soymilk machine are worn, there is a risk that they will become dull and will not be able to perform their normal functions.

2. The power is not up to standard. If the power of the motor does not reach the rated power, it will cause problems in the operation of the entire soymilk machine, so that the beans cannot be broken. This is done to check if the motor is damaged.

3.The beans are not processed in advance. Not all brands of soymilk machines have the function of dry beans, so some brands of soymilk machines need to soak the beans in advance before use, and the time should be a little longer, so as to ensure that they are broken.

1. Check the amount of beans and water You can read the instructions to see whether the water is less or the beans are more 2, soak the beans, generally soak them overnight, although the beans that have not been soaked can be beaten, but the effect and taste will be bad. If you are greedy for fast, you can't enjoy the delicious 3, eliminate the above problems, it may be the fault of the machine itself, you can contact the after-sales service to solve it.

The reason why the beans can't be broken: Generally, the filter of the soymilk machine should be considered, if the side mesh of the mesh cover or the bottom mesh is dry and blocked, there will be problems such as rough soymilk and large particles made by the soymilk machine.

The beans are relatively hard, so before hitting the beans with the wall breaker, the beans need to be soaked in water in advance, so that it will be more convenient to beat with the wall breaker, and the cutter head of the wall breaker also needs to be replaced.

Wall breaker. There are many reasons why soy milk can't be beaten. It can also be understood as a failure, so let's take a look at the common failures and how to solve them:

1. The blade does not rotate when the wall breaker starts.

The ingredients are too large to rotate, so take them out and cut them into small pieces and try to add them.

If the motor of the broken wall blender is broken and cannot be rotated, find the after-sales service to check whether the motor is broken.

The gear setting is incorrect, press speed + to increase the speed of the book.

2. The machine cannot work (the LCD screen has bright light).

The working time is not set when the wall breaker processes special recipes; Solution: Set the working time according to the instructions or recipe instructions, and see if you can solve it.

The wall breaker works continuously for a long time, and the motor is overheated for protection; Solution: Naturally cool to room temperature and operate according to the working time specified in the manual.

Overload work, motor overload protection; Solution: Reduce the amount of ingredients added, and add the maximum amount of ingredients according to the instructions or recipes, because it is easy to burn the motor if it is overloaded, and the protection mechanism will appear.

3. What should I do if the machine is plugged in and there is no display?

First of all, check whether the power supply is energized, whether the plug-in board has electricity, and test it with other electrical appliances.

The brand of the wall breaker is different, please take a look to confirm whether the switch of the wall breaker is not pressed.

The circuit problem of the wall breaker machine needs to be checked by professionals, and the reason may be that the circuit in the machine is virtual or broken, the components on the motherboard are broken, the short circuit breakdown, etc., the motherboard link display board is broken, and the keys are broken.

The function of the wall breaker is more, if you hit the soy milk, it does not work, which shows that this contact point may have a problem with Kaicha, let the master repair the bridge.

When using a wall breaker to beat the beans is necessary to soak in advance. Soaking beans can not only make the juice of the beans better, but also more delicate, without filtration, and reduce okara.

After using the wall-breaking cooking machine, you need to pay attention to adding an appropriate amount of water and turning on the machine for about 15 seconds, which can have a cleaning effect.

After the wall breaker is used, be sure to clean the container, cup cap and cap, if you process greasy food, clean it with detergent, then rinse it with water, and wipe it dry, be careful not to use corrosive cleaning supplies, wipe it with a clean wet rag.

When the wall breaker is not in use, it needs to be stored in a cool and dry place, so as to avoid the wall breaker from getting wet, and you must pay attention to it when using it.

The wall breaker should be placed on a spacious, flat tabletop, not on the edge of the table, which can prevent some falling problems when the wall breaker is in use.

The wall breaker is not recommended to be used in a high-temperature environment, which can easily lead to motor damage and may even cause some unnecessary safety accidents.

In addition, most wall breakers have a heating function, which can be fully utilized when in use.

A lot of people don't know about wall breakers.

Can you beat raw beans brother bend? The wall breaker can actually beat raw beans, because the performance of the wall breaker is relatively strong, and there are more ingredients that can be processed, and the general wall breaker will make rock sugar, nuts and fruits and other hard ingredients into powder is very easy, so whether it is soybeans, mung beans or black beans, dry beans or wet beans, there is no problem with the filial piety sedan car in the wall breaker.

Brand model: Joyoung wall breaker.

System: Y1<>

The wall breaker can dry the beans, but the dry bean grinding will have a large loss of the wall breaker, which will affect the life of the wall breaker for a long time.

Beans are rich in nutrients, grinding soybean milk with a wall breaker can help the human body supplement the nutrients needed, the reasonable use of the wall breaker can make the machine more durable, and the configured wall breaker can also bring high-quality leakage friend service, and continue to make nutritious and healthy food for the family.

The wall-breaking blender integrates the functions of juicer, soybean milk machine, ice cream machine, food processor, grinder and other products, and completely achieves the multi-purpose function of one machine, which can instantly break the food cell wall and release plant biochemicals. Because the ultra-high speed (more than 22,000 rpm) can instantly break the cell wall of vegetables and fruits, effectively extract plant biochemicals, so as to obtain the reputation of the wall-breaking cooking machine, it is the first choice of home health care and health care household appliances. The latest generation of juice machine is a wall-breaking blender that integrates heating and stirring, which can not only make vegetable juice and smoothies, but also heat and make soybean milk, fish soup, medicinal soup, porridge, etc.

It adopts the technology of breaking the wall at low speed and increasing the torque.

No, the number of revolutions of the wall breaker is very large, and the potatoes are very few, and the number of beans can be broken.

If you put less beans in the wall breaker, they will not be broken or broken, and they will feel very thin when broken.