The water pressure in the old community is very low, how to choose the right booster pump?

This situation is in the old neighborhood.

It is very common that the water pressure above the fifth floor is very small, and there is basically no water available during the peak water consumption period, which is basically a rapid urban development and a residential area.

More and more, the urban population continues to grow, and the pressurization equipment and urban pre-buried pipelines of the water division have not increased or increased with the increase of urban population; Natural water supply is generally 1-6, there will be 7 floors in the old city, this is the old house, more than ten years ago the water supply problem is not big, with more and more new communities around, the water supply pipeline is aging, resulting in insufficient water supply, this situation can only be pinned on the property to concentrate on the transformation of the entire community pipe network and pressurization.

<> can only wait for the demolition to build a reservoir on the top floor.

There is a mezzanine that can be built in the mezzanine and the reservoir uses the original inlet pipe, and the layer uses the water from the cistern! It can solve the water use of the high-rise without affecting the use of the bottom! In this way, the pressure problem can be well solved, if the pressure is not ideal, add a booster pump.

My previous house was not under enough pressure, but later it was changed like this, and the water pressure was not enough! First, because in the current rural areas, such as using some domestic water or washing some things, this is indispensable, but many rural families do delay their normal drinking water because of some external influences for some things that store water or obtain water resources through air pressure.

Now the conditions in the countryside are getting better and better, all of them have built buildings and even villas, and there are no conditions to use tap water, so they have their own wells and installed water supply devices, but because the rural floors are not very high, sometimes the water pressure can not meet our requirements, at this time the booster pump and pressure tank appear in front of everyone. I think there are two main categories of rural domestic water, one is an independent household, using well water, and in this case, arbitrarily speaking, submersible pumps.

The pressurized tank is the best, of course, some will choose other types of pumps, this is not the point, this depends on the water intake, do not go into details.

A gas-liquid booster pump can be selected. The gas booster pump B series is a two-stage booster pump, which can increase the gas at very low pressure to a very high pressure, driving the air pressure of 7 bar, and can be increased to a maximum of 640MPa. The reversing method of this series of pumps is exactly the same as that of the Adecco G series, which can produce twice the output pressure at the same air drive pressure, and the whole pump is made of aluminum alloy and stainless steel.

You can choose a pump with a strong size according to the range of use, if the range of use is small, buy a smaller pressure, and buy a stronger pressure if the range of use is large.

According to the diameter and model of the pipe, you should choose a product that suits you, and the pressure should be particularly high.

The decoration Da Cui helped the owner choose the booster pump, and the original water pressure problem was solved, hoping to help you in the decoration.

First of all, it is necessary to distinguish the performance of the product from good to bad, and secondly, to have a perfect understanding of the product, and to calculate the specific Yang Cheng.

Later the property installed a water tank in the underground garage and it was slightly better. Before the water tank was installed, the water pressure of the old watch house in the next building was very small all day, due to the low floor, and there was no secondary pressurization, and then the old table installed a booster pump, and the water was basically solved. Installing a booster pump can effectively solve the problem of low water pressure (if the water pressure is too low to reach your floor, the booster pump will not work).

In 2020, Zhumadian City approved the water plant and water supply network renovation project. It is hoped that the water supply problem in Zhumadian will be gradually solved in the future.

<> If the pressure of the faucet at home is too small, you can install a small power booster pump, the ordinary self-priming pump is noisy, and there is a variable frequency silent pump on the Internet, which is higher, but the pressure is adjustable and the noise is small. Zhumadian has been seriously drought recently, it is useless to add those things, my family has added, can not pump up the water, a lot of re-drilling wells do not have much water, now only the next heavy rain can be alleviated, (rural self-drilled wells) pipeline connection should be tight, especially the inlet pipeline can not leak air otherwise it will reduce the head of the pump or can not pump water. Before the pump chamber is filled with water, do not rotate for a long time to avoid damaging the seals.

It is specified to be installed, and it needs to be installed above the 5th floor, and now the water pressure is too low, and you can't take a bath without installationBecause there are almost no other ways to pressurize indoor tap water. Therefore, it is also recommended that you install a water pipeline pressurized pump to solve the problem of low pressure. Personally, I suggest that you can follow the steps below to deal with it.

We live on the third floor, and the bath at night is boiling water, and I can't stand to install a booster pump like my sister's house on Zhonghua Road, a set on the fifth floor, but it usually does not affect the water, so it is not installed. There is also a set of her father-in-law's set in a community on Fuqiang Road, also on the fifth floor, and a booster pump is installed, otherwise the water will not go. It depends on your own situation.

