Does the cleaning port of the Y type filter have to be installed facing downward?

Here are some of the well-known brands recognized in the Y-type filter industry that are widely recognized and have a great reputation. While rankings may vary depending on time and market conditions, the following brands are generally considered to be among the top brands in the valve industry:

The following influential first-line brands of water system valves and industrial valves can be used as a reference, but for reference only: Suzhou Neway Valve, Shanghai Guanlong Valve, Shanghai Qizhong Valve, Sanhua, Su Yan, Shentong, Su Valve, Nanfang, Jiang.

First, the word Yao. The above manufacturers are only estimates and references, and the specific situation may vary or fluctuate at any time due to changes in a series of factors such as changes in the market, the size of the competition pattern, and the stability of product quality. As an indispensable key device in industrial production and civil facilities, the quality and reputation of the valve brand directly affect the satisfaction and trust of users.

These brands are known in the valve industry for their innovative technology, high-quality products and reliability. It is important to note that the market and industry are evolving rapidly, and different rankings may vary depending on time and region. For the most up-to-date ranking information, it is recommended to refer to industry reports, professional organizations or market research data for more detailed and accurate information.

That's right, the cleaning port is facing downwards for replacement and cleaning!

Steam or gas pipes: the filter is horizontal; Liquid pipes: the strainer is installed facing down; Vertical mounting:

According to the filter installation point. Y-type filters are usually installed at the inlet end of pressure reducing valves, pressure relief valves, water level valves or other equipment to remove impurities in the medium and protect the normal use of valves and equipment. The Y-type filter has the characteristics of advanced structure, low resistance and convenient sewage discharge.

Y-type filter is Y-shaped, one end is to make water and other fluids pass through, one end is to precipitate waste, impurities, usually it is installed in the pressure reducing valve, pressure relief valve, water level valve or other equipment inlet end, its role is to remove impurities in the water, to protect the normal operation of the valve and equipment, the water to be treated by the filter enters the body from the water inlet, and the impurities in the water are deposited on the stainless steel filter screen, resulting in a pressure difference.

When the differential pressure reaches the set value, the electric controller gives the hydraulic control valve and the drive motor signal, triggering the following actions: the motor drives the brush to rotate, the filter element is cleaned, and the control valve is opened at the same time for drainage, the whole cleaning process only needs to last for tens of seconds, when the cleaning is over, the control valve is closed, the motor stops rotating, the system returns to its initial state, and begins to enter the next filtration process. After the equipment is installed, the technician will debug, set the filtration time and cleaning conversion time, and the water to be treated will enter the body from the water inlet, and the filter will start to work normally.

Only for the installation of Y-type filters, the state will not set specifications, because it is too simple, as long as you pay attention to the direction of liquid, the installation of fluid flow direction in the vertical pipeline should be from top to bottom, pay attention to the filter should be below the pipeline, and according to the filtration cleanliness requirements, choose the appropriate filter screen, which is reflected in the relevant construction acceptance specifications.

Internal documents that I just got from a friend.

Installation direction of Y-filter, steam or gas pipeline: screen side facing horizontal, liquid line: screen downward, vertical installation: installation according to the installation direction of the filter.

Y-type filter is usually installed at the inlet of safety valve, relief valve, water level valve or other equipment to remove impurities in the medium and protect the normal use of valves and equipment.

Y-type filter is suitable for the filtration of water, oil and gas, the total water supply network is 18 30 mesh, the ventilation network is 10 100 mesh, and the oil supply network is 100 480 mesh, and the basket filter is mainly composed of nozzles, guides, filter cloths, flanges, flange covers, fasteners, etc.

When the liquid enters the filter blue through the main pipe, the solid impurity particles are trapped in the filter blue, while the clean liquid is discharged through the filter outlet through the filter blue.

Y-type filter installation direction, steam or gas pipeline: the filter screen faces horizontally; Liquid pipes: The strainer is installed facing downward; Vertical mounting:

According to the installation orientation of the filter. Y-type filters are usually installed at the inlet of pressure reducing valves, pressure reducing valves, water level valves, or other equipment to remove impurities in the medium and protect the normal use of valves and equipment. Y-type filter has the advantages of advanced structure, low resistance and convenient sewage discharge.

The applicable medium of Y-type filter is water, oil and gas. The main water supply pipe network is 18-30 mesh, the ventilation pipe network is 10-100 mesh, and the oil supply pipe network is 100-480 mesh. The basket filter is mainly composed of nozzles, main pipes, filter cloths, flanges, flange covers and fasteners.

