I don t have disks in my computer, and the disks in my computer are gone

That local disk is all gone except for the C drive, how can you get it out again?

This is caused by a cache error, use the following software to fix it (**360 Guardian choose the computer clinic system icon icon display abnormal repair, if it is a disk icon error, select the local disk icon abnormal repair, no, restore the system or reinstall).

1) Repair with software, it is recommended to use the computer clinic in the 360 guard System icon icon display abnormal repair try, if the disk icon is wrong, select the local disk icon abnormal repair (in addition, win optimization master, Rubik's Cube windows optimization expert also has similar options, if necessary, please search**).

2) If the fault persists, restore the system or reinstall the system.

4) It's an XP system, and it's still very slow to boot, and sometimes it takes a long time for the blue screen self-test to turn on.

It could be that there is a problem with the disks, please fix it (fix each disk once, or just fix C).

Built-in disk repair method:

The specific steps are as follows: select the drive letter in my computer, right-click to select the properties, select "Tools Start Checking" in the pop-up drive properties window, and select "Automatically repair file system errors" and "Scan and recover bad sectors", and then click Start, the scanning time will vary depending on the disk capacity and scanning options (after doing it according to the above method, a box will pop up, the point is, repair after automatic shutdown at boot, win7 select the disk check button according to the plan).

Bad sectors on the hard drive will lead to corruption or loss of computer system files, computer failure to boot or freeze. Hard disk bad sectors can be repaired using NDD Disk Utility or Scandisk.

If the fault persists, please restore the system or reinstall it (it is still not possible to format the hard disk and repartition and reinstall it, if it doesn't work, you will have to replace the hard disk, or overhaul it).

Did you just install the system? If you have just installed the system, then you must have partitioned the disk when you installed the system.

What should I do if the disks in my computer are gone? Computer disk loss can be due to a number of reasons such as file system corruption, virus infection, partition loss, etc. Here are a few things you can try to recover:

1. Check whether the drive letter has been hidden or not assigned: Right-click "My Computer", select "Management" > Disk Management", and see if the D drive is hidden or not assigned a drive letter. If no drive letter is assigned, right-click the drive, select Change Drive Letter and Path, and add a new drive letter.

2. If the data is accidentally lost, it is recommended not to read and input new data into it at the first time, you can try to use some data recovery software to recover the lost files. Here are some data recovery tools that may be useful:

The specific operation demonstration process is as follows:

1. Open the software interface and click on the function setting option that needs to be restored.

2. Find the original storage location of the lost files, confirm that they are correct, and click the Start Scan function button.

<>4. After the file progress bar is successfully restored, click the "Open" button to view the successfully recovered files.

Note that the success rate of recovering files depends on a variety of factors, such as file size, storage device type, and how long the files were overwritten. Therefore, if you want to maximize your chances of a successful recovery, it is recommended that you stop using the device as soon as possible and carefully read the instructions of the recovery software before attempting to recover your files.

There are several possibilities for a computer to suddenly lose its disk:

1. The disk is broken and can only be repaired or replaced;

2. If the disk power cord or power interface is broken, the power cord should be repaired or replaced;

3. If the disk data cable or data interface is broken, the data cable should be repaired or replaced.

Problem Cause Analysis:

1. Poor contact and fracture of IDE cable connection port;

2. The data cable between the IDE interface and the hard disk is not connected;

3. The CMOS battery of the motherboard is insufficient;

4. If the problem persists, the hard disk is broken.

Solution: 1. Check the IDE cable interface, plug it in again, and replace it if it is broken;

2. Confirm that the data cable connection between the IDE interface and the hard disk is normal;

3. Replace the CMOS battery;

4. It would be tragic if the hard disk was damaged, and I could only buy a new one.

What should I do if the disks in my computer are gone? The specific steps are as follows:

2. There are four types of recovery in the main interface of Hi Format Data Recovery Master, which are: Quick Scan, Deep Scan, Format Scan, and Partition Scan. If we need to recover USB flash drive data, we can insert the USB flash drive that has lost data into the computer, and select the "Quick Scan Recovery" mode in the main interface of the software to scan the disk where the lost data is lost.

3. Select the location where the original data file is stored, and you can directly select the disk where the corresponding data was accidentally deleted by mistake, and click "Start Scan" below to automatically scan the USB flash drive of the lost data.

4. Wait for the end of the scan, you can select the files we need to recover in turn according to the file path or file type, and click the "Rough File Recovery" option below to retrieve them.

Hi Format Data Recovery Master is an expert-level data recovery software that supports recovery data preview, data recovery is more intuitive, and at the same time, it supports many functions such as quick scan, deep scan, etc. It makes sense that the sooner the data is recovered, the better, because the shorter the data loss time, the greater the likelihood of recovery.

Method 1: Fill in "Start" and "Run" fields to open Group Policy. In the "Local Computer Policy" on the left side of the window, select "User Configuration", "Administrative Templates", "Windows Components", "Windows Explorer", and then find the "Hide these specified drives in My Computer" policy in the right window.

Double-click on it to pop up the "Hide these specified drive properties in 'Keep My Computer' on your resume" window, check "Enable" below, and select "Restrict Drives" from "Select one of the following combinations". Press F5 to go out and see that "My Computer" should still have no disk. Then select "No Restriction Drives" in the menu.

