The working principle of the wheel bucket sand washing machine, the working principle of the wheel b

Wheel bucket sand washing machine is a kind of production equipment used with sand making machine, sand and gravel aggregate after the processing of the sand making machine contains stone powder, dust and other impurities, wheel bucket sand washing machine can wash off the impurities on the surface of sand and gravel aggregate, improve the quality of sand and gravel aggregate. At present, the wheel bucket sand washing machine can be widely used in the material cleaning of sand and gravel factories, construction sites, hydropower plants and other industries.

When the wheel bucket sand washing machine is working, the motor drives the impeller to rotate slowly after deceleration through the gear, reducer and V-belt, and the sand and gravel aggregate enters the washing tank through the feeder, and rolls and grinds each other under the drive of the impeller, which can not only remove the impurities covered by the surface of the sand and gravel, but also destroy the water vapor layer covered by the surface of the sand and gravel, which is conducive to dehydration.

In the cleaning process, a strong water flow is formed by adding water, which can discharge foreign matter and impurities with small specific gravity from the outlet tank, and the clean sand and gravel are driven by a rotating impeller to be discharged from the discharge port to complete the cleaning of sand and gravel.

1. The structure is reasonable and the sand and gravel treatment capacity is large

The structure of the wheel bucket sand washing machine is reasonable, exquisite, reliable, more convenient to operate and use, its operating principle is exquisite, and the sand and gravel processing capacity is large.

2. The quality of the finished sand is good

The sand and gravel cleaned by the wheel bucket sand washing machine is cleaner, and its transmission part is isolated from water and sand, which effectively reduces the failure rate of the bearing.

3. Green and environmental protection

Wheel bucket sand washing machine in the sand cleaning process of low noise, low pollution, by setting up a reservoir, can use the cleaned sewage, to achieve sand washing water recycling, reduce the waste of water resources.

4. Long service life

The bearings, screens and other components of the wheel bucket sand washer are very durable, which not only reduces the downtime of the equipment, but also extends the service life of the wheel bucket sand washer.

When working, the motor drives the impeller to rotate slowly after deceleration through the V-belt, reducer and gear, and the sand and gravel has a feeding groove into the washing tank, which rolls under the drive of the impeller and grinds each other to remove the impurities covering the surface of the sand and gravel, and at the same time destroys the water vapor layer covering the sand particles, so as to facilitate dehydration; At the same time, water is added to form a strong water flow, which takes away impurities and foreign substances with small specific gravity in time, and discharges them from the overflow washing tank to complete the cleaning function. The clean sand and gravel are carried away by the blades, and finally the sand and gravel are poured into the discharge chute from the rotating impeller to complete the cleaning of the sand and gravel.

The wheel bucket sand washing machine can remove the impurities covering the surface of the sand and gravel, destroy the water vapor layer covered with sand particles, and achieve the purpose of cleaning natural sand or artificial sand.

In the work of the wheel bucket sand washer, first of all, the motor drives the V-belt and the reducer to operate, and after the equipment gear is decelerated, the impeller is driven to rotate slowly. The material to be cleaned enters the cleaning tank from the feed chute, and the rotation of the impeller drives the material to roll up and down, and the materials grind each other. In the friction process, the material is cleaned, and the cleaned impurities are taken away and discharged by increasing the amount of water to complete the cleaning work.

The wheeled sand washing machine has stable operation, high cleaning efficiency during the working process, and the material after sand washing has high application value.

1. High output

This sand washing machine has an output value of up to 200 tons per hour. Working normally for 8 hours, more than 1,600 tons of mountain sand can be washed in one day, and the output value is still considerable!

2. Long service life

The wheel bucket sand washer impeller bearing device is isolated from water and water contact materials, which basically avoids the damage of water, sand and pollutants to the bearing, greatly reduces the equipment failure rate and prolongs the service life.

3. A variety of specifications

The wheel bucket sand washer screen can be adjusted according to the customer's requirements, whether it is coarse sand or fine sand, it is completely up to you.

4. Don't worry about sewage treatment

According to the needs of customers, a sedimentation tank can be set up after the wheel bucket sand washing machine, and flocculant can be added for recycling after clarification.

As one of the main sand washing equipment on the sand and gravel production line, the wheel bucket sand washing machine has been used in sand and gravel yards, mining, water conservancy and hydropower, concrete mixing plants and other industries. Because the wheel bucket sand washing machine can easily clean and remove impurities in various sand and gravel raw materials, it is considered to be a relatively simple sand washing method.

The wheeled sand washing machine can remove the impurities covering the surface of the sand and gravel, destroy the water vapor layer covered with sand particles, and achieve the purpose of cleaning natural sand or artificial sand. The following introduces the working principle and production advantages of the wheeled sand washing machine:

The wheeled sand washing machine is mainly composed of a transmission mechanism, a sand outlet, a sand outlet and a sand washing tank. First of all, the motor drives the V-belt, reducer, and gear to rotate, and the gear decelerates and drives the impeller to rotate. After the impeller runs stably, the sand and gravel is fed into the sand washing tank.

