Apple 8plus is set up with a flash, how can incoming calls not flash

I personally experienced that the LED flashing switch has been restarted countless times, no matter whether the lock screen is locked or not, it will not flash, and I thought that the mobile phone I bought was broken.

The point is, it's possible that the landlord has turned on the Do Not Disturb mode. Do Not Disturb! Do Not Disturb!

Do Not Disturb! That's it for me,iOS11 system,There is a small moon icon next to the battery in the top status bar, it means that your Do Not Disturb mode is turned on,Do Not Disturb mode will not flash when it is turned on。

How to turn off Do Not Disturb mode: 1. Swipe up at the bottom of the screen and turn off Do Not Disturb mode in the control center; 2. Click on the Do Not Disturb mode in the settings, which is the icon of the purple moon, and turn the Do Not Disturb mode off.

After turning off the Do Not Disturb mode, the landlord, you turn on the LED flashing in the auxiliary function, and hit ** to try it for yourself in the lock screen state, if nothing else, it should flash.

First, open your phone's settings.

Then find "Generic".

After that, open General, then swipe down to find the "Accessibility" option.

Then turn on "Accessibility" and swipe down with your finger and find "LED flashing for reminder".

This feature is turned off when the phone is set by default. You just need to turn it on and you're good to go. Slide the key to show it in blue, indicating that its function is turned on.

Now your iphone5s flash will flash when it comes in, but here is a reminder that the iphone5s call flash will also consume much more power than usual when it flashes.

1. When the iPhone call flash is turned on, it is actually to turn on the LED flashing to show the reminder function.

2. Click Settings - General - Accessibility - LED flashes to remind.

3. Click to turn on the function, and the flash prompt will be automatically turned on when the phone calls or receives message notifications.

Here's how to turn off the call flash on your iphone8plus phone:

First, click "Settings" on the desktop of the iphone8plus mobile phone.

2. After entering the settings interface, select the "General" option.

3. After entering the general category, find the "Accessibility" item and click to enter.

Fourth, then select the "LED flashing for reminder" option.

5. After entering, turn off the switches of "LED flashing to remind" and "flashing when muted".

Here's how to turn off the call flash on your iphone8plus phone:

First, click "Settings" on the desktop of the iphone8plus mobile phone.

2. After entering the settings interface, select the "General" option.

3. After entering the general category, find the "Accessibility" item and click to enter.

Fourth, then select the "LED flashing for reminder" option.

5. After entering, turn off the switches of "LED flashing to remind" and "flashing when muted".

Apple 8plus is set up with a flash, how can incoming calls not flash

This function only flashes when the screen is turned off, if it still doesn't work when the screen is off, it is recommended to restart the device and check whether this function is turned on. 1. The iPhone call flash is actually the mobile phone LED flashing to show the reminder function. 2. Click Settings - General - Accessibility - LED flashes to remind you, and click the button behind to turn on.

First, find and open "Settings" from the iPhone desktop, second, find "General" in the settings options, click to enter, third, in the general list, swipe up with your finger. Find "Accessibility", click to enter, and fourth, in Accessibility, swipe up with your finger. Find "LED flashing to remind", and then turn on the switch on the right, when there is ** coming, the iPhone will flash to remind you, the advantage is that it is very individual, especially at night, of course, after turning on the iPhone call flash, the consumption of battery power will be greater than usual.

1. Open the [Camera] app in your iPhone and tap the [Lightning] pattern in the upper left corner of the page; 2. After clicking, three options will pop up: [Auto], [Open] and [Off]. Select [On] to take a photo, and the flash next to the rear lens will turn on; 3. We can also set the [Camera] flash to [Auto], so that in a low-light shooting environment, the Apple camera flash will be automatically turned on.

The flash of the incoming call will only flash when the screen is locked and the screen is closed, if it is unlocked and the screen is unlocked, the incoming call will not flash and shine, if it is not possible in the state of the lock screen and the screen is closed, you can turn the settings on again. The specific steps are as follows:

1. Go to your phone's settings.

2. Select General.

3. Go to Accessibility.

4. Turn on the LED flashing switch.

The reasons are as follows: One The flash function is not working.

2. There is a problem with the hardware.

3. There is a conflict in the installation of third-party software.

Solution: 1. Turn on this function (Settings - General - Accessibility - LED flashing to remind you), this function will only flash when the screen is locked and the screen is closed. Turn on this feature and restart your device.

2. Uninstall third-party software.

3. Overhaul the hardware.

The iPhone 8 Plus phone sets the flash but the call does not flash is caused by the wrong setting.

1. Unlock your iPhone 8 Plus to the home screen and open Settings. 2. Find the [General] function in the detailed list of options in [Settings]. 3. After entering the [General] function menu bar, find and open [Accessibility].

4. Enter the [Accessibility] management settings page, and click the [LED flashing to remind] function. 5. After entering the specific setting of [LED flashing for reminder], click the switch button. 6. After the [LED flashes to remind] function is successfully enabled, the incoming call message will be reminded by flashing in [Silent Mode].

Hope it helps, dear.

Questions. I'll give it a try. Okay, dear.

Settings - General - Accessibility - There is an LED flashing below to remind you to turn it off.

Mine too, sometimes just flash. Sometimes it doesn't flicker.

The temperature is low, and the explanation is that it is not good for the battery, and you can hold it for a few minutes, and so will mine.

Here's how to set up the Apple 8 incoming call flash:

1. Open Settings.

2. Click General.

3. Find the accessibility function and click to enter.

4. Find the LED flashing in the auxiliary function to remind you, turn it on.

Note: 1. After turning on the function, whether it is an incoming call or a text message, the light will flash.

2. Using this function will light up the flash, so it will have a certain impact on the battery life of the phone.

How to set up the flash for incoming calls on the iPhone.

Asking questions still doesn't work.

Turn it off and turn it back on.

Let's see if you can ask questions.

It's OK, thank you.

I hope to kiss and give it a thumbs up.

There are no accessibility features in the general.

1. Open the settings on the desktop of the mobile phone, as shown in the figure below

2. Click on Accessibility, as shown in the figure below

3. Then click Audio Visual, as shown in the figure below

5. Then turn on the flashing when muted, and turn off the flashing when mute when it is off, as shown in the following figure

Turn on your phone, open Settings in turn, tap Accessibility, tap Audio Vision, turn on LED flashing to remind, and you're OK!

Go to Settings. Open the settings on the iPhone and go to the system settings.

Go to the general settings.

After entering the system settings function of the phone, select "General", enter the general function settings, and select Accessibility Functions.

Once you're in the general settings, select "Accessibility" in it.

Tap the LED to flash to show a reminder.

After entering the accessibility function of your phone, find the "LED flashes to alert" and tap to enter.

Here's how to turn off the call flash on your iphone8plus phone:

First, click "Settings" on the desktop of the iphone8plus mobile phone.

2. After entering the settings interface, select the "General" option.

3. After entering the general category, find the "Accessibility" item and click to enter.

Fourth, then select the "LED flashing for reminder" option.

5. After entering, turn off the switches of "LED flashing to remind" and "flashing when muted".