Procedure for setting the wireless AP mode of a wireless router.

The AP is part of the WDS bridging, and this step simply extends the signal of the infinite router, allowing the wireless router to pick up the signal from a greater distance.

Primary Router Settings:

First of all, it is necessary to know the SSID, channel, security mode, and password of the main router. Enable the DHCP server of the primary router.

Subordinate Router Settings:

Enter the management page of the router - Advanced Settings - Working Mode - AP Client Mode - fill in the SSID and MAC address of the main router, select the same security mode and password as the main router. You can also use the scanning function.

Wireless Settings – Basic Wireless Settings – Channels (choose the same channel as the main router).

Network Settings - LAN ("IP address" here should be set to a different network segment from the first router.) For example, the IP address of the first router LAN is: Then the IP address of the second router should be changed to:

In this mode, it is equivalent to having a line from the LAN port of the higher-level router to the WAN port of the lower-level router, except that it is connected to the WAN through the Wi-Fi interface. All Ethernet wired interfaces are used as LANs.

Unlike WDS, AP Client works in a full router mode, so it can have all the basic functions of a router.

WDS works in the subnet of the higher-level router, and the AP client can build its own subnet to facilitate network configuration and management.

Note: After switching modes, the router needs to be restarted to take effect, I hope it can help you.

After entering the router management interface, click "Wireless Settings" on the left and select "Enable WDS" mode.

Next, click "Scan", then the wireless router will automatically search for the signal of the surrounding wireless routers, display the searched wireless router in the list, select the wireless router ready to be bridged, and then click "Connect".

Next, the router automatically returns to the wireless settings interface, and you can already see the SSID name of the bridged wireless router, which is the wireless router that is bridged with the router, at this time, you can also make some relevant encryption settings.

In the last step, click "Save", and then the router restarts the wireless router, at this time, the AP mode of the router is successfully turned on.

As we all know, routers have long been the core equipment of computer networks, and their importance cannot be underestimated, so do you know the router WiFi setting method for AP mode? The following is some information I have compiled about setting up AP mode on the router's wireless network for your reference.

How to set up AP mode for the router's wireless network settings:

In existing network applications, there are two types of environments that require the use of wireless routers as wireless switches (wireless APs):

The original network can only provide wired Internet access, in order to meet the mobile phone, notebook and other terminal equipment wireless access to the Internet, need to add wireless network.

The original wireless network has limited coverage, and the signal in some areas is weak or there are signal blind spots, so it is necessary to increase the wireless coverage.

This document describes how to set up a wireless router as a wireless switch (wireless AP).

The application environment is as follows:

A wireless router uses a topology diagram as a wireless switch (AP).

Connect your computer to the LAN port of your router and make sure that your computer automatically obtains the IP address and DNS server address.

Note: In order to avoid IP conflicts or DHCP server conflicts, do not connect the router to the front-end network here.

1. Change the SSID (wireless name).

Log in to the router management interface, go to Wireless Settings >> Basic Settings, modify the SSID, and click Save.

Note: Some routers will prompt that the parameters need to be restarted to take effect, and the router does not need to be restarted during the setup process.

2. Set a wireless password.

Go to Wireless Settings >> Wireless Security Settings. Select WPA-PSK WPA2-PSK, fill in the PSK password (wireless password) with no less than 8 digits, and click Save at the bottom.

On the router management interface, click DHCP Server >> DHCP Service, select DHCP Server as Inactive, and click Save.

1. Modify the management IP

In Network Parameters >> LAN port settings, modify that the IP address is not the same as that of the primary router (it is recommended to set the IP address to be the same as the primary router). When the setup is complete, click Save.

2. Restart the router.

The restart dialog box pops up, click OK, and wait for the restart to complete.

Connect the LAN port of the wireless router (that is, interface 1 and 4) to the LAN port (or LAN switch) of the front-end router according to the application topology diagram.

At this point, when the wireless router (wireless AP) has been set up, the wireless terminal searches for the message connected to the wireless network of the wireless router (zhangsan).

The implementation method and detailed operation steps are as follows:

1. First, log in to the web management interface of the wireless router.

2. Secondly, after completing the above steps, enter the router management interface, click on the "Wireless Settings" option on the left side, and then tick the "Turn on WDS" option as shown in the figure below, and then enter the next step.

3. Then, after completing the above steps, click Scan, the wireless router will automatically search for the signal of the wireless router, and then click the "Connect" button as shown in the figure below, and then enter the next step.

4. Then, after completing the above steps, the router will automatically return to the "Wireless Settings" interface, set the SSID name of the bridge wireless router for relevant encryption, as shown in the figure below, and then enter the next step.

5. Finally, after completing the above steps, click the "Save" button to restart the wireless router, and the AP mode of the router can be adjusted to the wireless routing mode as shown in the figure below. In this way, the problem is solved.

2. Enter the router management interface, click on the wireless settings on the left, and select to turn on WDS mode.

4. The router will automatically return to the wireless settings interface, and the SSID name of the bridged wireless router will be used to set the relevant encryption settings.

5. Click Save, the router restarts the wireless router, and the router AP mode can be adjusted to the wireless routing mode.

Hello. You can reset the router to factory settings so that you can use wireless router mode.

Answer: Here take the TP-Link WR840N wireless router as an example, first you need to log in to the web management interface of the wireless router, the default login IP address is: , and the login username and password are admin by default;

2. After entering the router management interface, we click "Wireless Settings" on the left and select "Turn on WDS" mode;

3. Next, click "Scan", then the wireless router will automatically search for the signal of the surrounding wireless routers, display the searched wireless router in the list, select the wireless router ready to be bridged, and then click "Connect".

4. Next, the router automatically returns to the wireless settings interface, we can already see the SSID name of the bridged wireless router, which is the wireless router bridged with our router, at this time, we can also make some relevant encryption settings, at this time, we can set it up yourself.

5. The last step, click "Save", and then the router restarts the wireless router, at this time, the AP mode of our router is successfully turned on.

In this way, we have turned on the AP mode of the wireless router, and if there are multiple wireless routers in the house, then they can be wirelessly bridged to make the router's wireless signal travel farther away. Of course, in order to use this feature, you must purchase a router that supports wireless AP mode.

The AP mode of the wireless router can maximize the signal range, and can complete the bridging between the two routers, the following is how to set the AP mode of the wireless router that I have collected and provided for you, I hope it will help you. Welcome to read and learn!

How to set the AP mode of the wireless router

01 Log in to the router and give it to the switch that you need to use. The router is powered (do not connect to the front-end network for the time being), operate the computer to connect to the LAN port, enter it in the browser and enter the management interface.

02 Modify the wireless signal, go to the wireless settings > Basic settings, and set the wireless network name in the SSID number.

03Go to Wireless Security Settings, select WPA-PSK WPA2-PSK, and set a wireless password of no less than 8 digits in PSK Password.

04Disable the DHCP server, click DHCP server, and select Disable.

05Modify the management address, go to Network Parameters >> LAN port settings, and change the IP address to be in the same network segment as the LAN port IP of the main router but does not conflict. For example, if the IP address of the front-end router is set to, then the IP address of the wireless router is changed to be between 2 and 254). Save and restart your router.

Setting AP Mode Before setting up AP mode, you need to set a wireless router to router mode and connect to the Internet. Next, follow these steps to set the second or more wireless routers to AP mode:

1: Connect the wireless router to the computer Connect a computer to the LAN port (or any LAN port) of the wireless router. At this time, if the computer is connected to the network, you need to disconnect it first.

2: Enter the wireless router management page, open a browser, and enter the management IP address of the wireless router (usually .).Or, and sign in with an administrator account.