-
1. Sprinkle the plant ash on the charred place, and then scrub it with a damp rag. This is the earliest way of human cleaning, environmental protection and hygiene, but.
Not suitable for households that currently use natural gas.
2. Put the mountain red into the pot, add water and boil to clean.
3. Put the tomatoes in the pot and boil, and the black stains will fall off. However, this method is a bit wasteful of vegetables. But it's a good idea.
4. Mix the liquor, beer and water into the pot, cover the pot, and wash it after 5 minutes.
5. Put the apple peel or pineapple peel into the pot, add water and boil to clean.
Precautions for the use of stainless steel pots.
1. Pay attention to the heat when using the stainless steel pot, the thermal conductivity of the stainless steel pot is small, and the temperature is easy to concentrate, so it is the most important when cooking.
It is good to turn on medium-low heat, so that the stainless steel pot can be heated evenly.
2. After the stainless steel pot is used for a period of time, the surface is easy to turn yellow and dark, so you only need to use a damp rag to dip it in dirt powder and scrub it.
Do not scrub with steel wool.
3. When using a stainless steel pot on a coal stove, do not leave water stains on the outer bottom of the pot surface, which is easy to corrode the bottom of the stainless steel pot.
-
1) Put the water in a larger pot and add the pineapple peel to cook in a smaller pot; (2) Or put in potato skin; (3) Wash the new pot you just bought with soapy water, and if it is dark after use, wash it with water.
-
Hello! It can be easily removed with pineapple peel. Put the blackened pot into a large pot with pineapple skin and cook for 20 minutes, the black stains will immediately go away, and the stainless steel pot will be as bright as new. It can also be used for other stainless steel products.
If it helps you, hope.
-
Add some vinegar or cola to half a pot of water, keep the water temperature 10 degrees and soak for more than an hour.
-
<><What to do if the stainless steel pot burns black
Although the stainless steel pot will not rust, it will inevitably burn in the process of cooking, therefore, many friends want to know what to do if the stainless steel pot burns black, let's take a look at what methods are there to deal with this problem!
1. Brush the paste pot: soak it in hot water with laughter, it is easy to wash it, do not use a steel wool ball brush, it will break the pot, if it is an aluminum pot brushed, it is very bad for the body to cook rice after it is brushed. 2. If the bottom of the pot is pasted for rice and stir-frying, you can put a few mountain red in the pot, add a little cold water to boil (do not boil dry), and the bottom of the pot will be removed soon.
3. Tomatoes to paste the bottom of the pot: If you cook a few tomatoes that are not very good in the pot, they will naturally fall.
4. Remove the apple peel or pear peel from the bottom of the pot, add some water to the apple peel or pear peel, and then it will be easy to clean.
5. Beer and liquor to paste the bottom of the pot: If you accidentally paste the pot when cooking, there is a pot at the bottom of the pot, if it is not easy to brush off, you can pour a little liquor and beer and a small amount of water (the ratio is 1:1: mix, it is easy to scrub clean after 5 minutes with a lid).
6. Add a little vinegar to the pot, add water to the place where it has just been covered, heat the pot, and wash it off.
7. Add water to the pot and boil, add a small amount of dish soap, cover the pot, let it sit for one night, and then scrub it to remove.
-
If you have beer or liquor at home, you can also use beer and liquor to remove the food burned in the stainless steel pot, pour beer and liquor into the pot, add some water, let it stand for five minutes and then brush, it will be easy to brush off. The use of cleaning preparations specifically for stainless steel (such as: Fan Lan House, Zwilling people, green umbrella, etc.) can quickly remove all kinds of scale spots and rust on the surface of stainless steel.
Oranges to the bottom of the pot Cut a few slices of oranges and boil them in the pot, let them simmer overnight, and the next day the paste will turn up, and it will be easy to remove.
When we find that the bottom of the stainless steel pot is burnt and blackened, then we may wish to put some white vinegar in the pot and cook it over low heat for a while, at this time the black thing on the bottom of the pot will fall off. In a pot pour a little liquor and beer with a small amount of water, according to 1:1:
Mix in a ratio of 0 to 5, cover the pot, and leave it for about 5 minutes, at which point it will be easy to brush clean.
<> if you have plant ash in your home to remove the effect is also good, know that it is alkaline, such as tea stains left on the cup, then you only need to use plant ash to rub a few times on the tea stains, at this time your cup will be like new. Dish soap and steel wool balls are the simplest and most crude methods, of course, the effect is still there, but it is more laborious. Pour dish soap into the pot, and then rub it vigorously with a steel wool ball, which is very laborious and still effective, but it is not clean, and the pot is even more unsightly.
The stainless steel pot is not very serious, you can pour a solution mixed with baking soda and water in the pot; Then, scrub with a damp rag or scouring pad and the results are great. It is also a good idea to wipe the yellowing area of the test pot with a dishcloth dipped in toothpaste or a little vinegar, and then rinse it with water after a while. Stainless steel cleaning paste, when encountering a charred and blackened stainless steel pot, as long as it is slightly dipped in the paste and wiped a little harder, the accumulated old ash will immediately fall off a layer, and the original metallic luster of the pot body can be exposed.
-
The bottom of the stainless steel pan turns black, and you can choose to soak it in a mixture of white vinegar and baking soda, then scrub it clean.
-
At this time, buy some detergent that specializes in cleaning stainless steel pots. After spraying, wash with iron sand. Wash it a few times to get it clean.
-
The best way to do this is to use a steel wool ball dipped in dish soap and brush it vigorously, and after brushing for a while, you can brush off the black layer.
-
The most effective way to burn black and clean the stainless steel pot is as follows:
1. In the case of not waiting for the pot, after soaking the bureau in warm water for a period of time, it can achieve twice the result with half the effort, and it can be cleaned with ordinary cleaning methods! Give it a try! If you wait to use the pot, put water on it, and heat it for a while, it can be easily cleaned.
