How to test the headphones, how to detect the headset microphone

Test headset methods;

1. We are in the mobile phone or computer system.

The test is to listen to the three-frequency performance of the headphones, the resolution separation, the positioning and sound field of the sound, the performance of transient dynamics, and the sound coloration and bass, according to each item, find the relative**targeted test, it is best to be familiar with it**, it is recommended to have more than 2 devices for comparison, but it should be noted that the front-end should be the same (different devices** effect is different, the general product mobile phone can be, the high-end product should be a better front-end), it is recommended to use lossless**.

Why wouldn't it be easier for me not to make a series of playlists for a specific item and then analyze each point step by step? First of all, I am not professional enough, and then there is no unified standard, I can share my thinking, such as listening to vocal singing, I will listen to the performance of the vocals, including breathing, ventilation, swallowing saliva and other details, good headphones can be heard, such as listening to symphony orchestra performances and various "movement times", this kind of **rich content, can be comprehensively measured, and there are many tests on major platforms**.

1. Find a suitable sound source: users choose their own familiar **, listen to it on different headphones, and compare the effects;

2. Listen to whether the sound is clear: When listening to the sound, the user judges whether the earphones are making uncomfortable sounds. For example: "hiss", "hum", "coax", etc., if there are such sounds, it means that there is a problem with the quality of the headphones;

3. Test whether the earphones are distorted: adjust the sound of the earphones to the maximum to judge whether the sound is harmonious.

When testing headphones, you should first start with their shape. And then the most important thing is whether its volume is clear or not, which is the main thing.

If the album is a good or bad earphone, you must first find the source of the sound, and then test the breath and enjoyment of the sound quality.

Choose the headphones you want to test, connect them** to test if they have some noise, and you can set their noise cancellation and whether their sound isolation is good.

Generally speaking, it is to test the sound quality of the headphones, and there is also the sound, which generally requires you to select different types of songs and then test the audio.

The best way to do this is to use specialized testing software.

Listen to the sound quality by wearing headphones in the ear, and use its surround sound effect as a performance criterion.

Hello, the way to test the headphones is very simple, just connect the headphones to your phone, and then you can test its effect.

You can connect accordingly to feel the sound quality and sound of it, as well as some of its effects.

Its main human factor is the test of sound quality and sound quality, just listen to some more complex songs.

If you test it well, you will find that there are some differences.

This is the first thing that Mi himself makes sure that there is nothing wrong with the phone, and then he can connect the headphones to see.

In fact, I think that if you test the standard of headphones, it probably means that its sound quality is good.

As an ordinary ** enthusiast, you can't judge the difference between 300 yuan or 3000 yuan headphones? If it's an audiophile, it's probably hard to tell.

You can plug that one in first. And then debug it or something.

Headphone test You can connect the headphones to your phone and you see how the sound quality is.

Question 1: How to test the headset in win7? Control panel.

Recording - Configuration - Microphone Test

Question 2: How to test the microphone of the headset Testing the microphone under Windows is actually very simple. We can use the audio recorder that comes with Windows to test it.

The method is: click "Start All Programs Accessories Entertainment Audio Recorder", click the red circle button to start recording, then you can speak to the microphone to see if the waveform on it has changed. If there is a change in the waveform, the microphone is normal.

Question 3: How to detect that the headset speaks normally Test it on the computer system, or find someone to try it on QQ.

Question 4: How to test whether my headset microphone has sound Click Start Settings Control Panel Sound and audio equipment can be tested. In addition, there are picture hints on the two plug-in sides of the computer.

One is a microphone and the other is a microphone. Take a closer look.

Question 5: I bought a headset with its own microphone, how to test the microphone??? Double-click on the volume (that little speaker). Options-Properties-Microphone is ticked.

Then OK. Turn the mute off. Advanced Control - Advanced - Microphone Enhancement.

This is the first solution that cannot be spoken.

How to test if the microphone is broken:

Start - Accessories - Entertainment - Tape Recorder.

Test it here.

Question 6: How to check if the earphone is broken After inserting the earphones into the storage machine, check as follows:

1.Call a friend, relative** to check the call.

3.Log in to chat voice software such as QQ or YY, speak into the headset, and conduct a voice test.

Question 7: How to check whether the microphone on the headset is good or bad? 5 points right in your picture.

Press Options--Properties--Recording--If you can't select it, change the mixer above) --Select "Microphone Volume"-OK.

Then tick the option under the microphone volume.

Try the recording again.