Especially in the north, the state has also introduced many policies and measures, such as the South-to-North Water Diversion Project. Water is one of the most basic substances for human survival, it is not inexhaustible, we must cherish water resources as we cherish life.

Of course, it is possible, the booster pump, as the name suggests, is a pump used for pressurization, and its main uses are water heater pressurization, low water pressure in high-rise buildings, sauna bathing, bathing and other pressurization, pressurization of insufficient water pressure on the top floor of the apartment, solar automatic pressurization, reverse osmosis water purifier pressurization, etc.

The water pressure in the high-rise households is not enough, and a booster pump needs to be installed. Nowadays, many residential areas living in high-rise owners will install booster pumps, which can divert water from low to high places, effectively helping to solve the problem of low water pressure in the home. As long as the switch is turned on at night during peak water consumption period, the water pressure will not be very low, and it is enough to turn it off when it is used up.

The first is the booster pump, if the water in the water pipe is lower than the water flow rate in the pump or exceeds the water flow rate in the pump, the effect of pressurization will be worse. The second is the pressure tank, its disadvantage is that the noise is relatively large, it is particularly noisy at home, some people will pad some old tire plates under the pressure tank or install it in the yard, which can alleviate some noise.

Question: I live on the 6th floor, the water meter is on the 1st floor, is the booster pump installed on the 6th floor at home, or is it more effective to install it on the first floor watch?

I live on the 6th floor, the water meter is on the first floor, is the booster pump installed on the 6th floor at home, or is it more effective to install it on the water meter on the first floor?

It will be effective on the first floor.

There will be no noise like this.

This is not needed, because when decorating the home, the real estate has already taken these problems into account, and they will solve them well.

Yes, because this can also make the water flow larger, and it will not be very slow because of the high floor, which is also a very convenient behavior, and it can be used to install one.

You can install a booster pump in your home, so that you can use water very quickly, and there will be no such inadequacy happening.

You can choose a household booster pump, which is installed in the main inlet pipe at home, as for the brand, you can look at Grundfos, Wilo, and Standy, which are all better brands of household booster pumps. Household booster pumps are generally installed at the tap water nozzle of the home, and the booster pump model selected is different according to the diameter of the pipeline. It is recommended to choose a home booster pump, which is energy-saving and environmentally friendly, and the brand can choose German Wilo, Denmark Grundfos, etc.

If you <> install it at home, you can consider these Grundfos, Wilo, and Standy are all low-noise, and it is good to buy them online, and you can also check with their customer service about the situation. There is also a kind of pressurization is the so-called German LUV current limiting technology, in fact, to put it bluntly, it is also to limit the amount of water, but there will be multiple gears to meet the needs of users with different pressures, one of which is also a fine hole water, the lowest pressure can be used, and there are two small water pressure, if the booster pump is installed, we can install the booster pump on the water inlet pipe at home, so that the water pressure in the whole home can be higher.

Generally speaking, if the water company needs to install a booster pump for water supply, it can only be installed behind the water meter if it needs to be pressurized in the whole house, and the pressurization is directly used for the whole building after the water meter. If you only need a single layer of pressurization or water heater boosting, you need to install it in the basement or other places relatively close to the ground, because there is a special place for the booster pump. Since the higher the house, the lower the water pressure, the choice of water pump depends on the head and flow.

A water booster pump for home use can be installed behind your own water meter. It is subject to the fact that the tap water can flow directly to the pump body. Suppress and relieve pressure.

For example, the water purifier is suitable for water pressure of 1kg, especially the reverse osmosis water purifier, its RO membrane is very fine, and the water can only pass under strong pressure, if the water pressure is too low, a large amount of waste water will be generated. For example, the storage type electric water heater is generally started.

It is better to install it in the bathroom, because the water pressure of the bathroom shower is high, and it will be more comfortable to take a bath.

The water pressure at home is relatively low, so you must install a booster pump, so that it will be smoother to practice, and the installation position must be installed in the water inlet supervisor, so that the water in the whole home will be under pressure.

The household booster pump is installed in the place of the main water inlet pipe, and can be installed in the water meter pipe well, so as to ensure that the water pipe begins to play the role of pressurization from behind the water meter, and the water pressure at any position in the home will not be a problem, and it does not occupy any position in the room, which is more convenient to use and save space.

