Why does laundry detergent wipe the floor tiles turn white and foggy, and how can they be restored

How to clean the fog of floor tiles.

There is wax on the surface of the floor tiles, and there will be fog on the ground after wiping the floor tiles, so it needs to be waxed.

1. Freshly laid floor tiles.

There is a layer of protective wax on the surface of the floor tiles, so there will be fogging on the ground after wiping the floor tiles. Or you can wipe it with dry laundry detergent and a dry rag.

2. The floor tiles are not bright after wiping.

It may be because the tiles are not cleaned when they are usually cleaned, resulting in stains accumulating on the surface of the tiles, so the tiles lose their luster. When you clean the tiles, you can exchange water, white vinegar, soap powder, alcohol, and edible alkali according to a certain proportion, and then use it to wipe the floor tiles; Or buy a special tile cleaner for cleaning.

How to clean the fog of floor tiles. Floor tile cleaning tips.

on the Internet, invaded and deleted).

3. The floor tiles are not bright and foggy after wiping.

Because the surface of the tile is brushed too vigorously during the daily cleaning process, the glaze of the tile is damaged, if the home is laid with polished tiles, you can ask professionals to polish and polish; If the surface of the tile is foggy, it may also be due to the indiscriminate use of detergents, etc., resulting in the tile wax layer being damaged.

4. Floor tiles need to be cleaned and maintained daily.

It is best to use a vacuum cleaner or other products to clean the surface of the tile every other day; Usually you can use soapy water and other cleaning tiles; The gaps in the tiles can be cleaned with baking soda and white vinegar; If there are scratches on the surface of the tile, such as serious scratches, you can apply it with a brush dipped in the repair agent, and then apply it once after 30 minutes, and repair it again after the repair agent dries.

How to clean and maintain floor tiles.

1. Daily cleaning.

Only the most basic daily cleaning can effectively extend the service life of the tiles and maintain a good gloss for a long time. The focus of daily cleaning is to remove dust, if it is a floor tile, you can use a vacuum cleaner to vacuum the dust every day, or use a slightly damp mop to mop the dust off the floor.

How to clean the fog of floor tiles. Floor tile cleaning tips.

on the Internet, invaded and deleted).

2. Stain cleaning.

If there are water stains on the floor tiles or accidentally dumped liquid with pigments, they must be cleaned in time, otherwise the pigments may penetrate into the inside of the floor tiles and cause the floor tiles to bleed. For these stains, you can use sodium hydroxide or potassium bicarbonate solution to clean, pour an appropriate amount of liquid to the stain, then scrub repeatedly, and finally wash with water.

3. Wax regularly.

Floor tile waxing can make the floor tiles more shiny and more beautiful, and for example, it can also form a protective film on the surface of the floor tiles, which can avoid stains or scratches directly on the surface of the floor tiles. It is recommended to wax every 3-6 months.

The main reason why the floor tiles are not bright and foggy after wiping is whether the polishing and waxing of the surface are worn. So it doesn't look bright, the general tiles are very bright and thorough, if it is the manufacturer's problem, then you can find the manufacturer to re-wax the tile. After waxing, it will be shiny and transparent.

If it is caused by improper maintenance by yourself. Then it is necessary to find out what the cause is, whether it is a stain or improper cleaning, and how to make the tiles brighter.

If you choose polished tile products, because the surface will be polished and waxed during the production process, the appearance will be more bright and transparent, but the polished tile will accidentally scrape or damage the wax layer on the surface of the tile during transportation and when the plastering master paves it, and the surface of the tile will not look bright. If this is the reason, you can re-contact the merchant and do tile waxing, and you can restore the aesthetics.

1 Caused by indiscriminate use of detergents.

There are two kinds of detergent products on the market, acid and alkali, and the range of use is strictly controlled. In particular, high-strength products are very corrosive, making the surface of the tile tarnished and easy to dirty.

2 Stains.

The reason why the tile is not bright may also be caused by stains, usually when we clean the tile, we often leave some water stains on the surface of the tile, which will accumulate on the tile for a long time, so that the tile loses its luster, so when cleaning the bathroom, be sure to wipe the surface stains clean.

3 Caused by the texture of the tile.

If you find that the tile is still dull after cleaning and drying, but from other angles, the surface of the tile is still shiny, it may be because the texture of the tile has changed, so that the surface of the tile has a layer of white mist.

How to brighten tiles.

1. The daily cleaning of ceramic tiles can be cleaned with detergent, soap, etc., which can make the surface of the tile brighter.

2. To clean the tile, you can also use soap and a little ammonia and turpentine to mix liquid, which can also make the surface of the tile more shiny.

3. Tiles also need to be waxed regularly, especially polished tiles, which should be waxed regularly, and the time interval should be 2 to 3 months.

4. The stains between the bricks and the bricks can be removed with toothpaste, and then brush a layer of waterproof agent on the gaps to prevent the growth of mold.

5. Tea, coffee, ice cream, grease and other pollutants on the surface of the tile can be cleaned with sodium hydroxide or potassium bicarbonate solution.

Generally, if you clean it correctly, the floor tiles are bright and thorough after cleaning, if it is still not bright after scrubbing, see if the wax on the surface is worn out. Re-waxing restores the brilliance. If it's a quality problem, go straight to the manufacturer.

