How to adjust the electronic scale of the household human body?

1.Inspecting the electronic scale requires us to ensure that the mechanical part of the electronic scale is not damaged, and the bottom corner must be flat, not tilted, and not shaken. 2.

Calibrate the range, and make the electronic scale accurately measured through calibration. The zero point is first calibrated and then the standard weight is loaded close to full scale to calibrate the range. 3.

Check the scale. Generally, household electronic scales have automatic calibration function. You need to take a look at the settings.

You can also use standard weights to inspect the scale. 4.Check for errors.

This happens as a mistake, a mistake in which the same thing is called out multiple times. The error of the electronic scale should be plus or minus.

1. Confirm whether the battery is charged, check whether the battery power of the electronic scale is sufficient, the battery should be replaced in time when it is out of power, and the insufficient power will also cause the electronic scale to display.

2. Confirm whether it is placed incorrectly, the electronic scale should be placed horizontally on the floor, but if the electronic scale is high and low, or there is an elevation angle with the horizontal plane, it will also lead to inaccurate weighing weight. Before the electronic scale leaves the factory, it passes through the calibration machine on the water platform, and when the customer uses it on the uneven or uneven table, the weighing will be inaccurate. It is best to use it on a relatively flat or level table, and recalibrate the machine in this position, so as to avoid the problem of inaccurate weighing due to uneven table.

In addition, the scale should be placed on a flat and hard ground when used, and there should be no debris under the scale.

3. Confirm whether the standing posture is correct when weighing, confirm whether the standing posture is correct when weighing, and require both feet to stand upright on the electronic scale, and the body should not shake left and right. It is also not possible to weigh on one foot or in a squatting position, which will also lead to inaccurate weighing.

4. Weigh several times to take the average value, and it is best to weigh several times when weighing, and take the average value. In this way, the weight of the scale is more accurate.

5. Confirm whether the maximum weight of the scale is exceeded, and pay attention to the weight, the weight should not exceed the maximum weight of the electronic scale. Exceeding the maximum range will definitely result in inaccurate weighing as well. Moreover, overloading can cause permanent deformation of the elastomer and fatal damage to the scale.

The household electronic scale basically can't be adjusted, there is no way, if it is not accurate, you can remove the battery, see if the 4 bases are unbalanced, readjust the base, install the battery and see if it can return to normal.

1. Step on the electronic scale to check the weight, if it is obviously wrong, you need to reset the electronic scale.

2. Turn the electronic scale over, and you can see the battery compartment on the back.

3. Pull the cover of the battery compartment with your hand to open the cover.

4. After that, pick out a battery slider by hand and stay for more than 30 seconds.

5. After installing the electric inspection and modification pool back, re-believe the non-sensitive measurement, and you can see that the weight is normal.

The adjustment method of the household electronic scale is not allowed as follows:Tool Raw Material: Meiao Electronics Scale.

1. Step on the electronic scale to check the weight, if the obvious hand is not right, you need to reset the electronic scale.

2. Turn the electronic scale over, and you can see the battery compartment of the Zheng Zai department.

3. Pull the cover of the battery compartment with your hand to open the cover.

4. After that, take out a battery by hand and stay for more than 30 seconds.

5. After shouting to put the battery back, re-measure it, and you can see that the weight is normal.

The methods of adjusting the household body electronic scale are: replacing the battery and zero point calibration.

1. Replace the battery: low power may cause the electronic scale to display inaccurately. Check the battery level and replace it with a new compatible battery.

2. Zero point calibration: Many electronic scales have zero point calibration function. When nothing is placed on the scale, follow the instructions in the user manual for zero calibration. This ensures that the scale is displayed as zero when there is no weight.

How to use the electronic scale

1. When weighing, please put the scale on a hard and flat ground.

2. In order to ensure accuracy when using electronic scales, it is best to test whether the power is sufficient before use.

3. There is a toggle switch at the bottom of the scale, the measurement unit can be selected kg or pounds, kilograms will display kg, pounds will display lb.

4. In order to avoid affecting the accuracy of weighing, please do not place the scale on the carpet or soft ground, stand evenly on the scale surface, and keep your body balanced.

5. The feet must be balanced to ensure the accuracy of the value.

6. The most headache of the mechanical health scale is that the pointer will be offset, and it needs to be adjusted frequently to ensure that the pointer is accurate, and it is best to pay attention to the adjustment before use.

7. You may wish to shake a few times before use.

8. After the scale surface is stable, the LCD will display the weight measurement, and the current weight value will appear after the screen value is stable.

9. When the test person can walk down the scale, the LCD screen will return to zero later, and the next weight test can be carried out.

10. When O-LD is displayed, it means overload, that is, the weight has exceeded 150kg. When the person walks off the scale when the overload is overloaded, the scale will be destroyed and can resume normal operation, and the O-LD will automatically disappear.

The inaccuracy of electronic scales for home use is one of the common problems in family life. Generally speaking, the inaccuracy of the electronic scale may be caused by the aging of the stove type scale body, uneven weighing pan, damage to electronic components, battery problems and other reasons.

First of all, the aging of the scale body is one of the main reasons for the inaccuracy of the electronic scale. After a long period of use, the internal components of the electric rental plum scale will deteriorate, resulting in a decrease in its accuracy and inability to accurately measure the weight of objects. In this case, the internal components of the scale need to be replaced, or a new scale will need to be replaced as a whole.

Secondly, uneven weighing pans are also one of the common reasons for inaccurate electronic scales. Due to long-term use and improper placement, the weighing pan may be deformed or uneven, resulting in the weighing pan cannot be balanced after the item is placed, thus affecting the measurement accuracy of the electronic scale. At this point, it needs to be adjusted and repaired, or replaced with a new scale.

In addition, damage to electronic components can also lead to inaccurate scales. The measurement accuracy and stability of an electronic scale are related to the quality and condition of its internal electronic components. If the electronic components are damaged or deteriorated, the measurement accuracy of the scale will be affected.

At this time, it is necessary to replace the electrical concealment sub-component or replace it with a new electronic scale as a whole.

Finally, battery problems are also one of the reasons why electronic scales are not accurate. If the scale's battery is low or the battery is in poor contact, the scale's measurement accuracy will be affected. At this point, the battery needs to be replaced or reinstalled to ensure proper operation of the scale.

To sum up, the inaccuracy of electronic scales may be caused by a variety of reasons, and corresponding solutions need to be taken according to the specific situation. In daily use, it is recommended to pay attention to maintaining the use environment and status of the electronic scale to ensure its normal operation and measurement accuracy.