Why is the Haval M6 so cheap? What is the difference with H6?

Why is Haval M6 so cheap, and Haval H6 is worse than **? Check it out!

Why is the Haval M6 so cheap? What's the difference with H6?

The reason why Haval M6 is cheap is because the technology is very mature, and the **chain is relatively complete, it is not worse than H6**, both are very good.

Because the positioning of Harvard M6 is relatively cheap, and the positioning is relatively low-end, this car belongs to the mini car and belongs to the economic type. Compared with the H6, it is a bit worse, for example, the shape of this car belongs to the old model, and many places are made of plastic, which is different from the cost of H6. The front door panels of the body are made of some soft materials, which makes the overall model look cheaper.

The sunroof is not a panoramic sunroof, and there are no air conditioning vents in the rear. This is the difference with H6, and it is also because the cost of materials is low, so it will be very cheap.

Haval M6 can be said to be the first generation of H6, the current H6 is produced after the first generation of H6 after several reforms, and M6 is still the original process, low cost, ** naturally low.

Because the Haval M6 is not as high as the H6, the dynamic positioning is not as good as the H6

There are also seven forward gears, and there is no option in an entry-level SUV that can surpass this gearbox. Therefore, the core assembly (second) gearbox of the car is not the reason why the Haval M6 is set at a low price, so only by reducing some configurations can the cost be controlled. In terms of exterior decoration, the front and rear protection, front and rear lights are simple and low-cost design, the body weight is lighter, and the size has not become smaller, indicating that the body stiffness has decreased.

The tires have also become smaller, and the rims have also been made low-cost. Approximately 2-3000 differences. Haval M6 is cheaper than Haval H6 more than 30,000 oceans, if you want to figure out why M6 is so cheaper, you have to understand the difference between it and H6, and then you will know at a glance the reason for the low price of M6.

Haval M6: Price: 10,000 yuan, compared with Haval H6, the engine is different, the configuration is simpler, everything else is the same, China's most cost-effective SUV, there is no one.

The H6 uses in-cylinder direct injection, these two different ways, obviously the technology of in-cylinder direct injection is more advanced, the gasoline atomization effect is better, the combustion is more sufficient, the emission is more up to standard, and the power efficiency is better, resulting in the result that H6 is relatively more fuel-efficient and powerful. It is also a reliable platform, when the very high cost of R&D design and input costs is completely flattened and recovered, this platform has a reason to reduce prices, the most is the cost of labor and raw materials, in fact, it is relatively cheap.

Moreover, Haval H6 sells more than 300,000 units a year, and when it has accumulated millions of units in the first two years, the design fee, mold cost, and purchased parts cost are basically converted, which is to sell one to earn one. **The Harvard H6 engine has more torque (more power) and is more fuel-efficient, making it easier to climb uphill and uphill sections. **The fuel consumption of the Haval H6 is around.

And the fuel consumption of the M6 is around.

It became a popular model that drove the sales of other models under Haval Automobile. At that time, there were two versions of the model, the gasoline version and the diesel version, of which the gasoline version was priced at 10,000 yuan; The price range of the diesel version is 10,000 yuan.

Because the cost of this car is not particularly high, and the sales of this car are not particularly good, there will be a price reduction, and it will be sold cheaper. It is worse than the H6 in terms of power, because the power of the Haval H6 is relatively stronger.

It's because the performance of this car is not good, so it will be very cheap. The difference between it and the H6 is that the safety performance of the H6 is higher than it, and the space of the H6 is also particularly spacious.

Mainly because this car has been released to the present, it is not expensive, and it has been a long time, compared with M6 and H6, in fact, there are differences in performance and internal configuration.

The material of M6 is not as good as H6, for example, in many places H6 is soft, but M6 is hard, and the sound insulation is not the same. Anyway, the M6 is much lower.

Haval M6 is very cheap compared to H6, and they are far behind. See who's driving the car? Is it the family's first car?

What is the main purpose? If it's family travel. The first car.

It is recommended to buy the Honda Fit in full. Men drive more. The minimum configuration on the manual.

Ladies drive more. The lowest configuration on the automatic transmission. Generally, the first car will be changed after five years of driving.

If you change the car, this Fit is the myth of second-hand car value preservation! For example, you buy any of the Great Wall. After three years, the value retention rate can be sold at a four-fold discount.

The five-year value retention rate of Fit is about 6% off! Compared with the Great Wall, the Fit is fuel-efficient, worry-free, and not bad. The fuel money saved in five years is almost enough to buy a second-hand Great Wall car that has been driven for five years!

A car for this price. I can't talk about it. It's just enough!

It is convenient to have a car, and you can run to a well-off faster!