2. Waste ** card and magnetic card wash and paste pot. It is inevitable to paste the pot when cooking, and if you use a hard shovel to clean the scorched dirt, it will cause scratches, and if you use a wooden spatula, it is difficult to completely remove the scorched scale. How it works:
Use a seizing fluid card along the edge of the pan to gradually scrape off the scorch. Note that you don't need to use too much force when scraping. If the card is made of rigid plastic, it can also be used to scrape dirt on the gas stove.
3. Using stainless steel cleaning paste, many people don't know how to start if they want to clean, because the stubborn black scale and rust are really difficult to clean, and you just use a steel wool ball hard brush to have no effect, you can try stainless steel cleaning paste.
Maintenance method of stainless steel pot
1. Boil the pot first after buying. After buying the stainless steel pot, wash it with dish soap first, and then wash it with hot water once to remove impurities such as floating ash. Pour in water, add some white vinegar, heat until boiling, then turn off the heat and rinse with hot water.
Continue to heat until smoking, add a little oil to let the fat in the oil embed in the pan, and finally turn off the heat and wipe clean.
2. Do not use bleaching powder or ammonia-containing detergents. These components react with the metal, accelerating the corrosion of the metal and corroding over time.
3. Wipe dry immediately after washing. This avoids water stains and water spots.
4. Add salt after the water in the pot boils. Add salt before the water boils, and there are likely to be some small spots in the pot that are difficult to brush off.
-
Hello, dear, how to wash the stainless steel pot in the black The most effective way: a stainless steel pot is easy to stain black scale, difficult to scrub, now as long as the larger pot at home is added with water, put in some pineapple peel, and then put the smaller pot into it, boil for 20 minutes, wait for cold and take it out, all bright as new! The blackened charred scale at the bottom of the pot can be wiped with rosin perfume and toothpaste powder, and wiped with a toothbrush or vegetable melon cloth, which has a good effect.
The braised meat is accidentally burned, and there is a thick layer of burnt meat at the bottom of the pot, which cannot be washed off and is difficult to scrape off, what should I do? Fill the pan with one-third of any kind of vinegar (white vinegar or fruit vinegar). If it is cheap), add two-thirds of the water (it must cover the blackened part), cover and boil for five minutes, soak overnight, and gently scrape with a cream knife or spoon to remove the blackened bottom.
Method 2 In the case of not waiting for the pot, after soaking in warm water for a period of time, it can achieve twice the result with half the effort, and it can be cleaned with ordinary cleaning methods! Give it a try! If you wait to use the pot, put water on it, and heat it for a while, it can be easily cleaned.
Method 3 Waste ** card, magnetic search card wash the paste pot. It is inevitable to paste the pot when cooking, and if you use a hard shovel to clean the scorched scale, it will cause scratches, and if you use a wooden spatula, it is difficult to completely remove the scorched scale. How it works:
Use a bridge to drain dust along the edge of the pot and gradually scrape off the scorched scale. Note that you don't need to use too much force when scraping. If the card is made of rigid plastic, it can also be used to scrape dirt on the gas stove.
Method 4 Using stainless steel cleaning pasteMany people don't know how to start if they want to clean, because the stubborn black dirt and rust are really difficult to clean.
The stainless steel pot is due to the fact that this kind of steel contains a certain amount of chromium alloy elements, which can form a solid oxide film (passivation film) on the surface of the steel that is insoluble in certain media, so that the metal is isolated from the external medium without chemical reaction. In this kind of steel, in addition to containing more chromium (Cr), some are also matched with the addition of more other alloying elements, such as punch limb nickel (Ni), so that it has good chemical and scattered lithological stability in air, water and steam, and has enough stability in the aqueous solution of many acids, alkalis and salts, and can still maintain its advantages of corrosion resistance even in high or low temperature environments.
-
How to clean the inside of the stainless steel pot:Fang Bu guess 1:Pick a few tomatoes that are not very good, put them in the pot and boil, slowly the bottom of the pot will burn off, and then simply clean it.
Method 2:Cut a few slices of oranges and boil them in a pot, cover the pot and let it sit overnight, and the next day the mug will turn up, so that it is easy to clean.
Method 3:Drop a few drops of vinegar into it, put some hot water in it, and boil it to remove.
Method 4:First boil the pot over low heat, sprinkle salt when it smokes, shake for a minute, turn off the heat, and then wipe it again, you can remove the cavity type.
Method 5:Apply toothpaste, dip a cloth in some water, and rub it vigorously.
Method 6:Sprinkle laundry detergent in the pot and rub vigorously with a cleaning ball to remove the blackened part.
There are two methods, one is to use passivation paste, which is specially used to clean short stainless steel welds, which only need to be applied to the weld for 20 minutes and wiped off; The other is for more welds, first put the workpiece into the mixture of nitric acid and hydrofluoric acid to soak and clean for 15 minutes, take it out and rinse it with water, and then put it into nitric acid to passivate for 20 minutes, take it out and rinse it clean.
Differences: 1. Different degrees of corrosion resistance: 316 stainless steel contains MO, which has better corrosion resistance than 304 stainless steel in a high-temperature environment, so in a high-temperature environment, engineers generally choose 316 material parts. >>>More
A2-70 generally refers to the bolt grade.
A2: Material classification code, "A2" indicates the material group, that is, the second group of austenitic steel A2, generally 304 class of materials, A4 refers to 316L >>>More
The cleaning methods of the countertop are not the same, and the cleaning methods of the stainless steel countertop are as follows. >>>More
1: Grade 2507 duplex stainless steel.
Two: chemical composition. >>>More