What fun can you do with plastic bottles?

The common honeycomb paper lamp on the market divides the rectangular strips of colored paper of equal size, A4 paper into 4 equal parts, and 8 sheets can be made into one piece. Align, staggered and glued together, cut into the shape of the side of the fruit on one side, and then glue the bottom and top of the paper together to create a three-dimensional fruit. This method can be made into apples, pineapples, gourds and many other things.

There are many handicrafts that can be made of its practical beverage bottles, which can be divided into splicing method and cutting method according to the processing method of raw materials. For example, a round bottle can be cut with a spiral strip, the width is generally about 5 mm, and the cut thin strip can be used to become a basket, and other similar items; The method of splicing can be done more, such as cutting the bottle into the shape of petals, cutting it into several pieces, and sewing the edges with threads to form a lampshade in the shape of a flower. The square bottle can be made into a tower, and the colored bottle can be put together in the shape of two scallops like a flower-shaped lampshade.

What can you do with an empty bottle after drinking a drink? Previously, due to the length of the article, the 33rd issue of "Things" only introduced the empty bottle LED lamp itself. Now pay attention to environmental protection and low carbon, the plastic bottles left over after drinking the drink are usually sent to **, and there are also environmentalists who use more than 10,000** plastic bottles to make a boat, completing the feat of crossing the Pacific Ocean.

As long as we are creative, can plastic bottles add more surprises to our lives? This LED light is the product of creativity, the designer twists the used waste plastic bottle, and then installs LED lights in the bottle mouth to project different shapes of lights. The shape of each bottle lamp is unique, and it has a very artistic atmosphere in the bar!

This lamp does have quite a personality, especially the twisted feeling is especially suitable for the decadent bar ....... But there's more to a bottle than just a few lights. For example, the catamaran model -- and the "plastic bottle ship across the Pacific Ocean" -- that really pulled the wind to the wind

A lot of the gadgets are cut out of plastic bottles.

The magic of plastic bottles: This fishing method is easy and fun.

Plastic bottles can be used to make many daily necessities, storage, small toys, etc., the following examples are illustrated:

1. It can be made into a small flower pot, placed on the balcony or desk, and raised some small plants.

2. The large plastic bottle can also be used to grow vegetables, such as shallots and garlic.

3. Make a small pendant, which can be placed at the entrance of the house, put some keys, gloves, bags, umbrellas, etc.

4. It can be made into various small toys.

5. The bottle cap can be cut off for storage.

It is possible to make an aerodynamic boat.

1. Prepare mineral water bottles, battery boxes, motors, metal clips, ice cream sticks, small wooden sticks, fan blades, double-sided tape, and white latex.

2. Paste the ice cream stick and the small wooden stick together with white latex.

3. Paste double-sided tape on the back of the battery box and small motor, and paste them on the small wooden stick.

4. Install the fan blades on the small motor.

5. Connect the wire of the battery box with a metal clip to the small motor, and pay attention to whether the positive and negative poles of the connecting wire are consistent with **, otherwise the motor will be reversed.

6. Finally, paste the ice cream stick on the top of the mineral water bottle and it is finished! The position of the ice cream stick should be centered, otherwise the boat may roll over due to the unstable center of gravity.

Plastic bottlesCan do: pen holders, sprinklers, pet grass racks, draft pure plastic flowers, flower pots, small accessories storage boxes, jewelry storage boxes, etc.

1. Make a pen holder: directly use a knife to cut the mineral water bottle in half, use the bottom side to hold pencils and other stationery, and you can also make some decorations on the pen holder to make the pen holder more beautiful.

2. Make a pet grass rack: a large mineral water bottle, for example, a large mineral water bottle can be opened in the upper half of the mouth, and then scalded with a lighter, and the middle is fixed on the cage with a wire, and it can be used as a pet grass rack.

<>4. Make a flower pot: The plastic bottle is large, you can open a large mouth of Jingtong, and fill it with soil to grow vegetables and flowers and succulents.

5. Make a jewelry storage box: you can cut the bottom of the mineral water bottle, reduce it in order from large to small, and then fix it in the middle with a wire.

The following takes plastic bottles as an example, and the operation method is as follows:

Materials needed: plastic bottles, scissors, florets.

