How to use and install a pipe cleaning machine

1.A single three-pole plug and socket with good protective grounding must be used.

2.When the pipeline is blocked, it is easy to cause water accumulation on the construction site. Use pipes to clean in stagnant water and humid environments.

3.Place it in a dry place where there is no standing water. Operators wear insulated gloves, shoes, or stand on an insulating mat.

4.Please use fuses with rated voltage and standard capacity, and do not use metal wires and other substitutes.

5.Do not unplug the power cord when moving the machine or unplugging it.

7. In narrow places or special environments (such as boiler rooms. Pipeline. Wet areas, etc. )。

8.Non-professionals are not allowed to disassemble and repair the product without authorization.

9. After operation, the power supply should be cut off first, and then the on-site cleaning and machine maintenance should be done.

10. When using and wiping the machine, it should prevent water from entering the main engine. A machine that accidentally gets into the water will not.

It must be used.

11. It is strictly forbidden to use faulty machines to operate.

Summary. Hello dear, I am honored to answer for you, how to use and install the pipe cleaning machine: safe operation and precautions must use a single three-pole plug socket with good protection grounding.

When using the pipeline cleaning machine in a waterlogged and humid environment, corresponding safety protection measures should be adopted, such as: using a leakage safety device, and placing the host in a dry position without water accumulation. The operator wears insulated gloves, wears insulated shoes or stands on an insulating mat.

Please use a fuse with a rated voltage and standard capacity, and do not use a substitute such as metal wire. Do not pull the power cord when moving the machine or unplugging it. In cramped places or special environments such as boiler rooms.

inside the pipe. Wet areas, etc.), there should be someone to supervise the operation. Non-zhuanye personnel shall not disassemble and repair this product without authorization.

After the operation, the power supply should be cut off first, and then the on-site cleaning and maintenance of the machine should be done. When using and wiping the machine, water ingress inside the main unit should be prevented. The machine that accidentally enters the water should not be used until it is dried.

It is strictly forbidden to operate with faulty machines.

Hello dear, I am honored to answer for you, how to use and install the pipe cleaning machine: safe operation and precautions must use a single three-pole plug socket with good protection grounding. After the pipeline is blocked, it is easy to cause water accumulation in the workplace, and when using the pipeline cleaning machine in a waterlogged and humid environment, the corresponding safety protection measures should be used for closure, such as:

Use a leakage safety device and place the main unit in a dry location without stagnant water. The operator wears insulated gloves, insulated shoes or stands on the edge mat. Please use a fuse with a rated voltage and standard capacity, and do not use a substitute such as metal wire.

Do not pull the power cord when moving the machine or unplugging it. In cars such as narrow places or special environments (such as boiler rooms. inside the pipe.

Wet areas, etc.), there should be someone to supervise the operation. Non-zhuanye personnel shall not disassemble and repair this product without authorization. After the operation, the power supply should be cut off first, and then the on-site cleaning and maintenance of the machine should be done.

When using and wiping the machine, water ingress inside the main unit should be prevented. The machine that accidentally enters the water should not be used until it is dried. It is strictly forbidden to operate with faulty machines.

Use and operation method "Wangu" brand series of pipeline cleaning machines, all of which use flexible flexible shafts, with different shapes of drilling tools, use the combined effect of fast rotation and manual propulsion or automatic feeding, to clean all kinds of blockages in the pipeline. As long as you choose the model well, operate it step by step according to the requirements, and add your skillful skills in cracking locust branches, the pipeline dredging will be easy. After the pipeline is dredged, the main engine can be operated to drive the flexible shaft to continue to run for a few minutes, so that the flexible shaft can further remove the dirt on the pipe wall, and at the same time, the effect of water flushing is better.

1. Check the pipeline: check the position of each outlet of the tap water pipeline, the main valve switch, the position of the washing machine, the position of the toilet, the position and number of the water heater, check the use and quality of the tap pipe interface and faucet, etc., and close it.

2. Dissolve citric acid: connect the equipment to the water pipe, close the household facilities with water inlet function, such as: remove the water heater and connect it with the equipment, pay attention to whether the water heater uses a triangle valve when connecting, if the triangle valve is used, it needs to be removed and directly connected.

3. Connect the pipeline for side leakage: set the air pressure, close all faucets and use the leak detection function to detect whether the water pipe is leaking. Press the leak detection button to fill the pipeline with gas, and after the alarm sounds, keep it for 5 minutes to observe whether the value of the output parameter table continues to decline, if it continues to decline, it means that the water pipe is leaking.

After the leak detection is completed, slowly open the faucet at the farthest end of the device to drain the pressure in the pipe.

4. Pumping and soaking: Open the faucet at the farthest end of the equipment, open the faucet, turn on the pumping function, open each faucet in turn to let the lemonade in, and the faucet must be closed after all the faucets are played. Wait for a while.

