Ask for help from the computer master, the router can t connect to the network, there is an exclamat

The router is not set up, please set the router again.

There are two common access methods for home broadband, one is that the computer is directly connected to the household network cable or the network cable that is connected by the cat needs to be dialed up by the computer. The other is the equipment connected to the home ** line or optical fiber is the device that integrates the cat and the router, and the computer directly connects the cat without the computer dial-up connection, and the computer can be connected to the Internet by automatically obtaining the IP. The settings are as follows:

1: The computer is directly connected to the household network cable or the cat out of the network cable needs to be dialed up by the computer

Set the router WAN port parameters to PPPoe dial-up mode, and enter the broadband and password, and set other settings according to the router manual or the router setup wizard.

2: The equipment connected to the home ** line or optical fiber is a device that integrates the cat and the router, and the computer directly connects the cat without dial-up connection from the computer, and the computer can be connected to the Internet by automatically obtaining the IP:

Set the WAN port parameter of the router to dynamic IP, and pay attention to modify the IP address of the LAN port, so as not to be in the same IP segment as the IP address of the modem to avoid IP conflicts. For example, if the IP address of the cat is changed to the first three digits of the LAN port of the router, at least one of them cannot be the same as the first three digits).

Other settings can be set according to the router manual or according to the router setup wizard.

The router is not set up.

First of all, check to see if your router is connected.

Hello, the router is connected but cannot be connected to the Internet, it may be that there is a problem with the router settings. First, turn on your phone, enter the address of your router in your browser, and enter your login password. Click Connect Device Management, tap Banned Devices, and see if your computer or phone is disabled.

If you have your own device in the banned device, you can click the unban button on the right to unban your own device. If not, click Advanced Settings and WAN Port Settings to see if your router is connected. If it is disconnected, you need to check whether the broadband and password have been entered incorrectly, re-enter it, and then click the 'Connect' button to see if it can be connected.

If the password is fine, but it still can't be connected, it is a problem with the broadband provider, and you can only call ** to consult, or let it deal with it.

Questions. <>

How do you get this?

You can't see this clearly.

Open the Internet access settings or WAN port settings.

With a computer or mobile phone, log in to the router's settings page first, find and open the Internet settings or WAN port settings options, and you can see the router's networking status information. If the router shows Networking Failed at this time, then please read the following part carefully, if it shows that the networking is successful, then please ignore this part and read the following content directly. 1. Check the line connection: There is 1 WAN interface and 4 LAN interfaces on the ordinary network cable router (some routers only have 2 or 3 LAN interfaces), please follow the following method for the correct line connection.

1) The WAN interface on the router needs to be connected to the network port of the cat with a network cable. If you don't use the cat for your home's broadband, you need to plug the broadband network cable into the WAN port of the router. (2) If you have a computer at home, you need to connect to the LAN interface with a network cable, and any LAN interface is OK.

Points to note: (1) At present, some routers have the function of WAN port adaptation, this type of router, when the line is connected, you can connect at will, do not have to worry about the wrong network cable plugging. (2) After the router is connected to the correct line, the computer cannot be connected to the Internet at this time; But don't worry, it's normal.

Because when you set up a router with a computer, you don't need a computer to be able to access the Internet. 2. Check the way you access the Internet. Internet access in the router (some routers are called:

Networking mode, connection type, WAN port connection type, etc.), if the setting is wrong, it will cause the router to fail to connect to the network, that is, it cannot be used normally after connecting to WiFi.

You can click on the status to see if it shows the connection failed or the connection was successful.

Summary. 1. There is an exclamation mark in the network connection, the first thing to consider at this time is that the IP address and DNS settings of the network connection are wrong, such as IP address conflict or something, at this time, you need to manually adjust the IP address to avoid IP address conflict, if you can't set it, you can also restart the router. As for the DNS settings, you can directly repair the DNS in the housekeeper software, and you can restore the initial DNS settings by yourself if you don't have the software.

2. Broadband network arrears, open the browser for testing, along with the binding of the mobile phone card and the broadband network, when the mobile phone is in arrears, the broadband network will be in arrears, at this time we can verify, that is, open the computer or mobile phone, connect to the network, the exclamation mark does not matter, and then click on the router, if it is really in arrears, then the page of the router will prompt the arrears, just pay to restore the network.

1. There is an exclamation mark in the network connection, the first thing to consider at this time is that there is an error in the IP address and DNS settings of the network connection, such as the IP address conflict or something, at this time, you need to manually adjust the IP address to avoid IP address conflict, if Sun Zhenzhi does not know how to set it, you can also restart the router. As for the DNS settings, you can directly repair the DNS in the housekeeper software, and you can restore the initial DNS settings by yourself if you don't have the software. 2. Broadband network arrears, open the browser for testing, along with the binding of the mobile phone card and the broadband network, when the mobile phone is in arrears, the broadband network will be in arrears, at this time we can verify, that is, open the computer or mobile phone, connect to the network, the exclamation mark does not matter, and then click on the router, if it is really in arrears, then the page of the router will prompt the arrears, then the potato is in arrears, and the network can be restored only by paying the fee.

