How does the garage floor paint draw the parking line?

First of all, find out what the size standard of the parking space is, and then divide the positions evenly by the size of the overall vacant space, draft it with dark chalk, and then color it with waterproof paint.

Hot melt reflective paints should be used;

Hot melt reflective coating is one of the most widely used road coatings, it is a solid powder coating, in a high temperature melting state.

Under the use of special equipment to coat on the pavement. The product has the advantages of simple construction, strong adhesion, good wear resistance, strong stain resistance, bright color, excellent aging resistance, etc., and has good compressive and impact strength, excellent crack resistance, and is suitable for all kinds of road surfaces.

The standard size of the parking space (refers to the private parking space in the community and garage, and the size of the private parking space): the standard size of the parking space is m * m. The standard size of the parking space is m * 6 m and the inclination angle is 60°.

Garage scribing is generally divided into the following types:

Underground garage marking - hot melt reflective marking parking space parking space size standard m * 5 m m * m hot melt marking parking space practice, parking space fixed point size - pay-off.

Brush the floor with adhesive on the ground.

Interval hot melt machine push line hot melt marking paint is quick-drying type It takes 5-10 minutes in summer to open to traffic and 1 minute to open in winter. Cold paint marking parking space marking - manual painting marking parking space parking space size standard m * 5 m m * m cold paint marking paint practice, parking space orientation fixed point sealing box with tape - paint mixing and thinner (or floor glue under coating) - manual drum cold paint marking takes 30-60 minutes to open to traffic. Epoxy flooring.

Marking the parking space line on the epoxy floor is not advisable to hot melt, because the hot melt practice requires a high temperature of more than 100 degrees. Epoxy flooring is easy to burn, so it is not advisable to use hot-melt markings, only hot-melt cold paint methods Epoxy flooring should be used with tape masking paper.

Masking paper is not easy to remain on epoxy flooring. You can choose the corresponding type according to your own needs, and the above information is provided by Beijing Road.

Powered to provide. It's simple, use an ink fountain first.

Or the ruler is lit up, tape is pasted on both sides, and the width of the tape is left in the middle to be painted! Stick tape on both sides, leaving a strip in the middle as wide as you need.

Open-air parking for small cars: 25 30 sq.m. parking spaces; Indoor parking garage for small cars: 30 35 square meters of parking spaces;

On-street parking strip for small cars: 16 20 square meters of parking spaces; The design principle of the parking lot line size is: not small enough to scrape the car, not too large to waste space, the aisle should be enough for two cars in parallel, and then it can be perpendicular to the road, or it can be at a certain angle with the road in the direction of the opposite direction.

During the construction of the parking lot marking project, if the length of the car is not more than 6 meters and the width of the car is not more than the meter, the spacing between the standard car and the car is not less than meters, and the spacing between the car and the wall and the end of the parking space is not less than meters; If the length of the car is more than 6 meters but not more than 8 meters, the width of the car is greater than meters and not more than meters, and the distance between the cars is not less than meters. The corresponding specification for the carriage return section is to meet the need for a one-time turn of one car, which actually provides different dimensions of loosening for different types of parking lots. Therefore, for the parking lot that is mainly used to park small cars, the size of the parking space is mostly adopted, and the width of the single-lane swing lane is not less than meters, and the double lane is not less than 5 meters.

Markings: Road traffic markings, parking space markings and indication arrows are painted with special markings. Paint film thickness: ; Non-stick tire drying time: <5min; Appearance: The coating is white and distinct, resistant to sun and temperature differences, does not change color, and has strong reflectivity at night.

Traffic markings are safety facilities composed of pavement markings, arrows, words, façade markings and curb line contour markings, etc., which are used to control and guide traffic. The parking lot is equipped with a parking space line, a guide arrow, a passage edge line and a no-parking yellow line area. Parking Lines:

The size is 2500x5000mm, the line width is 150mm, and the color is white. Guide arrow: length is 3000mm, color is white.

Channel edge line: The specification is a single solid line and a single dotted line, the line width is 150mm, and the color is white. No-parking yellow line area:

The line width is 150mm, and the color is yellow.

Hello, the parking space marking paint stove is the royal elimination method: 1. Paint black. On the basis of the scribing paint, apply black paint covering, which can only be solved temporarily.

2. Grinding machine cutting. Use a grinding machine to remove the paint of the parking space, which is a clean way of removing the line of the hidden rock, but it is easy to damage the road surface. 3. Sandblasting.

