The gas stove can be lit, but the gas is not out only a brief snort sound, and the device does no

The plastic box you said should be an igniter, the outside iron is insulated, your ignition has been playing because it is a delayed ignition device, press it to play for a while, but it should be a problem with the assembly or a problem of flame-out protection, it is two stove eyes, is it the same problem on both sides, it is really hard to say if you don't see it.

Please make it clear whether it is a gas tank or a gas pipeline.

Then describe the status of the problem.

Finally, to be clear, the layout of the pipes.

Otherwise, this question is very difficult to answer. Because when it comes to security.

Serious. Don't just say it.

You can find a professional in property maintenance, or a professional repairer from a gas company (if it's a pipeline). Don't make it yourself. In case of air leakage, not only the safety of your own home is a hidden danger, but the entire building may cause dangerous ......

Be careful with that.

Let me tell you about it, the problem you said is tempering, and the deflagration has a certain reason for air leakage: first check whether the air valve is blocked, and whether the entire gas path is leaking, smear it with soapy water, bubbling indicates air leakage, but I don't think the probability of air leakage is very large. As for igniting and extinguishing the fire, it may be that the induction needle is not burned by the fire and cannot be sensed and the flame is extinguished.

You can see whether the air hole corresponding to the induction needle is blocked, whether the damper is adjusted to the best position, whether the discharge position is correct, and whether the battery is dead! Another important point is to see if your stove has a solenoid valve, if there is a high probability that the solenoid valve is bad, the igniter is still there, but the problem you said is still more complicated, it is recommended to ask professional maintenance personnel to check, do not repair yourself, so as not to cause safety hazards to yourself or others.

The lines are clogged, or there is no gas.

Ignition needle problem (this is the case in my house).

In the middle of the gas stove there is a small vertical fitting, this is the ignition needle, if the ignition needle is not discharged, it can not lead to the flame, which will cause the gas stove not to ignite.

The position of the ignition needle is offset, and the distance between the ignition needle and the inner flame cover is far away, under normal circumstances, the distance between the ignition needle and the fire cover is about 4-6mm, if the ignition needle is found to be in the wrong position, it will be straightened and then try to lighten.

The ignition needle is covered with oil, which affects the temperature transfer, and at this time, it will ignite but extinguish as soon as you let go. Check to see if the ignition needle is clean and clean, clean up the covered oil, and then light the fire to see.

There is a problem with the battery.

If it's not the ignition needle, then see if the battery is dead or loose. Where is the battery? Turn the gas stove over, a small box at the bottom is where the battery is placed, replace the new battery and see if it can catch fire!

Split fire cover problem.

If the above two places are fine, then look at the fire distribution cover of the gas stove, it may be that the small hole of the fire distribution cover is blocked, which will also cause the gas stove to not catch fire.

What you need to do is: remove the fire lid, and then poke the small holes with a sharper object (needles, toothpicks), and then try to light the fire, and clean these small holes more often when you use them.

Most of the gas stove can't catch fire is caused by these three points, in fact, the problem is not big, you can solve it by yourself, and you don't need to spend money to find a master to repair it. So remember! In the future, if there is a similar situation at home, don't rush to ask the master, check these places yourself to see if there is any problem.

Dear, hello, I've seen your question, please wait three minutes, I need to sort out the answer.

1.First consider whether the battery has electricity, and when it is found that it is not ignited, it is necessary to check whether the battery has electricity, if not, you only need to replace the ordinary No. 1 battery, 2Poor circuit contact, mainly to check whether the positive and negative poles of the battery box are rusty, whether the line has poor contact, if so, the rust needs to be removed, 3The ignition needle is dirty or the ignition needle is not properly positioned, you need to clean the ignition needle or adjust the distance between the ignition needle and the fire cover, 4The high-voltage package is damaged or the high-voltage line is aging.

I'm a maintenance worker, and if both can't catch fire, if the battery is replaced with a new one, that is, the power cord in the furnace is broken, and the judgment is complete.

One side of the two stoves does not come to gas, no light, lighters and micro switches are replaced with new ones, or so, if the side that is played first, the bad one will be gas, but not fire.

Hello, may I ask if my gas stove started to have a fire, and after a while, it stopped burning, and how many times did it sound? Do you know what the reason is?

It is possible that the battery is out of charge, so it can be ignited at first, but it burns for a while and then goes outTry replacing it with a new battery. If the battery is replaced, it is still out of the townIn the case of fire, it is possible that the flame is equipped with a feedback needle that burns to the fire. The feedback needle is |Safety protection equipment, mainly used to detect whether there is a collapse attack.

If after ignition, the burning position can not reach the feedback needle, it will automatically cut off the gas, and there is a way to maintain normal combustion.

Neither of the gas stoves is lit What is going on with gas and no ignition sound.

The battery of the gas stove is insufficient to push the pulse igniter to work, so naturally there will be no high pressure generation, so it will not ignite or hear the sound of ignition; The battery power supply line is open or virtually connected, resulting in the power supply abnormal opening and shielding often do not ignite; damage to the pulse igniter of the gas stove; The ignition needle is detached from the high-voltage wire; Partial aging or damage of high-voltage lines and short circuit of the shell; If the solenoid valve is damaged and the ignition needle is too far away from the metal of the burner, it will also cause the ignition sound to be lit and not heard.

Kiss, good evening The gas stove is a little on fire and the reasons for the calm energy include the following: 1Line Failure:

Gas stoves need power to ignite, and if the circuit fails, it will cause the ignition function to fail. 2.Clogged nozzle:

The fire nozzle of a gas stove may become clogged with grease or other substances, causing ignition failure. It is advisable to clean the fire nozzle. 3.

Gas line leakage: If there is a leak in the gas line, it will cause the gas to not reach the fire nozzle smoothly and thus not ignite. It is recommended to close the main gas valve and have it checked and repaired by a professional.

4.Spark plug damage: The igniter ignites the gas by generating a spark, and if the spark plug is damaged, it will cause the ignition to fail.

It is recommended to replace the igniter with a new one. The above are the common reasons for the non-combustion, which needs to be comprehensively analyzed according to the actual situation on site.