1. First of all, prepare a drink bottle, as shown in the picture below.

2. Then, cut it from the upper part of the bottle as shown in the picture below.

3. Cut into two sections, as shown in the figure below.

4. Then cut the bottom of the plastic bottle vertically, as shown in the figure below.

5. Cut into thin strips of equal width, as shown in the figure below.

6. Cut the bottle into thin strips of equal width all over the week, as shown in the figure below.

7. Start weaving flowers, as shown in the figure below.

8. Buckle the bottle down to make the cut out tassels, as shown in the figure below.

10. Just like this, as shown in the figure below.

11. The methods of the same method are folded in turn, as shown in the figure below.

12. This is done, as shown in the figure below.

13. Insert a small flower, this is a small vase, as shown in the figure below.

Preparation materials Tools: mineral water bottles, utility knives, sticks, balloons, scissors, dispensing.

1. Prepare an empty mineral water bottle and use a utility knife to intercept 2 3 beverage bottles.

2. Cut and press.

3. Stuff a red balloon and inflate it to the right size.

4. Tie the balloon and seal it.

5. Bottle cap. 6. Make lantern spikes out of wrapping paper.

7. Assemble the bottle cap and cut lantern spike onto the lantern.

8. Tie the balloon to a small wooden stick.

9. Such a small lantern is complete.

Answer hello, the magic of waste drink bottles is 1 small watering can. Some bottles are so colorful that they can be discarded and can be used to make a practical little watering can. When using waste bottles to make small watering cans, just tap some small holes in the bottom of the bottle.

2 measuring cups. Some bottles (such as discarded bottles) have scales, and they can be used as scales as long as they are processed slightly. 3. Make the smell of clothes hit people.

Don't throw away empty perfume bottles, lotion bottles, etc., just open the lid and put them in a suitcase or closet, which will make the clothes smell offensive. 4. Roll out the noodles. When rolling noodles, if you can't find the rolling pin for a while, you can use an empty glass bottle instead.

Rolling noodles in a bottle filled with hot water also softens the hard noodles. 5. Remove wrinkles on the tie. A crumpled tie can be made smooth and beautiful without an iron, and the original wrinkles will be eliminated by rolling the tie on a cylindrical beer bottle and using it the next morning.

6. Watch care. Cut the small plastic medicine bottle, put the watch on it, draw the shape of the watch with a ballpoint pen and cut it out according to the same, cut out the long opening of the strap on both sides, wear the strap out of the mouth, and then pass through the bolt at both ends of the watch, wear it on the hand, which is smooth, sweatproof, and not easy to fall off. 7-system funnel.

Use scissors to cut from the middle of an empty Coke bottle, the upper part is a very practical funnel, and the lower part can be used as a water cup. 8. Chopstick holders. Wrap the glass bottle from the neck of the bottle with a circle of cotton yarn soaked in alcohol or kerosene, light it and when the fire is about to be extinguished, place the bottle in cold water so that the glass bottle will be cut neatly.

It is also practical to use the lower half to make a chopstick holder. 9. Wind lamp. Cut off the bottom of the glass bottle and insert it into a lamp holder made of bamboo tube.

There should be a few ventilation holes in the bottom of the lamp holder, and a few gaps should be made in the bottom edge of the bamboo tube, so that if the lamp is placed on the table, air can enter through the gaps. 10 goldfish bowls. Thick glass bottles, you can make a goldfish bowl according to the method of chopsticks.

On the cork below, attach a section of rubber tube, and you can change the water of the goldfish without fishing it out. 11 chandelier shades. Find a large, brightly coloured, empty wine bottle with a cap (e.g. brandy bottle, etc.), cut the bottle and polish it smooth.

Attach the chandelier head and bulb to the bottle, drill a hole in the original cap and let the wires pass through it, and screw the cap on. Put an 8 cm long colored plastic tube on the neck of the bottle. Put a circle of golden stickers in the middle of the bottle and it becomes a beautiful chandelier.

Have a great day.

Plastic bottles can be made: plastic bottle rockets, mineral water bottles, homemade creative vases, plastic bear cups, etc.

First, the production of plastic oak bottle rockets.

Prepare materials: round cups, plastic bottles, cardboard, scissors.

1. Cut out the middle of the round paper, and make a macro survey of the top of the small rocket as shown in the figure below.