Question 8: How do I check if the microphone of the headset is broken? You can now try whether the headphones have sound on other people's machines or mobile phones, if not, the headphones are broken, whether it is a plug or wiring problem, the crack is generally not very expensive to change one. If the headphones have sound, then it is a tragedy, it may be a problem with the corresponding interface on the motherboard.

But generally not, I hope the landlord will solve the problem as soon as possible! Rattle!

Question 9: How to test the quality of the microphone There is a start program accessories entertainment recorder in the lower left corner. Start recording, click on the red dot button, and then speak to this microphone, you can see the waveform, if there is no waveform, please check the microphone settings and plug.

That's how I usually test. It's relatively simple and practical!

2. You can try to find it according to the radiation range of Bluetooth.

3. Bluetooth headset pairing method - before Bluetooth headset pairing, it is necessary to ensure that it is fully charged, and it generally takes more than 2 and a half hours to charge.

4. It is a newly bought earphone, which has not been connected to other devices, and the earphone will have a voice prompt after powering on, and it will automatically search for a device that can be paired. At this time, turn on Bluetooth on mobile phones and other devices that support Bluetooth.

5. Then turn on detectability on mobile phones and other devices, that is, it can detect nearby Bluetooth signals. Then search for a nearby Bluetooth signal, and after searching for a Bluetooth headset, the model of the Bluetooth headset will generally be displayed, click to connect. If you are prompted to enter a password, the default is 0000, and you will be successfully connected after entering the password to confirm.

6. The Bluetooth headset has been paired before, and if you want to change the connection to other mobile devices, you need to pair it manually. Although the buttons of different Bluetooth headphones are different, the function is the same.

7. After finding the multi-function button, press and hold the multi-function button for about 8 seconds when the earphone is powered off, and then the red and green indicators flash alternately, indicating that the Bluetooth headset has entered the pairing state, and then the mobile phone searches for the Bluetooth signal, and then connects.

8. The Bluetooth protocol of the mobile phone and earphone is the version and above, and there is no need to enter the password when connecting. Directly select pairing after the Bluetooth pairing request prompt box appears.

9. The Bluetooth headset and the mobile device are paired successfully, when the Bluetooth headset is turned on, and the mobile device turns on Bluetooth at the same time, the blue display light of the Bluetooth headset will flash slowly, indicating that the Bluetooth headset and the mobile device are automatically paired and connected successfully.

10. When the mobile phone comes, press the multi-function button of the Bluetooth headset to answer.

11. Generally, Bluetooth headsets can be paired with 5-8 devices, but can only be connected with two devices at the same time.

While the test method for a loudspeaker is fundamentally similar to that for headphones or earbuds – driving an acoustic transducer, taking the results with a measurement microphone and analyzing them – the latter is complicated by its usage patterns. Measuring and characterizing the audio quality of headphones, earbuds, and headphones presents unique challenges for both design engineers in R&D labs and test engineers on the production line due to the tight coupling of headphones to the ears and the sound transmission paths involved.

In this section, AP has a variety of resources to discuss these challenges, key electroacoustic measurements, references to relevant measurement standards, acoustic test fixtures required to measure headphones, headphone acoustics, and various practical aspects of headphone measurements.

For the sake of simplicity, the various resources here usually refer to "headphone testing", so it's worth noting that it's a shorthand reference for headphones and headphones (earbuds) audio quality measurements and characterization for listening** and other full-band audio content. Again, these discussions apply to headphones, but only when used as headphones.

More specifically, headphones are categorized based on their shape and how they are coupled to the ear. The main categories of headphones are:

1. The earphones that surround the pinna completely surround the pinna (outer ear) and are placed on the surface of the head around the pinna. They may touch the pinna, but they do not significantly compress the pinna.

2. There are super hearing headphones on the pinna.

3. An in-ear earphone is a small earphone that can be placed in the earnail cavity (a cavity outside the ear canal).

4. Plug-in earphones are small earphones that can partially or completely enter the ear canal.

5. The ultra-turbinate earphones are for resting in the turbinate cavity ridge earphones, which are acoustically divided into open and closed.

Open-back headphones (also known as nominally non-enclosed) intentionally provide an acoustic pathway between the external environment and the ear canal. Enclosed (or nominally sealed) headphones are designed to prevent any acoustic coupling between the external environment and the ear canal.

Considering the various types of headphones, it is worth noting the importance of fitting when testing. The fit of the headphones with the head and/or pinna can have a significant impact on performance. Therefore, Acoustic Test Fixtures (ATFs) play an important role in headphone testing, and the various fixtures selected based on headphone characteristics and applications are discussed in the references below.