Method 2: Right-click on "My Computer" and select "Manage", and click "Disk Management" under "Storage" in the pop-up "Computer Management" window. In the right window, all partitions of the local hard disk will appear, right-click the partition to be hidden (such as the D drive), select "Change Drive Name and Path" from the pop-up shortcut menu, and then the "Change Local Disk (D's drive letter and path" window will pop up, see if there is "D:" in the pop-up window

option, if not. Add it yourself. Then go to "My Computer" and take a look.

Summary. 1. The computer hard disk is broken. There are many reasons for this, such as hard drive errors due to insufficient power supply, virus damage, accidental deletion, etc.

Generally, it can be recovered by data recovery software. Second, the virus hides the file. Some viruses, folder viruses, will hide the real files.

Antivirus software often only kills the virus itself, but does not restore hidden folders. Can be restored manually. Method:

In general, you can try to show all files first to show hidden files. However, this type of virus usually destroys the mechanism of showing hidden files, so it is usually necessary to use third-party software. Let's take the commonly used Total Commander as an example:

Why is there no longer anything in the computer disk?

1. The computer hard disk is broken. There are many reasons for this, such as hard drive errors due to insufficient power supply, virus damage, accidental deletion, etc. Generally, it can be recovered by data recovery software.

Second, the virus hides the file. Some viruses, folder viruses, will hide the real files. Antivirus software often only kills the virus itself, but does not restore hidden folders.

Can be restored manually. Method: Generally, you can try to show all files first to show hidden files.

However, this type of virus usually destroys the mechanism of showing hidden files, so it is usually necessary to use third-party software. Let's take the commonly used Total Commander as an example:

Those with red exclamation marks. Select the Chinese folder, right-click, Properties, and remove the hidden checkbox. 3. At this point, the folders are all restored.

Then install anti-virus software and kill it once.

Summary. Hello, the following answers to your questions; There are generally three reasons for this situation, first, we use some computer shortcuts, which makes it conflict with the local disk of the machine, which will cause the local disk to be missing. Second, there is a problem with our computer's hard drive.

Third, the right mouse button has the function of hiding the driver name, we may hide it when using the computer, these three situations are difficult for us ordinary people to solve, I can't see the disk after opening my computer.

Hello, the following answers are made to your question of opening pants; There are generally three reasons for this situation, first, we use some computer shortcuts, which makes it conflict with the local disk of the machine, and the pure game will cause the local disk to disappear. Second, there was a problem with the hard disk of my computer.

Third, the right mouse button has the function of hiding the driver name, we may hide it when using the computer, these three situations are difficult for us ordinary people to solve, related information; :The computer disk is gone,How should Wang Kai regret set up: 1、Windows2000 and XP,These two systems have the following disk management functions,First of all, we click to open it in the performance week of the control panel,Then go to view the disk management items,You will find the local disk partition and usage。

2. If the local drive is hidden, although we can't see the disk that is trapped, but it can still be found in the computer management, and then we will continue to recover, and we change the name of the drive and the way, and then click Add in the dialog box of the change, and the disk you need can be added.

The solution to the missing disk of the Windows 10 system computer.

The disk of the Windows 10 system computer disappears, there may be the following two situations: one is that the computer has two or more systems installed, and when one system is started, the disk of the other installed system is hidden.

For example, my computer has two hard disks installed, one is a 1T main hard disk, installed with Windows 10 and upgraded to 1803 system; Another 500GB hard disk, with two Windows 10 systems installed, D drive: 17639 system, C drive: 17133 system (in a computer with multiple systems, which system is booted, the disk is the system disk - C:

disk). When booting Windows 10-17133, the E: disk of the 1803 version 1803 installed on the main hard disk disappears.

Solution: Right-click on the system desktop This computer - Management - Disk Management, in the corresponding right window, we found that the disk symbol of the win10-1803 system disappeared;

Right-click win10-1803, and click in the right-click menu: change drive letter and path;

In the pop-up dialog box to change the drive letter and path of win10-1803, click: Add;

In the Add Drive Letter or Path dialog box that continues to pop up, you can see that you can assign: the following drive letter - e, click: OK;

Back to the computer management window, we can see that the drive letter of the system disk installed win10-1803 is: e;

Restart Explorer, we can see that the disk E: of the Win10-1803 system has been restored.

Another form of Windows 10 system computer disk going missing can be a virus intrusion that changes the settings in the Group Policyr.

For example, a few days ago, when the computer was turned on, it was found that the d: disk disappeared, but in the disk management of the computer, it was found that the drive letter symbol of the d: disk existed and did not disappear.

In the local Group Policyr window that opens, go to: User Configuration - Administrative Templates - Windows Components - File Explorer, find and left-click in the right window corresponding to File Explorer: Hide these specified drives in My Computer;

In the Hide these specified drives from my computer window that opens, we can see that the running status is: Enabled, select one of the following combinations: D drive only;

So, in Explorer, drive d: is hidden.

Click Not Configured or Disabled, and then click: Apply - OK;

Hide these specified drives in my computer that are not configured.

Restart Explorer and we can see that disk d: has been restored to display.