3. Stick a round piece of paper on the bottle, draw the outline with a paintbrush, and the rocket is finished!

2. Mineral water bottles make their own creative vases.

Material preparation: plastic bottles, scissors.

milliliter beverage bottles;

2. Plastic beverage bottles, cut from the top of the bottle body;

3. Cut into two sections;

4. Vertical cutting, when it is cut to the place where the pattern is cut, stop;

5. Cut the bottle into thin strips of equal width along the body of the bottle;

6. Start weaving flowers, first buckle the bottle and open the cut ears;

7. All the thin strips, in turn, are pressed to ensure that the details that are broken off will not be returned;

3. Plastic bear cup production.

1. Prepare a drinking mineral water bottle and remove the logo.

2. Glue the colored paper to the top half of the bottle with double-sided tape, choose a piping floral pattern, and put a floral dress on the bear.

3. The lower part of the bottle is also glued with double-sided tape. Here, choose a yellow one.

4. There is a connecting seam on the side to glue purple colored paper. To maintain symmetry, both sides are glued together.

5. Cut two ears of the same shape, fold a small part of the straight ear, and then glue it with double-sided tape.

Techniques for doing handicrafts

1. Decide on the project you want to make: First, identify the items or handicrafts you want to make, and gather relevant information and tutorials.

2. Prepare tools and materials: Collect and prepare the required materials and tools according to the needs of the project, such as paper, scissors, glue, needle and thread, etc.

4. Start making: According to the steps, start making items in the correct order, such as making handmade cards, fabric embroidery, handmade jewelry, etc.

Plastic bottles can be used to make a variety of useful handmade items, and here are some common ways to make them:

Vases: Plastic bottles are cut into the right shape, which can be decorated with colored paper or fabric to make a beautiful vase.

Lampshade: Cut plastic bottles into suitable shapes, which can be decorated with colored paper or fabric to make a unique lampshade.

Jewelry: Cut plastic bottles into small pieces or pieces, which can be used to make earrings, necklaces, bracelets and other accessories.

Potted pots: Plastic bottles can be cut into suitable shapes, which can be used to grow small plants and make unique potted pots.

Storage box: Cut the plastic bottle into a suitable shape, which can be used to make a storage box, which can be used to store small items.

Toys are cut into suitable shapes and can be used to make simple toys such as kites, cars, etc.

Here's the tutorial:1. A thin line is attached to the bottom of the two decaped bottles, which becomes a microphone after being tightened.

2. Cultivate seeds in small pots.

3. Hide a sounding device inside.

4. After the water is frozen, turn it upside down to slide.

5. N glass bottles are filled with water with different height differences, and the music is played by tapping it with chopsticks.

6. Go to the sand and mud pavement, put the sand and mud into the bottle, and after inverting it on the road, gently screw out the bottle, and a cylinder is formed. The mini-project is as follows: put the mooncake lid in nine columns, make four columns on the mooncake lid and then cover another mooncake cover, and finally build another column at the top - a mini-building is completed.

Plastic refers to a plastic (flexible) material with high molecular weight synthetic resin as the main component, adding appropriate additives, such as plasticizers, stabilizers, antioxidants, flame retardants, colorants, etc., or rigid materials formed by curing and cross-linking.

Guess exactly what a plastic bottle can do by hand as follows:

1. Use scissors to cut the plastic bottle, and pay attention when cutting. Try to start with a third of the way through. The tapered side is not to be left, leaving the bottom part.

2. Then start sorting out these thin strips. Pay attention to cut vertically, cut into thin strips of equal width, and stop when you cut to the position of the pattern.

3. When these thin strips are pressed outwards and pressed into the shape of petals to begin to weave flowers, press the thin strips downward, and deduct the bottle body downwards to make the ears cut out.

4. Arrange the cut thin strips neatly and fold them inward (you can weave some shapes according to your preference).

5. After weaving, a flower basket is ready, and you can paint the color on the bottle body, or graffiti.

Expansion: Plastic bottles are mainly made of materials such as polyethylene or polypropylene and added a variety of organic solvents. Polyester (PET), polyethylene (PE), and polypropylene (PP) are widely used as raw materials for plastic bottles, and the corresponding organic solvents are added, heated at high temperatures, and then blown by plastic molds, extruded, or injection molded plastic containers.

It is mainly used for liquid or solid disposable plastic packaging containers such as beverages, food, pickles, honey, dried fruits, edible oils, pesticides and veterinary drugs. Plastic bottles have the characteristics of not easy to break, low cost, high transparency, and food-grade raw materials.