The wok has been used for a long time, and there is a layer of oil stains at the bottom of the pot,

Nowadays, we all know that it is unhealthy to eat too much takeaway, so many people will cook at home, and people who often cook will find that if the pot for stir-frying at home is used for a long time, there will be a layer of oil stains at the bottom of the pot, and there are 3 ways to remove this layer of oil stains, the first is to remove it with a special kitchen cleaner; The second is to use an iron brush and dish soap to brush off little by little; The third is to soak it with baking soda plus dish soap and salt for a period of time, which can also remove the oil stains at the bottom of the pot, but I think that everyone usually washes the pot when they usually use it, and naturally there will be no oil stains to deal with.

1. The stir-fry pot has been used for a long time, and there are three ways to remove a layer of oil stains at the bottom of the pot, the first is to remove it with a professional kitchen cleaner.

I have bought several kinds of kitchen detergents, and found that their decontamination strength is relatively strong, even if the stubborn oil stains at the bottom of the pot can still be removed relatively cleanly, the specific usage is to spray the detergent evenly on the bottom of the pot where there are oil stains, and after standing for ten minutes, wipe the oil stains with a rag and it will be gone.

Second, the second is a more crude method, which is to use an iron brush and dish soap to brush off little by little, which saves money but is very tiring.

There is also a more crude and money-saving method is to use a steel wool ball or an iron brush dipped in dish soap, a little bit to clean up the oil stains at the bottom of the pot, but this method is time-consuming and very tiring, and the advantage is that it can be cleaned relatively clean, not only no oil stains, but also some black foundations will not be there, tired, generally do not choose this method.

3. Finally, you can use baking soda, dish soap and salt to remove the oil stains on the bottom of the pot.

The last method is to mix baking soda with dish soap and salt, then add warm water, soak the pot in water for half an hour, and then brush it with a steel wool ball a few times, and the bottom of the pot will look new.

One is to clean with dish soap, the second is to heat the pot for cleaning, and the third is to add toothpaste and steel wool balls for cleaning.

The method is to soak the bottom of the pot in the solution of white vinegar for a period of time, and then wipe it clean with a scouring pad or a cleaning tool with friction.

When you clean the oil at the bottom of the pot, you can mix a little edible salt in the detergent.

This quickly dissolves the oil stains on the bottom of the pan.

It is best to submerge the grease in the pot with water, heat it with fire, add a few drops of the utensils and wash it clean, soak it for 1 to 2 hours or a little longer. In this way, the oil scale that is too thick after heating and soaking will naturally melt, and it will be removed with a spatula, and then cleaned with a steel wool ball. Removing the old grease and dirt sticking to the pan has been cured over time, and it is ineffective to wash and wipe directly with water and detergent.

So it needs to be melted first and then washed. In fact, it is very simple, only three materials: baking soda + dish soap + plastic wrap.

If it is an iron pot, you can soak it with baking soda and white vinegar and an appropriate amount of salt, and then brush it with a steel wool ball. The stainless steel pot is first scalded with boiling water, and then used stain remover to remove grease. First use a shovel to shovel off the thick grease, then put it on fire to heat it up a little, put it on the clean, and wipe it off with a steel wool ball.

It is very difficult to clean up the grease in the pan for a long time, it is best to use a kick knife to scrape it off if it is too thick, and the thickness is small and can be wiped off with a steel wool ball. At this time, we can add some "table salt", because salt can clean up some stubborn substances on the wok, and can also help the woks to "beautify", and the oil pot can become bright and new.

This problem is very simple, the simplest edible alkali, decontamination powder heating water can be done, and there is a certain treasure on the special liquid to remove oil smoke, the effect is also good. It is said on the Internet that I use dish soap and vinegar and laundry detergent, but I don't know if it will be neutralized first, but I haven't used it. Dry burn directly on the stovetop, burn an open flame until it burns out, and then scrub with a steel wool ball.

But pay attention to fire safety and don't take the drain. Put it on the fire first, feel it burned red, take it down, gently tap the bottom of the pot with a small hammer, whether it is the grease at the bottom of the pot or the grease inside will fall off due to the vibration and loosening, and then clean it with dish soap when the pot cools. It is best to apply an oil layer to protect it after washing.

