Wireless router working modeAP, repeater, ap wds, wds, client, which one should be selected for mobi

If you only have one router, just choose the normal mode.

Install the following method to proceed:

First of all, we type in the address bar of the browser, and then enter the router management interface.

Here, we select "System Tools" and open the option "Change Login Password" to change the login password.

The original username and password are admin, and then everyone chooses their own username and password, and after modification, save it to successfully modify the router login password.

Set the password for the router's wireless signal connection.

When entering the router management interface, here, we open "Wireless Settings" and enter "Wireless Security Settings".

Here, we first need to turn on the wireless security settings, and then choose the security type. Security Tips: To ensure network security, it is highly recommended to use the WPA-PSK WPA2-PSK AES encryption method.

Regarding the authentication type and encryption algorithm settings, I recommend that you still have the default settings of the system, and we will not modify them here. Including the group key update cycle is not modified, we only need to enter the psk password we set. It is recommended to use numbers and letters for the PSK password, which is more secure.

After clicking Save, the router will ask the user to restart the router for the configuration to take effect.

1. AP, that is, wireless switch, is generally used for multi-radio station routing to extend signal coverage.

For example, on the second floor of the home, one is placed on the first floor as a router, but the wireless signal is unstable on the second floor, then the second wireless router can be placed on the second floor, and the router is connected to the first one with a network cable, and the computer on the second floor is connected to the wireless network on the second floor, instead of the wireless network on the first floor.

2. Client, client mode, the file space wireless router is used as a wireless network card, connected to other routes through wireless mode, and the computer is connected to this route by wired mode.

3. Router, that is, wireless routing mode, this is the most commonly used way of working, generally home broadband connection, connect the broadband cat to the WAN port of wireless routing, and then do dial account settings, just use this mode.

4. Bridge, that is, bridging, is similar to AP, which is also to expand the coverage area of wireless signals, and in bridge mode, the second router is wirelessly connected to the wireless network of the first router, and then publishes its own wireless network for use.

5. Repeater, that is, relay, is a bit similar to bridging, the difference is that in the above example, the two wireless routers have their own wireless networks, but the relay is to relay and amplify the wireless signal of the first router, and form a new wireless coverage area, so there is only one wireless network.

1. Wireless AP mode.

This mode is used by users of existing routers, which extends the wireless function to the existing LAN, so that those users who use the book can directly access the LAN through the wireless network. Tengda W150M is in this state, there is no need to manage users, DHCP or speed limiting, traffic limiting and other functions are handed over to the superior router, but the wireless network encryption function is still available. The AP Mode Setup Wizard guides the user step-by-step.

2. Client+overlay (client+AP) mode.

Client+Overlay (Client+AP) mode.

It can realize universal relay and amplification of wireless signals, and realize RJ-45 port data transmission and reception at the same time. To put it simply, when the Tengda W150M is in this state, it is a client. For example, we use Telecom's Tianyi WIFI wireless broadband access, which is originally a wireless access method, Tengda W150M is connected to Telecom Tianyi through wireless connection, and then the wireless signal of Tianyi is shared by relaying.

The Ethernet port of Tengda W150M becomes a LAN port.

Turning on a feature like relay allows the router to automatically scan the surrounding wireless network signals.

3. Wireless bridging + coverageWireless bridging + coverage.

This mode allows two W150M to connect the two LANs wirelessly, and at the same time can provide WiFi connection for the following computers, so that the two LANs can be merged into one.

4. Signal amplifier.

The signal is released to the speed of the rock file.

W150M scans nearby wireless networks, captures their signal amplification and re-transmits it, this function ignores wireless network encryption or not, it simply regenerates and amplifies the signal of the wireless network.

5. Wireless router jujube skill.

Wireless routers.

This is an ordinary wireless router model, but W150M has only one Ethernet interface, and in this mode, the RJ45 Ethernet interface will work as a WAN interface. Both clients need to connect wirelessly to the router.