How to make distilled water at home, want to make some distilled water at home, how to get it?

You can use a pot to boil water to collect distilled water, after the water boils, find a few more cold pot lids, and control the water droplets of distilled water into the container on the inside of the lid.

Distilled water (English: distilled water), also known as purified water, pure water, and purified water, is water that is pure, clean, and does not contain impurities or bacteria after treatment.

It is made of water that meets the sanitary standards of drinking water as raw water, and is prepared by electrodialyzer method, ion exchanger method, reverse osmosis method, distillation method and other appropriate processing methods.

Distilled water is sealed in a container and contains a small amount of carbohydrates with carbonic acid, which is colorless and transparent, and can be drunk directly. The best space water and distilled water on the market are pure water.

Distilled water (zhēngliúshuǐ) refers to pure water prepared by the distillation method, which can be distilled once and multiple times. After a distillation of water, the non-volatile components remain in the container and are removed, and the volatile components enter the initial fraction of the distilled water, usually only the middle part of the fraction is collected, accounting for about 60%. The types can be divided into primary and multiple distilled water.

Distill water once.

After a single distillation of the water, the non-volatile components (salts) remain in the container and the volatile components (ammonia, carbon dioxide, organics) enter the initial fraction of the distilled water, and usually only the middle part of the fraction is collected, accounting for about 60%.

Distill water several times.

To obtain purer water, alkaline potassium permanganate solution can be added to primary distilled water to remove organic matter and carbon dioxide; A non-volatile acid (sulfuric acid or phosphoric acid) is added to make ammonia a non-volatile ammonium salt. Since glass contains a small amount of water-soluble components, it is necessary to use quartz distillation vessels to obtain very pure water when performing secondary or multiple distillations, and the resulting pure water should be kept in quartz or silver containers.

After the teapot is boiling hot water, steam will continue to come out of the spout, use a bottle frozen in the refrigerator, reach the spout, you can collect, this method is simple and easy to understand, I hope you can collect successfully.

To make distilled water at home, you can choose a small pot, pour in an appropriate amount of water, and then cover the small pot with a larger lid.

Take a clean pan (it should be absolutely clean, some of you have washed it, and you should have a metal lid, it should also be washed), put water, boil, and place the lid on top of the pot at an angle, so that the cooled water droplets can flow down from one side, and collect it (the collector should also wash it out).

Preparation: a small bowl, pot, water, ice cubes.

3. Heat the water in the pot below, as shown in the figure below.

4. Next, put the lid of the pot on the pot backwards and put a few ice cubes on the lid.

5. Finally, take out the small bowl and get distilled water, as shown in the figure below.

Fill the kettle with water and boil it on the gas stove, then turn a clean cup upside down on the spout, then put a clean bowl under the cup. In this way, the water dripping from the cup is distilled!

Wash the lid first, then boil the water, and the water droplets on the lid are distilled water.

Drinking distilled water is healthier, so let's talk about how to make distilled water at home.

01 If you want to make distilled water at home, you need to prepare the following ingredients: steamer, small bowl, cold container, etc.

02 First of all, we must know the principle of distilled water, when the water vapor encounters an item with a lower temperature than it, it will condense into water droplets, and this water annihilation bead is distilled water.

03 We can use a steamer, add half trembling pot water to the steamer and boil, and wait for the water vapor to condense on the lid, then we can pick up the lid and pour it into the prepared container.

04 We can also put a cold container, such as a cup, and then put the cold cup into the pot, at this time there will be water droplets around the cup to solidify.

1. Tools: pots, bowls, ice cubes.

2. The better device for making distilled water is shown in the figure below, which requires a cooling device, a heating device and a filtration device, so as to make relatively good distilled water.

3. If you want to make distilled water at home, you can choose this kind of concave pot noodles, and the lid is recommended to be made of sleepy metal, and the glass lid of poor quality is easy to crack.

4. Then we put a bowl in the pot Wangma pie, which is heat-resistant and sturdy. Then pour a little water into the pot. Make sure the bowls in the pot don't float around.

5. Turn on the switch, heat the water in the pot, and wait until there is steam in the mold slightly, then put the ice cubes, or cold water bags, cold water bags have not been tried, it is more troublesome.

6. Then the rising water vapor meets the cold at the top of the pot, condenses into water droplets, and drips into the bowl in the pot, and it is successful.

Making distilled water is a simple but useful skill that can be used to purify water sources for experiments, drinking, or other occasions where high-purity water is required. Here's a guide on how to make your own distilled water.

Step 1: Prepare the device.

First, you need to have a still ready. Distillers can be obtained by buying them or making their own. Some basic stills include glass bottles, heaters, hail chillers, and water pipes. Some basic lab supplies such as beakers, funnels, and filter paper are also required.

Step 2: Prepare the water source.

Secondly, it is necessary to prepare a water source for distillation. To obtain high-purity distilled water, it is recommended to use deionized or distilled water as the starting water source. If deionized or distilled water is not available, tap or well water can be used, but it must be ensured that the water source is free of any impurities or contaminants.

Step 3: Heat the water source.

Pour the water into the still, then plug the heater into the power and start heating the water. When heating, pay attention to controlling the temperature of the heater to prevent the water source from boiling too much or overheating.

Step 4: Cool the vapor.

When the water source boils, the water vapor rises into the cooler. The water pipes in the cooler cool the vapor and condense it into a liquid. In this way, high-purity distilled water can be obtained.

Step 5: Collect the distilled water.

Collect the liquid from the condenser into a clean container. Before collecting the distilled water, it is advisable to drain the first few sources of sunnai drops to ensure that the distilled water is of high purity.

Summary. With the above steps, you can make your own high-purity distilled water. Distilled water can be used in laboratories, drinking, washing, and other applications that require high-purity water. However, when making distilled water, it is important to pay attention to safety and avoid any accidents.

1. Add half of the tap water to a 5 gallon (liter) stainless steel pot.

2. Put a glass bowl in the water to make sure it floats. The bowl must not touch the bottom of the pot, if the bowl does not float, take it out of the water, place a round grill at the bottom of the pot, and put the bowl back in the water.

3. The water in the pot must be boiled before proceeding to the next step.

4. Create a cohesive effect with a hot and cold barrier You can turn the lid upside down and fill it with ice cubes to grind it off. When hot steam hits the cold cover, it creates a condensing effect.

5. Bring the water in the pot to a boil When the water is boiling, the water vapor will rise and condense on the lid. The condensation will drip into the bowl. Let the distillation process continue until there is enough distilled water in the bowl to meet your needs.

6. Observe the water collection in the bowl, the water in the bowl is hot, but it should not be boiled. If the water in the bowl starts to boil, turn down the heat of the stove and just keep the water in the pot boiling.

7. Remove the pot from the heat and open the lid.

8. Take the distilled water out of the pot from the crack in the pot Be careful when doing so to avoid burning yourself. If you're willing to wait a while, you can wait for the water to cool before taking the water from the bowl.

9. Allow the distilled water to cool before storage.