This method can completely remove the marking paint without damaging the road surface, but the cost is large. 4. The use of thinner cleaning, this method can only make the color of the marking paint fade, and can not completely remove the thinner components for thinner, solvent oil, so when using this method, special attention should be paid to fire prevention. I hope it can help you, remember to help me like it, thank you.

Parking spaces are generally drawn with special road markings. Road marking paint is a one-component fast-drying paint, normal temperature construction, room temperature drying, with wear-resistant, pressure-resistant, light-resistant characteristics, can be used as road marking paint, pavement marking paint, cement surface marking paint, garage marking paint, floor marking paint.

Road reflective marking paint is a small-grain powder paint synthesized by using foreign high-quality resins, pigments, aggregates, additives and other chemical materials. The coating is heated into a melt at a suitable temperature, which can form a thick film, which is bright in color, recognizable, and has excellent reflective effect at night. Good construction performance, fast drying, strong adhesion, good wear resistance and durability, suitable for coating asphalt, concrete and other pavement.

It is especially suitable for coating urban roads that require fast drying.

It is used as a sign and marking for highways.

Underground parking lot floor paint engineering construction plan:

1. Cylindrical treatment.

In order to increase the eye-catching nature of the column surface of the parking lot and avoid hitting the column due to reversing, the lower end of the column can be marked with yellow and white twill zebra crossings below the meter.

2. Anti-slip floor paint for vehicle entrance and exit ramps.

Vehicle access products must have anti-skid effect, some parking lot floor paint construction has been taken into account, the construction of the corrugated uneven ground, in this case only a part of the car passage color, a part of the color of another color, the two colors can be alternate.

If the anti-skid requirements are not considered in the design of civil engineering, the anti-skid floor paint should be used here in the construction of the parking lot floor paint, and the anti-slip aggregate diameter should be larger, usually not less than 2mm in diameter, depending on the slope of the ramp and select the appropriate diameter of the anti-skid aggregate.

3. Wall skirt treatment.

The wall skirt is painted in a different color from the wall and floor, which can serve as a reminder when driving. But it should not be too high, generally rice. It is marked in dark green and light gray.

4. Parking space number.

Parking spaces should be numbered, the number can be divided into C01-Cxx, B01-Bxx, A01-Axx according to the region, in which the unlucky number can be omitted (such as etc.), the numbering font can be used in yellow or white, and the font size format can be 1000-1200 in bold font is more appropriate.

5. Parking area.

For the flat floor, ordinary epoxy floor paint can be used, and the ground with poor flatness and surface strength can be used epoxy mortar floor paint, and the color of epoxy self-leveling floor paint can be designed as gray for advanced requirements.

6. Carriage passage.

Due to the frequent traffic, relative to the parking area, the design should be strengthened, epoxy mortar floor paint or epoxy self-leveling floor paint can be used, the color is usually green, the width of the road passage is set according to the site situation, usually the two-way traffic lane should not be less than 6 meters, the one-way traffic lane should not be less than 3 meters, the pedestrian passage is meters, the yellow sign line is drawn on both sides of the channel, and the line width is 8-12mm.

7. Dealer signs.

Yellow or white sign paint (night flower floor paint can be used) can be used in the passage to draw arrows to indicate the direction of traffic and point to each parking area, such as A parking area, B parking area and C parking area.

8. Parking space setting.

Parking spaces are set up according to the structure of the parking lot floor paint ground area, and the car can usually be designed as m x 5-6 m, and the parking space is drawn with yellow or white sign lines, and the width of the marking line is 8-12mm.

1. Ground grinding: Use a grinder to polish and level the parts of the ground such as cement slag above the ground to remove the ground ash. Other treatment measures are used for loose and oily ground.

2. Primer: After the concrete substrate is processed and cleaned, the primer (roller coating or brushing) can be carried out, and the roller coating or brushing should be even.

Uniform, consistent thickness. The primer has a certain water vapor permeability, which can enhance the strength of the substrate and increase the adhesion of the coating to the substrate.

3. Intermediate coating: Quartz sand and quartz powder are added to the prepared water-based epoxy coating (intermediate coating) to form a water-based epoxy mortar, and it is evenly coated with a trowel to increase the thickness and compressive strength of the coating.

4. Batch supplement: After the middle coating, the floor is polished with sandpaper, and the putty composed of water-based epoxy paint (medium coating) and quartz powder is constructed according to the actual needs, and it is required to be smooth and no holes, and there is no batch of knife marks and sanding marks.