The sand and gravel continue to roll with the rotation of the impeller, and the sand and gravel rub against each other, which can continuously remove impurities on each other's surfaces and destroy the water vapor layer covering the sand particles, thus contributing to the subsequent dewatering work. As the amount of water increases, the impurities removed from the surface of the sand and gravel will be removed.

1. The wheeled sand washing machine has the advantages of stable operation and low failure rate, and the bearing is separated from water and materials, which avoids the damage caused by premature pollution and rust of the machine, ensures stable operation and reduces the failure rate;

2. The wheeled sand washing machine has high working efficiency, less sand and gravel loss, and high flushing efficiency, which can fully meet the requirements of high-grade materials.

3. Long service life, simple structure of wheeled sand washer, few wearing parts, all wearing parts are made of wear-resistant materials, which greatly prolongs the service life of the equipment.

The wheel bucket sand washer can clean mixed sand! With the development of artificial machine-made sand, the market demand is also growing, coupled with the development of the construction industry, the use of sand and gravel aggregates is growing, and the requirements for the sand washing machine are getting higher and higher, which is not only efficient, but also requires water conservation, and the wheeled sand washing machine just meets this requirement. The following introduces the working principle and processing advantages of the wheel bucket sand washing machine:

When the wheeled sand washing machine is working, the motor drives the impeller to rotate through the reducer, V-belt and gear, and the sand and gravel enters through the feeding trough, grinds and rolls under the drive of the impeller, removes surface impurities, and destroys the water vapor layer at the same time, which is conducive to dehydration; When washing sand, water is added to form a strong water flow, and the impurities with small specific gravity are discharged from the overflow port, and the clean sand and gravel are poured into the discharge chute from the blades to complete the cleaning process.

1. The structure of the wheeled sand washing machine is simple, and the transmission device of the impeller is isolated from the material and water, which can avoid bearing damage and reduce the failure rate of the sand washing machine.

2. The loss of stone powder and fine sand in the sand washing process is small, and the gradation and fineness modulus of machine-made sand can also meet the standard requirements.

3. The wheeled sand washing machine has few wearing parts, there are almost no other wearing parts except the screen, and the equipment has a long service life and does not need to be repaired for a long time.

4. The wheel bucket sand washing machine has a large processing capacity, small power consumption, convenient equipment maintenance, high cleanliness and convenient maintenance.

5. The sealing structure of the sand washing machine equipment is good, and the transmission device is fully blocked, which ensures the durability, high efficiency, good cleaning and dehydration effect of the sand washing machine products.

The above introduces the related problems of can the wheel bucket sand washing machine wash mixed sand, I hope it will help you!

Wheel bucket sand washing machine (stone washing machine) is widely used in metallurgy, building materials, hydropower and other industries such as washing, grading, impurity removal and other operations, suitable for fine and coarse size material washing operations. It is especially suitable for sand and gravel for construction and road construction. The sand washing machine has reasonable structure, convenient maintenance, large processing capacity, low power consumption and high cleanliness.

When working, the power device drives the impeller to rotate slowly after deceleration through the V-belt, reducer and gear, and the sand and gravel enters the washing tank from the feeding groove, rolls under the drive of the impeller, and grinds each other to remove the impurities covering the surface of the sand and gravel, and at the same time destroys the water vapor layer covering the sand particles, so as to facilitate dehydration; At the same time, water is added to form a strong water flow, which takes away impurities and foreign substances with small specific gravity in time, and discharges them from the overflow washing tank to complete the cleaning process.

Working principle of spiral sand washing machine:

The spiral sand washing machine is a kind of sand washing machine, which mainly stirs the sand and gravel through the screw device in the equipment, so that the soil in the sand and gravel is mixed with water and discharged from the flow port on the equipment, and the sand and gravel is gradually screened under the action of the screw device and discharged from the discharge port at the top, so as to realize the cleaning and screening effect of sand and gravel.

Schematic diagram:

There are several kinds of sand washing machines, the common ones are wheel sand washing machines and spiral sand washing machines. The wheeled sand washing machine is a wheeled bucket sand washing machine, which leaks water in the process of rotation to achieve the effect of cleaning.

Sand washing machineIt is widely used in sand and gravel yards, mining, building materials, transportation, chemical industry, water conservancy and hydropower, concrete mixing plants and other industries.

There are two main types of sand washing machines on the market now – wheel sand washing machine and spiral sand washing machine.

One. Wheeled sand washer.

Mainly by the V-belt, gear, reducer to drive the impeller to rotate slowly, sand and gravel from the feed chute into the washing tank, by the impeller to drive tumbling, grinding, remove the sand and gravel surface covered impurities and destroy the water vapor layer, play the role of cleaning, dehydration, and finally add water to form a water flow to take away impurities and foreign matter with small specific gravity, to complete the cleaning effect.

Classification: According to the number of wheel buckets, it is divided into single wheel bucket, double wheel bucket and three-wheel bucket sand washing machine, the output of different types of sand washing machines is different, and the more wheel buckets, the greater the output of the sand washing machine.

Two. Spiral sand washer.