As the saying goes, "water flows downward", and the wisdom of the ancients has long told us that we are affected by the gravitational pull of the earth.

The water does not flow to a higher place, but to a lower place. The upper floors need to transport water from the ground to the upper floors, and there is a lot of resistance in this process, so the higher the floors, the lower the water pressure. If the water pressure in the upper floors is insufficient, you can choose to install a booster pump.

This can effectively improve the problem of low water pressure in the home, but this process will have a certain impact on the families on the lower floors.

This is because the booster pump sucks water through a vacuum, which causes a local water pressure imbalance that affects the water used on the lower floors. This principle is very simple to understand, that is, usually the total amount of water in the pipeline is certain, the installation of the booster pump in the home water flow increases, the water pressure in the pipe to achieve balance, at this time the water flow in the lower floors will automatically decrease.

So, how to meet the water pressure of high-rise residents without affecting the water supply of low-rise users?

At this time, high-rise buildings.

The community often adopts the method of secondary pressurization to increase the water pressure to meet the needs of high-rise residences.

The water needs of the owners. If the low-rise users do use the booster pump because the water pressure is too small, then they can report to the property or the water company, and it is not recommended that the low-rise follow the booster pump on the water pipe without authorization. According to the relevant provisions of the water supply regulations, it is forbidden to install pumps on the water supply pipes to pump water, and if it is violated, it will be punished or warned.

At the same time, for users on high floors, it is important to know that low water pressure will cause less water flow in the home, but this is not the only reason. If the water flow is much smaller, it is also related to whether the equipment of the water plant is advanced. If the faucet and other equipment are not clear for a long time, there are many scale impurities in it, which will also affect the water flow.

For such cases, it is recommended that you choose to use white vinegar to clean the faucet.

In order to make it convenient for everyone in the same community to use water, it is recommended that you do not use water during peak hours, which can easily lead to insufficient water supply, such as cooking and bathing in advance!

High floors because of the height, if the ground water pressure is not enough. High floors are prone to water shortages, so high floors need pressurized water supply, and generally speaking, the use of booster pumps will not affect lower floors.

Because the height of the upper floors is very high, the water does not go to the water, so the water pressure is low. It will have an impact, so we must not use it, and don't be too selfish.

Because the floor is very high, the water pressure cannot go up, so the water pressure is very small. There is no effect, so we can use it.

Insufficient water pressure in general homes, villas and other occasions? The first thing that came to mind was to repressurize the tap water. However, how to pressurize so as not to fall into various small problems, such as frequent restarts, hot motors, loud noise, unstable water pressure, and hot water heater water discharge, easy to break.

Naichuan Automation specializes in the sales of inverter automatic booster pumps, one-time for you to solve all kinds of small problems, the purchase of products is to enjoy the benefits of the product, rather than to find trouble for yourself.

General home booster pump option.

The general household water consumption is relatively small, the household water inlet pipe is DN20 or DN15 and other specifications of the pipe, only need to use the inlet and outlet of the inlet and outlet of G1 (inch inch) of the frequency conversion automatic booster pump can solve various problems, generally only need the power for the flow of the corresponding pressure of 2 kg) or the flow of the corresponding pressure of the inverter automatic booster pump. Connect the device to the official road where the water meter comes out, plug it in, and you can use it. If you turn the faucet to a very small point, the booster pump is only in a low-speed and slow-running state (the general differential pressure automatic booster pump no matter how much water you use, as long as it reaches the start-up condition, it is a full-load high-speed operation), which can not only stabilize the pressure, but also play a role in energy saving and noise reduction.

That's why many people choose inverter water pumps for boosting.

Villas or detached small buildings are pressurized with tap water.

Compared with the general household water, the villa uses a relatively large amount of water, and the general municipal water supply pipe may be distributed to 25mm. Under normal circumstances, the ordinary inverter booster pump can fully meet the water consumption, but under some conditions, the inverter automatic booster pump used in the general household may not be able to meet the peak water consumption in villas and other occasions. In this case, the outlet pressure of the pump needs to be increased, which must be met by using Wilo and Grundfos inverter booster pumps.

If you turn the faucet to a very small point, the booster pump is only in a low-speed and slow-running state (the general differential pressure automatic booster pump no matter how much water you use, as long as it reaches the start-up condition, it is a full-load high-speed operation), which can not only stabilize the pressure, but also play a role in energy saving and noise reduction. That's why many people choose inverter water pumps for boosting.