What do you need to modify for a newly bought ordinary table tennis racket?

1. First of all, we must choose what kind of rubber to change, to choose a rubber suitable for their own way of playing, if you go to the store to buy rubber, it is simple, just carry the racket to go, the seller in the store can help remove the original rubber, and then replace the new rubber.

2, the first time to paste the rubber or to the store to let the professional to get it, expensive than the online buy rubber is a little more expensive, but convenient, paste once, next time you can buy your own paste online, if the landlord's shot is a finished product, the first time to remove the rubber is very difficult, and, their own rubber to buy professional glue, and rolling glue sticks, as well as the postage of online shopping, and the physical store is about the same.

3. Glue filling is to repeatedly brush the sponge on the rubber with glue when pasting the glue, the sponge absorbs the glue and expands, and then sticks it to the base plate, so that the rubber performance is better, but the glue is very troublesome, and amateur players can not always take off the rubber every time they play, and the glue is also harmful to the body.

Ordinary table tennis rackets can also be replaced with rubber, but the rubber is quite expensive, and the finished racket is only about 100 yuan, and the rubber is even higher. So I think that if your racket is too ordinary, such as a racket of dozens of dollars, there is no need to change the rubber at all, which is a waste of rubber. And the performance of a good rubber can't be played, so there's no need to change, you have to buy a base plate of hundreds of dollars, and then match the same rubber!!

Of course, you can, the table tennis racket can be changed with rubber.

It's just that for ordinary table tennis rackets, there can be a problem with changing the rubber. It is easy to draw the wire when tearing off the old rubber, because the ordinary table tennis bottom plate may not be of good quality and has not been treated, and when the old rubber is torn off, it is easy to tear the bottom plate.

Ordinary table tennis rackets can be changed with rubber1.First of all, you have to choose what kind of rubber you want to change. You should choose an eraser that suits your playing style.

If you're going to the store to buy rubber, it's easy. Let's go with a beat. The seller in the store can help you peel off the original glue and replace it with a new one.

2.It's better to go to the store and let a professional do it. A little more expensive than buying rubber online, but convenient.

Post it once first, and then buy it yourself next time. If the landlord's paddle is a finished product, it is difficult to remove the glue for the first time. And you have to buy professional glue, rubber rollers, online free shipping, and physical stores.

3.Pouring glue is to repeatedly brush the sponge on the glue when sticking the glue. The sponge absorbs the rubber and expands, and then sticks to the bottom plate, so that the rubber has better performance. However, potting is troublesome. Amateurs can't peel off the rubber every time they play, and glue is harmful to health.

It can also be exchanged. However, it is strongly not recommended, because buying a piece of rubber is far more expensive than your ordinary racket, and it is better to buy another pair of ordinary rackets to continue to use.

There is no need to change the rubber for ordinary table tennis rackets, and the original rubber is very suitable for ordinary people.

It can be exchanged. However, it should be noted that the total thickness of the adhesive of the rubber must not be less than 4 mm, and the two sides of the rubber must be bright red on one side and dark black on the other.

Rubber is a kind of glue that sticks to the bottom plate of table tennis rackets, and now the rubber is not directly glued to the bottom plate, but covered with a sponge, and the rubber and sponge are collectively referred to as the rubber.

Positive rubber is also called short particle rubber, characterized by good elasticity, fast speed, stable hitting, no turning, suitable for near the fast attack, especially the left push and right attack type of play, is one of the most commonly used rubber shed types of straight board fast attack players, if you feel that your wrist movements are flexible, and the strength of the arms and waist and abdomen is not enough, it is best to choose the positive rubber racket to win with speed.

The characteristics of the anti-rubber rubber are strong rotation force, stable hitting and easy control, and it is suitable for arc circle type or arc circle combined with fast attack type play. It is also the preferred type for beginners due to its stable hitting and good ball control. The anti-rubber sponge rubber is the most commonly used rubber for straight and horizontal shooting players, because this rubber skin can better take into account the requirements of speed and rotation.

Under the condition of ensuring that you are satisfied with the ball feeling, try to choose a racket with a large elasticity. For example, if a person has a good sense of hitting the ball and uses his hitting skills well, but the lethality of hitting the ball is not very sufficient, so he can choose a more elastic racket to strengthen his speed and improve his lethality to maintain a high level of skill.