According to the different particle size and specific gravity of sand and gravel, the principle of different settlement rates of sand and gravel materials is used to realize the cleaning effect of sand and gravel. Under the rotation of the screw device, the impurities and water are discharged from the outlet of the sand washing machine equipment, while the clean sand and gravel aggregate is discharged from the top outlet to achieve the function of cleaning and screening.

Classification: There are mainly single spiral and double spiral sand washing machines, and the double spiral sand washing machine has a larger output.

The failure of the sand washing machine is that the sand is not clean, the amount of sand washing is reduced, and the bearing temperature is too high. Today, share the faults and solutions that may be encountered in the use of the sand washing machine.

Yunnan sand washing machine malfunction.

Sand washing is not clean.

Solution: When washing sand, you should first let go of the flushing pipe, and then feed the sand washing, the amount of water should be moderate, not only to keep the cleaning sand clean, but also not to overflow along the slot, when feeding, not too much, not too much, these will affect the quality of the sand.

Reduction or leakage of sand washing.

Causes of failure: 1) damage to the sand net;

2) The sand mesh fixing bolt falls off.

Solution: 1) Inspect and repair or replace the sand net;

2) Tighten the bolts.

The shaft temperature is too high.

Causes of failure: 1) Dirty grease;

2) Improper amount of grease;

3) Bearing damage (generally the first two reasons).

Which model of these two types of sand washing machine is easy to use, you need to combine the actual situation, and when choosing a sand washing machine, you should consider factors such as sand and gravel composition, production capacity, production site and budget, and choose the one that suits your own production requirements, in order to obtain the best economic benefits. The following is the difference between these two sand washing machines::

When the spiral sand washing machine is working, it needs to be arranged obliquely, and the sand and gravel are stirred through the screw device in the equipment, and the water and impurities in the sand and gravel are discharged from the outlet of the equipment, and the sand and gravel are screened out under the action of the screw device, and then discharged from the outlet to achieve the effect of cleaning and screening the sand and gravel, and the equipment has three functions: cleaning, dehydration and grading;

The wheeled sand washing machine is a motor through the V-belt, reducer, gear deceleration after driving the impeller to rotate slowly, the sand and gravel in the impeller driven by tumbling and grinding, in this way to remove the surface impurities of the sand and gravel, destroy the water vapor layer covering the sand and gravel, conducive to dehydration, add water to form a strong water flow, can take away impurities and fine foreign matter, and discharge from the outlet to complete the cleaning effect.

The spiral sand washing machine has a long body and adopts a horizontal structure layout, and the spiral sand washing machine does not need to use a screen, which reduces the wear and tear of the screen in the work, and the service life of the equipment is longer;

The structure of the wheeled sand washing machine is simple, the wearing parts are few, the floor area is small, and the impeller transmission part is isolated from water and materials, which can reduce the failure rate of the equipment.

The spiral sand washing machine has a larger processing capacity, higher power utilization, high cleanliness, can clean fine and small particle size stones, and can clean the sand and gravel with serious mud quality, which is generally configured in a large-scale sand making production line;

The processing capacity of the wheeled sand washing machine is relatively small, the sand loss during the cleaning process is small, and there is no need to use too much water resources, so it is generally suitable for small and medium-sized sand production lines.

The above introduces the difference between spiral sand washing machine and wheel bucket sand washing machine, which of these two sand washing machines is good, and the specific decision is made according to the production needs of users.

It depends on what kind of soil is clayey or ordinary, and the amount of soil is different.

The wheel bucket sand washing machine is widely used, and its function is to filter out impurities in the sand and gravel. In the sand and gravel production line, although the sand washing machine is not as concerned as the crusher and sand making machine, the quality of the sand washing machine will affect the composition and quality of the artificial sand in the sand and gravel production line, so the sand washing machine is a magic weapon to ensure the quality of sand and gravel. This article will introduce to you the working principle and characteristics of the wheel bucket sand washing machine.

The sand and gravel are sent into the sand washing tank by the conveyor belt, and the impeller rotates under the action of the motor, and the rotating impeller can not only keep the water movement in the sand washing tank, but also drive the sand and gravel to move. In the continuous movement and friction between the sand and the water, the impurities on the sand and gravel are washed away, and then taken out of the sand washing machine by the rotating impeller, so that the cleaning of the sand and gravel is over, and when the sand washing machine is working, water should be continuously added to discharge the light debris after flushing from the overflow outlet flushing tank.

1. The design of the sand washing machine is reasonable, the structure is simple, and the operation is simple. There are few problems during operation, and even if there are problems, they are easier to fix.

2. There are no wearing parts in the sand washing machine, so the service life is generally long. Here it is recommended that users who want to buy a sand washing machine must choose a first-class sand washing machine, because in this way, the sand washing machine is more durable, and there is basically no need for maintenance or replacement during the entire production process.

3. Sand washing machine is widely used. In addition to natural sand and artificial sand, the sand washing machine can also be used to clean other small particles, such as coal, ore, etc., and the sand washing machine is not negligible as a cleaner in the sand and gravel production line.