5. Putty batch supplement: the use of primal coating materials is deployed according to the proportioning method of primal coating materials, and the surface can be directly coated in polishing without adding water.

layer is scraped onto the layer. If necessary, you can appropriately add finer quartz powder or heavy calcium powder to make up, and polish it as a whole with fine sand disc paper after the batch is finished, and the reference amount of the material is supplemented.

6. Topcoating: Applying the water-based epoxy floor coating to the surface coating, the surface coating roller coating is applied twice, and the overall ground gloss is required to be soft, clean and uniform after completion.

1. No empty drums.

7. Maintenance: It takes 24 hours for the surface layer to be dry, and it should be closed during this period, so as not to affect the clean and smooth effect of the surface. 3D can be uploaded.

people, 7 days after the completion of maintenance can be officially put into use (25 shall prevail, low temperature needs to be moderately extended).

Underground parking lot floor paint construction technology:

The foundation ground is polished and cleaned with a dust-free grinder;

Apply the penetrating primer, the amount of coating should be sufficient, and the middle coating should be applied after it is completely cured;

Solvent-free middle coating and quartz sand are mixed and stirred evenly and scraped together, brushed according to the demand, and the putty layer is finely polished and brushed after complete curing;

Solvent-free middle coating and quartz powder are mixed and stirred evenly and scraped together as a whole for dust sealing;

Finally, the top coat is applied, and a solvent-free epoxy topcoat is applied as a whole, and the overall color is uniform. It should be noted here that the garage floor parking spaces and passages are of different colors, which need to be done separately, and finally the line drawing and traffic facilities are installed.

Garage floor paint.

Garage floor paint can also be called underground parking lot floor, parking lot floor paint, parking lot floor paint, parking lot anti-slip, wear-resistant floor paint, parking lot wear-resistant floor and wear-resistant floor, etc. Garage floor paint according to the use of different requirements, can be divided into orange anti-slip floor, mild anti-slip floor and high anti-slip floor, generally choose epoxy floor paint series of epoxy mortar thin floor paint.

Construction steps of garage floor paint:

Basic epoxy flooring: base surface treatment (uneven ground needs to be polished) - primer batch hanging putty - fine grinding dust removal - epoxy surface coating.

Epoxy mortar steps: base surface cleaning and grinding - brushing primer - scraping mortar layer - scraping putty layer - fine grinding and dust removal - epoxy surface coating.

Garage floor paint construction technology:

1. Base surface treatment: grinding and cleaning, the base surface is required to be dry, smooth and without hollowing;

2. Brush the primer: close the base surface and enhance the adhesion;

3. Batch scraping mortar: increase the compression resistance of the ground;

4. Batch scraping putty: close the mortar layer to make the mortar layer smooth and free of hollowing;

5. Roller brush epoxy topcoat, can also spray topcoat or surface layer for anti-slip process.

Garage floor paint is generally suitable for factories, schools, hotels, hospitals, office buildings, residential quarters, shopping malls and buildings and other ground and underground parking lot floors. As well as parking lots and ramps, roads and bridges, sidewalks, swimming pools, auto repair shops, garages, food factories, large parking lots and other grounds.

Ningbo Wanfeng Company specializes in the construction of concrete sealing curing agent. It integrates the production, sales and engineering construction of new flooring and wall materials. At the same time, it has the national decoration level 2 and sports level 2 construction qualification. There are also many engineering cases. Complete cases, full reputation, quality assurance.

Summary. No, you cannot.

The advantages of flooring are dustproof, variety of colors, and seamless texture. The disadvantage is that it is easy to age, the ground is easy to peel off and peel after being wet, and the wear resistance of the underground garage floor constructed with epoxy is poor, and it is easy to leave unsightly drag marks after the car is rolled and it is not easy to clean.

Can the floor paint be used to mark parking spaces?

No, the advantages of flooring are dustproof, diverse colors, and seamless texture. The disadvantage is that it is easy to age, easy to peel and peel after the ground is wet, and the underground garage floor with epoxy construction has poor wear resistance, and it is easy to leave drag marks that are difficult to call the state after rolling and it is not easy to clean the cherry blossoms.

Generally, special road marking paint is used, which has the advantages of good wear resistance, pressure resistance, and not easy aging.

If the above answers are helpful to you, remember to like them<>

Thanks <>