3. The router has been used continuously for too long, resulting in an internal program error crash. For many users, after the router is bought, it will not be unplugged and plugged in, and the router will not be powered off, which will cause the router to be in a high-load working state, and over time it will cause a crash and cannot access the network. The solution is also very simple, you only need to restart the router, and it is best to let the router rest for more than ten minutes.

4. The line connection of the router or optical modem is loose, which is also a frequent reason, and it is easy to loosen the line after a long period of use. At this time, we don't need to over-detect, we just need to unplug the power supply and plug the line back in. Spine such as 5、It is the failure of the intelligent network reputation box,At this time, it is also impossible to access the Internet,The detection method is also very simple,The router suddenly turned on a red light,Basically, the intelligent network box is faulty。

At this time, don't find a way to solve it, you can find a network maintenance personnel to solve it, and the fault of the smart network box does not belong to your own maintenance category.

Specific workarounds:

1. If the computer can still be connected to the Internet, it means that the previous wireless network may not be offline in a normal way, restart the computer and try it;

2. The appearance of an exclamation mark means that it is not connected to the Internet, and the first thing we should consider is whether the network cable connection of the router is the first regret question, it may be that the network cable is not plugged in well, the network cable is loose or the network cable plug is broken, and it is necessary to check it specifically;

3. Restart the router, some routers will be used for a long time, which may lead to high temperature and abnormal functions, so at this time, you only need to restart the router, turn it off, and let the router rest for a few minutes before restarting;

4. Check the number of connections of the router, sometimes the number of router connections is limited, or the design of the router itself is limited to only 3 or 4 user connections, in this case, if the number of connections reaches the limit, even if it is connected, it cannot be connected to the network;

5. If there is a problem with the router hardware, in this case, the hardware of the router may be broken, so it is recommended to replace the router equipment;

Install the Driver Wizard with a network card driver.

There are diagnostics in it.

Summary. Hello, the reasons for the exclamation mark on the wifi connection but not the Internet are as follows:

1. The network cable is not plugged in.

2. Is the network cable loose?

3. Is the network cable plug broken?

4. Some routers have been used for a long time, so let the router rest for a few minutes and then restart it.

Why is my wireless router connected, but I can't get on the Internet, and there is an exclamation mark under the signal.

Hello, please provide the following screenshot for you to answer.

Hello, the reasons for the exclamation mark on the wifi connection but not being able to access the Internet are as follows: 1. The network cable is not plugged in. 2. Is the network cable loose?

3. Is the network cable plug broken? 4. Some routers have been used for a long time, so let the router rest for a few minutes and then restart it. If you have any questions, please feel free to contact us.

1. Click the wireless network icon. In the Segment pop-up menu, click Open Network and Sharing Center.

2. In the left column of Network and Sharing Center, click Change adapter settings.

3. Enter the adapter, right-click on the wireless network connection, and then click "Disable".

4. Right-click on the wireless network connection, and then click enable to restart the wireless network.

5. If the exclamation mark persists, right-click on the wireless network connection and click "Properties".

6. In the wireless connection properties, select the Internet protocol version, and then click Properties.

The reason for this situation is that the router has not successfully connected to the Internet, including factors such as incorrect broadband or password filling, incorrect Internet parameter settings, or broadband line failure.

1. Fill in the broadband or password incorrectly.

Internet settings, re-fill in the correct password (pay attention to the case of letters).

2. Broadband limitations.

If the computer is directly connected to broadband and can access the Internet, connect the computer to the router with a network cable, enter the settings interface, > the Internet settings, select the WAN port MAC as the MAC address of the current management PC, and save it.

3. The dialing mode is selected incorrectly.

If the line Internet access mode is broadband connection, >> the advanced settings, select the dial-up mode to normal dial-up mode, and save it.

4. Illegal disconnection.

Please wait 5-10 minutes before re-dialing. Zhongzhou.

5. Broadband or password input incorrectly multiple times.

Refill in the correct password (capitalization).

6. Abnormal broadband.

Remove the router and whether it is normal for the computer to connect directly to the broadband.

7. The quality of the network cable is poor.

Try to replace the network cable of the WAN port of the router.

8. Broadband limitations.

Connect the computer to the router with a network cable, enter the settings interface, > the Internet settings, select the WAN port MAC as the MAC address of the current management PC, and save it. <>