2. The soft and hard of the racket and the sponge complement each other.

Here are two examples:

One is the arc circle play, usually using a high elastic soft bottom plate, which can provide strong rotation and speed after leaving the stage through the deformation of the bottom plate itself, usually using hard sea surface and soft rubber to match, in this combination can play both rotation and speed of the arc ball.

The second is the fast attack play, the near Taiwan fast attack players can choose a hard bottom plate and a softer sea surface, which can make the ball improve the speed of the board and the best speed, and it is easier to reflect the rhythm and speed of the positive glue near the fast attack. Of course, it is also possible to choose anti-glue if you are close to the fast attack, but note that the sponge should also be slightly softer than the arc circle play.

Depending on your budget and playing style, the following configurations are recommended:

1.Entry-level configuration, you can learn, master, and consolidate your table tennis skills. Its configuration is as follows: Galaxy N10 baseplate +729 universal two-sided. Although it is cheap, it is cost-effective and suitable for novices.

2.Kuaihu configuration. Galaxy N4 baseplate +729-2+729 Sky Wing.

3. Fast attack configuration. Shoot Leo TNT or Galaxy N4 baseplate +729-802+729 Skywing.

2. a base plate. The structure of the baseplate, the thickness of the carbon, the size of the elasticity, and the control of the weight are all very important, and choosing a suitable baseplate for yourself is the first step in DIY rackets.

3. a protective belt. The strap can effectively prevent the damage caused by the racket hitting the table, but there is weight, it will affect the feel, if the hand feeling is pursued, there is no need to stick the belt, but if you are just a novice, or honestly stick the belt.

4. Glue. It is divided into inorganic glue and organic glue, and choosing the right glue can increase the feel more.

5. Utility knife. A utility knife is used to cut off excess rubber after the adhesive and is essential, and if the blade is too dull, the blade can be made smoother by knocking the blade.

We hope you find it helpful

Ask questions can give some specific configurations, about 300, horizontal row, like backhand, pull want to be bigger.

You can give some specific configurations, about 300, horizontal row, like backhand, pull force wants to be bigger.

Hello, this is based on your personal preference to choose, I personally prefer to use the Galaxy series baseplate, good quality and low price, clear feel, powerful hitting, very suitable for cultivating the feel, conducive to mastering new technology. It is recommended to use 729 sets of glue for rubber sets, which are not high, very affordable, and cost-effective.

Ask yourself if there will be any waste when you do the shooting, and what should you pay attention to?

Will there be a situation of scrapping if you do it yourself, and what should you pay attention to?

Answer that you don't do bad one is inexperienced hahaha, you just follow the online tutorial, the general store sends the tutorial, what you need to pay attention to is to cut the glue clean and beautiful, look comfortable and play.

Ask why you want to make a better shot than a finished one.

Why is it better to shoot yourself than to shoot the finished product?

Ask yourself if it's better to go to a physical store to make your own rackets.

Is it better to go to a physical store to make your own rackets?

Buy a board, it is recommended to buy a straight board without carbon is pure wood, horizontal board to buy carbon, and then according to their own hair selection rubber, it is best to use a set of glue, personally think that Soar 2 is better (forehand), the reverse side with g555 is better, and then glue and, it is best to have a cylindrical thing, directly roll the rubber and the board to stick up, so that there will be no bubbles, it is worth noting that the adhesion process can not be too strong, so not only can not stick well, but will deform the sponge of the rubber.

You can assemble one by yourself, you must have a base plate, sponge, rubber and rubber water, when the rubber and sponge are glued, both sides should be coated with rubber water, and when the air is almost dry, stick it and press it lightly, remember not to use too hard, otherwise it will damage the rubber.

Just follow the step-by-step instructions on the manual. The key is not to apply the glue so hard, otherwise, it will backfire.

First, according to the style of play, technical ability and economic conditions to choose the base.

2. Select the appropriate rubber according to the bottom plate.

3. Glue the bottom plate. The bonding method is as follows:

1. Unpack the rubber cover first, and place the sponge side up on the table.

2. Pour an appropriate amount of inorganic glue on the sponge.

3. Use a glue brush to spread the glue on the sponge evenly.

4. Apply an even glue to the bottom plate.

5. Wait for the sponge and the glue on the bottom plate to dry (touch the sponge with the back of your hand and the bottom plate will not feel sticky).

6. Glue the sleeve glue to the bottom plate, and then roll it a few times with a rubber roller.

The best thing to do is to go and buy one.