When the liquid enters the filter blue through the main pipe, the solid impurity particles are clogged in the filter blue, while the clean liquid is discharged through the filter blue through the filter outlet.

The direction of the arrow on the body of the Italian or brand Y-type filter is consistent with the direction of liquid flow, and it can be installed vertically and horizontally.

The Y-type filter can be installed horizontally or vertically, and the direction of the inlet and outlet should be consistent with the direction of the arrow on the valve body.

It can be installed horizontally and vertically, and the direction of pipe installation can be determined by subsequent cleaning work.

The Y-type filter is installed at the inlet end of the equipment to remove impurities from the medium to protect the valve. The correct installation method is horizontal installation or vertical downward mounting.

One. How it works

Y-type filter is an indispensable filter device in the pipeline system of conveying fluid medium.

Y-type filters are usually installed at the inlet end of pressure reducing valves, pressure relief valves, shut-off valves (such as the inlet end of indoor heating lines) or other equipment to remove impurities in the medium to protect the normal use of valves and equipment.

The Y-type filter has advanced structure, low resistance and convenient sewage discharge.

The Y-type filter is mainly composed of a pipe, a main pipe, a filter screen, a flange, a flange cover and fasteners. When the liquid passes through the main pipe into the filter basket, the solid impurity particles are trapped in the filter blue, while the clean fluid passes through the filter basket and is discharged through the filter outlet.

The reason why the filter screen is made of a cylindrical surface of the filter basket shape is to increase its strength, which is stronger than a single layer of mesh, and the flange cover at the lower end of the Y-shaped interface can be unscrewed to remove the particles deposited in the filter basket on a regular basis.

Two. Installation method:

Before installing the filter, carefully clean the threaded connection surfaces of all pipes, and use pipe sealant or Teflon tape (PTFE) in moderation.

The end threads are not treated to avoid the introduction of sealant or Teflon tape into the piping system. The filter can be installed horizontally or vertically downwards.

According to the regulations, the state grants are paid to students every month. However, for the sake of convenience, some schools issue half of the money twice a year. Most schools have a good time for the state grants:

Generally, it is issued in mid-June, and the bursary is issued in two parts, half of each time, and one in January, most of which are issued at the end of each semester.

The Y-filter cannot be installed vertically, which is dictated by its filtration principle.

The filtration principle of Y-type filter: when the water passes through the filter screen, the impurities in the water are blocked by the filter screen and sink into the sewage collection tank at the lower part of the filter under the action of its own gravity.

If installed vertically, impurities in the water will not be able to collect in the sewage collection tank, which will not play a filtering role, and will even block the filter screen, resulting in dirty clogging.

The function of the filter is to filter out the dirt, impurities, rust and so on in the pipeline. It is generally installed on the front end of the equipment.

The suction inlet of the water pump can be equipped with a Y-type filter, and the filter has a wide range of applications.

Dirt eliminator, the decontamination device is installed on the water supply main of the user inlet, as well as the inlet of heat source (cold source), heating (cold) equipment, water pump, and regulating valve. Its structural forms include Y-type dirt eliminator, conical dirt remover, right-angle dirt cleaner and high-pressure dirt remover

It depends on what your pump is used for, please be specific.

The installation of the filter should be carried out according to the flow direction, recommended installation method, installation requirements, etc. shown in the product samples and installation instructions provided by the manufacturer.

The upstream and downstream of the filter can be set up with a differential pressure gauge or pressure gauge according to the needs of process production to judge the blockage, and the backflush cleaning pipeline should be configured according to the needs of the process.

3.When piping pipes, the convenience of permanent and Y-shaped installation and removal should be considered.

4.Piping design requirements for strainers.

5.Pipes equipped with Y-filters can be divided into intermittent operation and continuous operation when working.

During intermittent operation, shut-off valves are set before and after the Y-type filter to clean the filter.

In continuous operation, two sets of filters should be set up in parallel for permanent filters, and shut-off valves should be set before and after the filters (except for line-gap filters).

Internal documents that I just got from a friend.

There is no such selection rule, at least I have not seen such a recommendation from abroad.

Proponents may think that water hammer can reduce damage to the pipeline, but this will increase the resistance of the pipeline.

I have never heard of such a saying, it should be how to fit and how to use.

The landlord is lonely.

SH3012 has this rule, but the reverse flow type Y filter has not yet found any shape.

Y-type pipeline strainer belongs to the straight-through installation method, which can be installed vertically, but it must add a valve in front of the Y-type filter. Generally, Y-type filters should be used and prepared.