The bay window with steps is the real bay window, the floor-to-ceiling bay window is a fake bay window, the real bay window generally extends outward without landing, so in general, it is not included in the construction area, and the fake bay window is on the ground will be included in the construction area, the real and false bay windows also have their own benefits, everyone can come according to their preferences when choosing a house.

Put baking soda and vinegar together, they have a certain cleaning effect, they can soften the oil stains at the bottom of the pot, and then you can wipe it with a sponge, put some salt in the bottom of the pot, and you can clean it up.

You can use some baking soda and detergent to wash off the grease stains on the bottom of the pan, especially baking soda with white vinegar is a good way to do it, and it is also very clean.

Pots and pans are essential tools in the kitchen, we often spend a lot of time to choose good-looking pots and pans, but after use, we will find that many pots are easy to burn, or black after a few uses, how can they not be cleaned, what to do.

No matter what material the pot is, if there are burnt marks on the surface of the pot, you should soak it in water immediately to soften the burnt ingredients on the surface, and then brush it; If it is an aged scorch mark on the bottom of the pan, you can use baking soda or white vinegar to help remove the scorch marks.

Method 1 to remove scorched pots

Steps: Take the kraft paper and cut it into an appropriate size, then let the kraft paper be dipped in white vinegar, brush the burnt part of the bottom of the pot with the vinegar-soaked kraft paper until it is clean, and then wash it with water.

Method 2 for removing scorched pots

Directions: Pour a little more water into the pan and add 1 tbsp of baking soda. Bring the water to a boil over low heat, mix the baking soda and cook for 1-2 minutes, turn off the heat and let it sit overnight, then scrub it off with a brush or sponge.

Can. Tip: This method is also suitable for cases where there are burn marks on the surface of the pot and there are still marks after soaking in water. Baking soda and water until slightly thick and over the burnt. If it is non-sticky, scrub it with a soft sponge.

How to remove water stains from pots.

If the pot is not wiped dry immediately after cleaning, it is easy to rust spots after a long time, and water stains will appear, and it is not easy to remove after a long time, you can use natural materials to help remove water stains on the pot.

Rusty steel pot Add about half a pot of water to the larger pot, and put in some pineapple skin, then put the smaller pots one by one, heat and boil them on the stove for a while, and wait until they are cooled and take them out, you can find that these pots are as bright as new. However, it should be noted that if it is a stainless steel tableware with a wooden handle or a plastic handle, it should not be steamed or scalded in boiling water, so as to avoid the expansion and damage of the wooden handle or plastic handle due to heat. Pineapple skin boiled stainless steel pot stainless steel pot is easy to stain black scale, difficult to scrub clean, now as long as the larger pot at home add water, put in some pineapple skin, and then put the smaller pot all in, boil for 20 minutes, wait for cold to take out, all bright as new!

Boil onions in water to remove scorch marks Once the aluminum pot is charred, put an onion and a little water in the pot and boil it, and soon all the char will float! Toothpaste to clean the refrigerator and electric pot If the refrigerator and electric pot at home are white, if they turn yellow after a long time, don't try to squeeze some toothpaste and scrub gently when cleaning, which will make you unexpectedly white and shiny Stainless steel pot Add a larger pot with about half a pot of water, and put in some pineapple skin, and then put the small pots in one by one, heat and boil them on the stove for a period of time, and wait until they are cooled and take them out, you can find that these pots are as bright as new. But it should be noted that if it is stainless steel tableware with a wooden or plastic handle, it should not be steamed in boiling water

Burn to prevent the wooden or plastic handle from expanding and being damaged by heat. Pressure cooker If you find that there is dirt left on the pressure cooker, you can cut the used toothpaste skin along one side, hit it flat with a hammer, and keep the remaining toothpaste on it, then wipe the surface of the pot directly with the moistened toothpaste skin, and finally rinse the toothpaste and dirt with clean water. You can also apply a little vinegar to the stain, wait for a while, and then scrub it with water.

Aluminum pan The surface of the aluminium pan is prone to black scale, which can be removed with the fruits and vegetables we have bought. For example, the most common tomatoes, first put a few tomatoes in the aluminum pot to cook for a while, and then use the soup from the boiled tomatoes to clean the black scale on the aluminum pot. In addition to tomatoes, fruits such as lemons and cucumbers can also play this role.