Haval is a well-known ancestor who drinks oil, more than 100 kilometers of oil, and the value retention rate of domestic cars is low, and the value of domestic cars has been depreciated by half in three years. If you don't consider fuel consumption and value retention, you can choose a domestic car, if you want to buy a car of about 100,000 yuan, there is no special need to buy a joint venture car, such as Volkswagen and Japanese cars. Opinions are for informational purposes only!

Haval M6 is very cheap compared to H6, and they are far behind. Choose Harvard H6, of course, the space of Harvard M6 is much larger than H6, but the engine and gearbox used in M6 are the old H6, notoriously high fuel consumption, and in the workmanship is not at the same level at all. Poor workmanship will increase the wear and tear of the vehicle, and it is inevitable that there will be abnormal noises in the later stage, and Harvard M6 This model should be to deal with the remaining engine and gearbox of the old H6.

You have 10w now, and it is personally recommended to save some money on h6, and about 12w can go to the ground. If you buy M6, it will be almost 9W, and the later value retention rate H6 will be much higher, and it can be more fuel-efficient than M6, and the shape is also fashionable. Don't take out a loan, although there is no interest, but there is a financial service fee of about 3,000.

You don't have much money, but if you have enough money, go straight to the new H6.

H6 is a small profit but quick turnover, while M6 is a lower manufacturing cost of the 4G15B engine to achieve a lower ** to achieve "small profit plus more sales"; Even if the high cost of this car will cause losses, as long as the sales reach a certain point, it can turn into a profit, from the perspective of the chassis system. From the chassis point of view, the Haval M6 and the Haval H6 are both from the same platform, with the same front MacPherson independent suspension and rear double wishbone independent suspension four-wheel independent suspension system, adhering to the consistent style of Haval SUVs. The engine M6 uses multi-point EFI, while H6 uses direct injection in the cylinder, these two different ways, obviously the technology of direct injection in the cylinder is more advanced, the gasoline atomization effect is better, the combustion is more sufficient, the emission is more up to standard, and the power efficiency is better.

H6, exterior decoration, front and rear protection, front and rear lights are simple and low-cost design, the body weight is lighter, the size has not become smaller, indicating that the body stiffness has decreased. The tires have also become smaller, and the rims have also been made low-cost. Approximately 2-3000 differences.

Following the launch of the second-generation Haval H6 in 2017, the H6 will be upgraded and improved almost every year, constantly improving and optimizing its product strength according to the latest market needs at any time to maintain its competitiveness.

<> M6, the Haval M6 obviously follows the basic framework of the first-generation H6 in terms of powertrain, interior and chassis, and the exterior and interior have been optimized and upgraded. However, it is also cheaper by 3-4w to the range of 6-7w, and it has become very cost-effective in an instant. M6's main target customers are third- and fourth-tier cities, so it focuses on cost performance, and it has also been recognized by the market.

Don't think that a low price is a bargain! It's really wrong to think like this, the overall material of the M6 is not good, the engine is also mature, the space is large, and the quality is reliable.

Haval M6 is more cost-effective than H6, the body structure and parts have been fully matured after more than 10 years of market testing, and the accessories are lower, and the natural maintenance cost is also lower.

Enrich models with different positioning to meet the needs of customers at different price points. In the final analysis, there is not much difference between the three major parts of M6 and H6 sports version, the engine and transmission are exactly the same, they are all 4G15F multi-point EFI engines matched with Great Wall's own 7DCT450 seven-speed wet dual-clutch, all of which are front MacPherson rear double wishbone independent suspension, the difference in car price is due to the difference in the positioning of the two cars by the manufacturer, H6 itself is positioned higher than M6, H6 platinum version is equipped with 4B15A in-cylinder direct injection engine, and there is also a 4C20B in-cylinder direct injection engine.

M6 is relatively cheap, and then there is H6**, where there is M6** itself can not go up, and then there is the problem of cost, on the surface it is caused by different models, in essence, what is hidden is the interweaving of marketing strategies and interests.

I think the main differences between the two cars are in space, power, exterior design, interior materials and transmission.

Why is Haval M6 so cheap, and Haval H6 is worse than **? Check it out!

Personally, I think it's still worth it, because the best of this car is very suitable, and it's very cost-effective, and all aspects have met people's requirements, relatively speaking, many people are still willing to buy.

Worth. Because it feels particularly tall, the built-in space is more abundant, and it is particularly comfortable and functional, suitable for home use, and it is well worth buying.

It is worth it, the appearance is atmospheric, the interior is beautiful, it is more fuel-efficient, and the central control is also particularly high-end, especially comfortable, it is a good choice, you can start.

The quality of the Haval M6 is very high. The car has a lot of space, and the axle disc is also very stiff, and it is also very cost-effective, so it is worth buying.

I think the quality of the Haval M6 is very good, the cost performance is very high, the space is very large, the interior workmanship is very solid, I recommend buying.

The quality of this car is good, and it is very cost-effective, its only drawback is that it is more fuel-intensive, has a lot of space and is comfortable.