5. Pulse cleaning (citric acid cleaning): Open the faucet at the farthest end of the equipment, open the faucet, turn on the pulse function, flush the citric acid and sewage (about one minute), open each faucet in turn to let the lemonade play, and the faucet must be closed after all the faucets are played.

6. Clean water cleaning: let the tap water enter the pipeline. Turn on the faucet and start the pulse cleaning function of the device. When the sewage discharged from the faucet becomes clean water, use the pause button to pause the device and turn off the faucet.

7. Each step should be strictly controlled until the dirt on the inner wall of the water pipeline is cleaned. Restore all connections, test all faucets, put away equipment and accessories, and carry out hygienic cleaning.

A single person can operate it, first turn on the water source to make the other end of the flexible shaft spray water, and then make the main unit work.

After the main engine is energized, step on the foot switch, the motor starts to work, if the hose is found to beat violently or stuck during cleaning, you should step on the foot switch in time to stop the motor from working, then you need to pull the hose out a little, then start the motor, and then push forward, reciprocating, until it can pass smoothly.

Precautions. 1.Ultrasonic cleaning of pipelines can achieve high-efficiency cleaning, mainly because the ultrasonic cleaning machine is to amplify the electrical power of the vibration signal higher than the frequency of 20kHz through the ultrasonic generator, and then convert the reverse piezoelectric effect of the ultrasonic transducer (vibrating) into high-frequency mechanical vibration energy through the radiation in the cleaning liquid, so that the cleaning liquid molecules vibrate and produce countless tiny cavities and bubbles;

2.The ultrasonic propagation direction is formed and grows in the negative pressure area, and quickly closes in the positive pressure area to produce thousands of atmospheres of instantaneous high pressure and blasting, forming countless microscopic high-pressure impact to break the scale impurities used for the pipeline and crush them, which is called the "cavitation effect" in the ultrasonic cleaner;

3.The ultrasonic pipe cleaner works on the basis of the "cavitation effect" technology. From the cavitation effect, it can be seen that holes and bubbles are produced by applying high-frequency (ultrasonic frequency) and high-intensity sound waves to liquids.

The spring is plugged in and used directly, and there is generally training.

The water pipe cleaning industry is a project that is more suitable for the public to start a business in recent years, which has also established many water pipe cleaning equipment manufacturers during this time, which has also led to a variety of water pipe cleaning equipment on the market.

When choosing a pipe cleaning machine, you must carefully choose the best one, and the after-sales service is guaranteed, such as the new water is very good and has been widely praised.

As for the key to this problem, how to use the pipe cleaning machine, the new technical teacher of Shui Zhixin will provide one-on-one guidance, including teaching and packing, and the big brand is guaranteed.

If the water dispenser has been used for a long time, a lot of water and alkali dirt will be deposited over time, and if it is not cleaned up in time, it is easy to breed bacteria and viruses. So how do you clean a pipeline machine? Let's take a look.

1. Close the water inlet end (generally used with the water purifier), that is, close the water inlet ball valve.

2. Unplug the water inlet pipe, turn off the power supply, turn off the heating (refrigeration) switch and unplug the power cord.

3. Take the water storage container, place it under the drain (no hot tank, no water tank omits this step), open the drain, discharge the hot tank and the water in the water tank, and close the drain.

4. Take a telescopic bucket to open the water into it, pour in a package of special cleaning agent for hot tanks, connect the water outlet of the cleaning equipment to the water inlet of the machine, turn on the power supply of the cleaning equipment, observe the pressure gauge reading in the cleaning equipment, and turn off the power supply of the cleaning equipment when the pressure gauge reads.

5. Turn on the power switch of the machine, open the heating switch when there is water flowing out of the hot and cold water outlets, and let the cleaning solution heat up until the heating stops.

6. Turn off the heating switch and power switch, unscrew the drain joint at the back or bottom of the machine, remove the drain plug, drain the water inside the machine (pay attention to scalding), connect the ozone outlet of the cleaning equipment to the drain port of the water tank and use ozone sterilization and disinfection (5 minutes), connect the drain plug and drain connector as they are, connect the water source, turn on the power switch, repeat the drain operation several times, wait for half an hour, and the machine can be used normally.

7. Disassemble the back cover plate of the machine, check the entire waterway and circuit, check whether there is any aging of pipelines or lines (such as wire tie breakage, etc.), if there are potential safety hazards, inform the user to stop using, use a multimeter to detect whether there is leakage or leakage hazards, if everything is normal, the inspection is completed, if there is leakage, the user will be informed to stop using, and the after-sales service will come to the door again to maintain the pipeline to avoid economic losses to the user. 8. After the cleaning and testing are completed, the machine will be restored, reconnected to the water inlet pipe, open the water inlet ball valve, and press and hold the hot water outlet button until the hot water outlet can be heated (if there is no hot tank, press and hold the cold water outlet button until the water outlet can be heated).