Iron pot After the iron pot has been used for a long time, it is more likely to produce musty smell, and the leftover tea bags can be used to remove mold. First, heat the pan on the stove and dry it, then evenly coat the inside and outside of the pan with some salad oil, and then put a few dry tea bags in the pan to prevent and remove mold. In addition, you can also add water to the iron pot and then put some fresh leeks, and gradually warm, and at the same time use a vegetable spatula to press the leeks in the iron pot and wipe the bottom of the pot, and soon remove the rust.

Casserole You can pour some rice soup into the pot and soak it to heat it, and then use a brush to brush the dirt in the pot.

Rinse with clean water. If the casserole is stained with oil, you can use the leftover tea residue to wipe the surface of the casserole several times to wash off the grease; In case you don't happen to have fresh tea residues, you can soak them in dry tea grounds with some boiling water for a while, which will also be able to wipe off the grease.

In the dry pot state, put the iron pot on the gas stove and burn it on a large fire, **black grease and dirt will be burned again**, burn for a few minutes and you will find that the black smoke begins to whirring, and the flames are getting more and more vigorous, which means that the bottom of the pot is indeed a lot of grease, at this time, continue to burn until the flame becomes smaller, and the pot wall is a little whitish, and then continue to burn other parts.

After burning, with the help of a sharp kitchen knife or shovel, shovel down the black ash burned on the bottom surface, if it is easy to shovel, it means that it has been burned in place, if the shovel is still very difficult, you can burn it a little.

Simply shovel the black ash, at this time you can already clearly see the changes in the pot, at this time with the help of dish soap to start washing with water, the connection between the pot and the handle is the easiest to hide oil, here put more dish soap with a steel wool ball brush, it is also easy to brush clean.

Simply brush the pot and wipe it dry, and if you see rusty areas, you should focus on it. If there is too much rust, it will hurt the pot very much. In the dry pan state, sprinkle some salt on the rusty part, rub the rusty part with potato slices, the salt is granular, which can increase friction, and the potato slices contain more starch, which can dilute the rusty part, and then rinse after wiping, at this time you will find that the rust has been removed.

Soak it in dish soap first, then scrape it with something made of iron to get rid of the grease stains.

With heavy oil, it is particularly easy to use, and it will be no longer after spraying for a while.

It really works with oil stains.

Caustic soda specializes in removing dirt.

It will become like this after a long time, it is really difficult to deal with, there are all kinds of grease removal on the Internet, I haven't tried it, I don't know how effective it is.

Knife scraping: first soak the pot in cold water, then turn the pot upside down, and finally use a knife to cut off the grease at the bottom of the pot. White vinegar cleaning:

Pour the white vinegar into a large basin and place the pot in the basin. After soaking for 1 hour, you can use something with moderate hardness and softness to wipe it vigorously. Wash with hot soapy water:

Prepare a thick basin of hot, soapy water and place the pot in it to soak; Soak for more than 1 hour, then scrub with a coarse cloth. <

1. Scrape off the knife: first soak the pot with cold water, then turn the pot upside down, and finally use a knife to cut off the grease at the bottom of the pot.

2. White vinegar cleaning: pour the white vinegar into a large basin, and then put the pot into the basin. After soaking for 1 hour, rub vigorously with something moderate to soft and hard.

3. Hot soapy water cleaning: Prepare a pot of thick hot soapy water and put the pot into it to soak; Soak for more than 1 hour, then scrub with a coarse cloth.

The method is as follows: 1. First check the dirt and dust at the bottom of the pot.

2. Then take a few hawthorns and put them in the pot for later use.

3. Next, you can pour a suitable amount of water into the pot.

4. Then boil the hawthorn water in the pot.

5. Keep the hawthorn water for a few minutes after boiling, the acidity of the hawthorn water can effectively remove the dirt at the bottom of the pot.

6. Next, you can pour out the hawthorn water in the pot.

7. Then rinse the pot again with water to seep into the Zen.

Remove the thick limescale from the inside of the pot.

Pour white vinegar and water into the pot at a ratio of 1:2 (250 ml of white vinegar is enough, that is, half a bottle of white vinegar bought from the supermarket is enough for one use.) Power off after boiling.

Soak for more than 2 hours. If it is a stainless steel pot, it is best to use this method at night before going to bed, after boiling, it can be left to soak overnight, and then pour out the vinegar water in the morning. After washing it several times with clean water, the pot is completely clean. <>