Daily cleaning is also important, do not use the wrong cleaning agent, the chemical reaction can cause damage to the floor tiles.

1. Laundry detergent is alkaline, so the floor tiles are whitish, and they can get better after a long time.

2. Laundry detergent is an alkaline synthetic detergent, the main ingredient of laundry detergent is anionic surfactant: sodium alkylbenzene sulfonate, a small amount of nonionic surfactant, plus some additives, phosphate, silicate, yuanming powder, fluorescent agent, enzyme, etc., made by mixing, spraying and other processes, and now most of them use 4A fluorite instead of phosphate.

3. Floor tiles, also known as floor tiles, are a kind of ground decoration materials. It is made of clay firing. A variety of specifications.

The quality is firm, the bulk density is small, the pressure is wear-resistant, and it can be moisture-proof. Some are glazed and have a decorative effect. It is mostly used for the ground and floor of public buildings and civil buildings.

Laundry detergent residue.

Wipe the floor tiles, it doesn't matter if there is a little corrosion. But don't use powdered detergents, which are prone to residues. It would be better to use a liquid one.

Wipe it with water a few times to recover basically.

If it really doesn't work, wipe it with a dry cloth dipped in a little cooking oil. Note that there should not be too much oil, it will become slippery.

Experienced workers, wiped with an oil towel, there will be no residue.

Why do you use laundry detergent?! Supermarket to buy special, I saw a while ago that Langqi has a special household cleaning products for sale.

Laundry detergent is alkaline, so the floor tiles are white, and they will get better after a long time.

Laundry detergent residue.

Wipe the floor tiles, it doesn't matter if there is a little corrosion. But don't use powdered detergents, which are prone to residues. It would be better to use a liquid one.

Wipe it with water a few times to recover basically.

If it really doesn't work, wipe it with a dry cloth dipped in a little cooking oil. Note that there should not be too much oil, it will become slippery.

Experienced workers, wiped with an oil towel, there will be no residue.

In my opinion, the main reason is that the quality of the ceramic tile is not good, and the moisture content of the generally bad tile is relatively high, and it is easy to absorb water and color.

The floor tiles are gray and misty, and they can't be polished no matter how they are wiped, which is the phenomenon of tarnishing caused by the daily friction caused by people often walking around on it, and of course, there are also strong acids and alkaline detergents that will also cause tart loss on the surface. At present, ceramic tiles find a lot of this problem, the best way is to use nano silicon products through physical polishing for glossy repair, now there is a product on the market called Zhenjieshi nano repair paste, this product is very effective for the ground tile loss repair luster, the principle is through the friction of the machine's rotation torque to heat the nano molecules evenly distributed on the surface of the tile, so that the tile fully absorbs the nano silicon, so as to achieve the role of defective repair, but also has the effect of making the tile brighter, more stain-resistant, and good anti-slip effectIt is easy to clean, it will not cause any adverse effects on the glaze layer on the surface of the tile and will not change the original color, and this product will not have any effect on the surface of the tile without flaws, nor will it damage the tile surface twice, so it is a very safe product.

A layer of glaze is attached to the surface of the floor tile, and the glaze itself is textured and has gaps that are easy to hide dirty things, and it is not clean to wipe in place or wipe with an unclean cloth for a long time, which is determined by the characteristics of the glaze.

The way to keep the floor tiles clean is to wipe the tiles clean with laundry detergent, alkali surface, and detergent, and the light is as good as new, the method is very simple, wipe these materials with a wet scouring pad. This method will do the trick once a week.

Use the newspaper dipped in some soapy water, not too much, a little, and then just wipe it.

This is a way to get bad windows, I don't know if it's useful.

The white spot is the laundry detergent after the water has evaporated, just wipe it with water.

It is a solid laundry detergent that crystallizes after the water evaporates and dries.

It's laundry detergent, just drag it with water.

The floor has acidic substances, and the laundry detergent is alkaline. When alkaline substances and acid substances are combined, there will be chemical responses, and they will appear.

It means that the floor of your house is very dirty...

You may use vitrified bricks, vitrified bricks are fired from quartz sand and mud in a certain proportion, and then polished but do not need to be polished, the surface is as smooth and translucent as a glass mirror, which is the hardest of all ceramic tiles. Vitrified tiles are superior to ordinary glazed tiles, polished tiles and general marble in terms of water absorption, edge straightness, bending strength, acid and alkali resistance, etc. But the vitrified brick is not perfect, its defect is that after polishing, the pores are exposed, dust, oil, etc. are easy to penetrate, if this is the case with your floor tiles, it may be caused by the defects of the brick itself, you can use a mop dipped in diluted 84, comprehensive cleaning, so as to avoid local spots.

The main ingredient of oil fume cleaning agent is strong alkali, which has strong oxidizing properties.

will be gray floor tiles.

The gray component in the bleaching, but this bleaching effect is not long-lasting and stable, and will slowly return after a period of time. However, this process is relatively long, it takes half a year or a year or even longer, and gradually it will return to its original color.

This situation is irreversible! It is recommended to change the brick again!

It is estimated that there is nothing that can be done about this, because it has been faded by strong alkaline chemicals, and it cannot return to its original color, so if you really mind, you can only change the floor tile.