9. Turn on the steam switch of the cleaning and disinfection equipment, spray steam on the machine panel after the steam comes out, and wipe it with a clean rag to remove the stubborn dirt on the surface of the machine.

10. Take cold water and hot water, observe that there is no abnormal color, and drink without peculiar smell.

11. Clean up the site, sort out the tools, and clean up the user's machine site, (mainly wipe the floor water stains).

Close the main valve of the household water pipe, turn off the household appliances, find the lowest faucet in the house, use a bucket to connect the remaining water in the pipe, and then according to the remaining water to mix food-grade citric acid, according to the ratio of 1 kg of citric acid to 10 kg of water, dissolved in 50-60 degrees of warm water.

Connect the water pipe cleaning machine and the air compressor according to the instruction manual, and connect the pulse pipe with the water pipe.

Leak testing of the water pipeline to confirm that there are no leaks in the pipeline. Then soak in the citric acid solution for about 20 minutes. There is a liquid injection function on the instrument. Fill the liquid and suffice.

After soaking for 30 minutes, pulse cleaning is carried out to clean the dirt from the water pipes. Finally, open the main valve, rinse with clean water, and flush out the dirt in the pipeline.

Precautions. Close the valves of household appliances before cleaning, such as water towers, water heaters, water purifiers, etc.

Pay attention to leak detection before cleaning.

Connect the tubing according to the standard, and soak the citric acid thoroughly.

When the cycle cleaning work, the faucet must be opened one, and it is forbidden to close the operation.

Abstract:Pipe blockage is a common problem in the family, you can use the pipe dredging machine to dredge the blockage, for indoor and outdoor sewage main pipes, toilets, simple silver squatting pits, floor drains, vegetable pools, pools, basins, bathtubs, shower rooms, etc., pipe dredging machine can play a good role. However, it should be noted when using that the pipe cleaning machine is a large electrical appliance after all, and it is necessary to pay attention to safety when using it, including taking corresponding safety protection measures, being supervised, and avoiding the use of fault dredging machine operation.

Let's take a look at how to use the pipe cleaning machine safely. 1. What are the uses of pipeline dredging machines?

Pipeline dredging machine is a mechanical equipment used to dredge pipelines, also known as pipeline cleaning machine, it is very versatile and can be used to clean:

1. Indoor and outdoor sewage main pipelines: It can completely solve the backflow of the bottom sewer caused by various reasons, and avoid the trouble of large cost of plowing and replacing pipes.

2. Toilet dredging: It can dredge the blockage caused by various soft and hard substances (rags, plastics).

3. Pit: Because the pit has been in the pit for a long time, the pipe elbow has produced a thick layer of urine alkali, which slowly becomes 50mm or even 1mm from 100mm, and it will be blocked in serious cases, so it causes the pit to be slow and easy to block, and the use of pipeline dredging machine to clean up can remove the urine alkali.

4. Floor drain and vegetable pool: dredge the blockage caused by various V-shaped and S-shaped floor drains due to debris such as cement, sand or hair falling into the decoration.

5. Pools and basins: dredge all kinds of basins, including V-shaped, S-shaped and other pipes.

6. Bathtub and shower room: dredge the blockage caused by various sundries.

2. How to use the pipeline cleaning machine safely.

Pipeline cleaning machine is a large mechanical equipment, the power is relatively large, in the use of attention to the safety of use, pipeline dredging machine safety operation mainly pay attention to the following aspects:

1. The pipeline dredging machine must use a single three-pole plug and socket with good protection grounding.

2. After the pipeline is blocked, it is easy to cause water accumulation in the workplace, and when using the pipeline dredging machine in a waterlogged and humid environment, corresponding safety protection measures should be adopted, such as: using a leakage safety device, and placing the host in a dry position without water accumulation. The operator wears insulated gloves, wears insulated shoes or stands on an insulating mat.

3. When using and wiping the dredging machine, it should prevent water from entering the host. The machine that accidentally enters the water should not be used until it is dried.

4. The pipeline dredging machine should use a fuse with rated voltage and standard capacity, and no substitute such as metal wire should be used.

5. When moving the dredging machine or unplugging it, do not pull the power cord.

6. When working in narrow places or special environments (such as pot slag furnace room, pipeline, wet area, etc.), someone should be quietly supervised.

7. Non-professionals are not allowed to disassemble and repair the pipeline dredging machine without authorization.

8. After the operation, the power supply should be cut off first, and then the on-site cleaning and maintenance of the pipeline dredging machine should be done.

9. It is strictly forbidden to use the fault dredge machine to operate.