Should the range hood be wrapped in the cupboard? What are the benefits of doing this?

Of course, the range hood should be wrapped in the cupboard, why do you say so? Because the size of the range hood itself is very large, if it is not wrapped in the cabinet, it will look ugly, we generally see the range hood is a panel of it, it seems to be very technological, exposing its entire part, then it loses the sense of science and technology, the overall look is quite ugly, and the overall decoration of our kitchen is incompatible. And wrapping the range hood in the cabinet, our cabinet can be without tiling, and there is no need to do any treatment, and it saves a lot of money.

The most important thing is that when we design cabinets, we can be neat and whole, and only such a decoration in the kitchen is the best looking. <>

I've never seen a range hood that isn't in the cupboard, so I can't imagine what it would be. In fact, if the range hood is not wrapped in the cabinet, the cost will be even higher, first of all, we have to be neat and good-looking, the position of the range hood is also tiled, and then the cabinet has to be made in the east and west, and there is no way to achieve an overall effect. This feeling is like one tooth missing, which is very abrupt and uncomfortable.

And the biggest benefit, that is, the range hood will have a very obvious shaking situation when it is working, if you don't hide it, it will shake up and give us a very uncomfortable feeling. Because the motors are all in the upper part of the range hood, if we don't believe it, we can open the cabinet door and use the range hood.

Take a look, it's really exaggerated. <>

In general, whether it is for the sake of beauty, tidiness and saving money, from these three perspectives, the range hood must be wrapped in the cabinet. Otherwise, the overall effect is needless to mention, or if you really don't want to use a range hood, you can consider buying an integrated stove.

In that way, there is no need to hide the entire range hood, and it looks very beautiful, the key is that its pumping effect is also great, that is, it is more expensive.

I think it's better not to, because if you smoke in the cupboard, it will make the cupboard very dirty.

Range hood, do you want to wrap it up? Put the range hood.

The benefits of wrapping; Regarding the practice of wrapping the range hood into the kitchen cabinet, many people think that it is only beautiful and generous, and I felt the same way in the past few years, but with the development of daily life experience, especially after living in 2 kinds of houses with and without bags, I found that the benefits of wrapping the range hood are far more than that, and I will talk about my experience below.

What are the pros and cons of wrapping up a range hood? Beautiful and generous; The first range hood is immediately exposed, the upper two sides are empty, and the appearance color of the range hood is generally not unified with the color of the wall cabinet on the side, so it will look contrary to the visual effect. Therefore, from the perspective of beauty and generosity, the appearance of the range hood can echo the overall indoor space of the kitchen after being wrapped, and the actual effect is more airy.

storage and organization; Some people feel that the storage cabinet in this position is not big, it is insignificant, in fact, it is the case for large households, but for the kitchen, this storage space is actually very valuable, because the objects in the kitchen are all relatively fragmented small objects, reasonable planning and design of the space on both sides of the pipeline on the range hood, you can also store and organize a lot of things.

No dust accumulation at the top; If the range hood is not wrapped, the area on the panel of the range hood is a network platform that eats ash, this position is very high, and it can not be wiped normally, waiting for you to clean it, you will find that a very thick layer of dust has already accumulated here, and for a long time under the mixture of kitchen fumes, it will stick to the top and turn black, which cannot be removed!

Blind zone of internal structure.

difficult to remove; Although the range hood is wrapped, the top of the range hood is no longer a service platform for eating ashes, but the small gap between the range hood and the kitchen cabinet will still have a little bit of kitchen fume and dust coming in, which is nothing in the short term, if it is not cleared for a year and a half, it is more cumbersome, and after the locker, the indoor space inside is particularly large, and it is very easy to have blind spots when cleared. Therefore, it may be necessary to clean the internal structure of the wooden cabinet with the range hood every many months.

Yes. Wrapping the range hood will be more beautiful and beautiful, and there are many disadvantages, such as the installation of the cabinet, and there will be oil smoke in the gaps, which is difficult to clean in the later stage, which will lead to a lot of oil smoke on the cabinet door.

Based on my years of experience in cleaning range hoods, to give a suggestion, it is better not to wrap it in. Although it will be greatly improved in terms of aesthetics and the whole space, after a long time, the heavy oil smoke will float in, and it will corrode the circuit after a long time. There will be safety hazards.

It is also inconvenient to clean and replace it in the later stage.

Before customizing the cabinets, reserve the installation location, size, and style of the range hood with the cabinet merchant, and reserve the location of the pipes in the range hood. There is no certain requirement for the installation sequence of the flask and the range hood, which can be installed together but there is a point to reserve the position of the flue first, and the flask can also be installed first and then the range hood, so that it is convenient to coordinate, and there will be some problems in the installation process. The pipe of the smoke lamp black machine is too ugly to be exposed outside, and the smoke exhaust outlet of some kitchens is above the range hood, so you can buy a smoke exhaust pipe"Humility"Decorative cover.

Although the decorative hood makes the smoke lamp black machine improve the overall aesthetics, but"Treat the symptoms but not the root cause"The color and color of the shell of the smoke lamp black machine are inconsistent, and the serious color will make people feel abrupt, and it is beautifying to wrap it with a wall cabinet so that it rises. Install the range hood first, for fear that the size of the range hood is not suitable; The best choice is to install the smoke machine at the same time, figure out the size and model of the smoke machine, and report to the cabinet dealer, such as installing the cabinet and the smoke machine at the same time, and solve the problem in person.

The light black machine is installed on the upper right side of the radiator, and the radiator should be on the same axis. Usually the height between the bottom of the top draft range hood and the desktop is 65 to 75cm, while the distance from the bottom of the side draft range hood to the desktop is 35 to 45 cm, so the installation position of different brands of range hoods is also different. If you choose to install the cabinet first, you need to reserve the position of the smoke machine in advance, and the size should be accurate.

Otherwise, when it is installed, it will be found that the size of the range hood is large, and the installation card is very troublesome, and if the size is small, the ash is easy to affect the appearance.

After the preparation is done, the first thing to do is to determine the installation height of the range hood. Generally, the height of the lower end of the upper range hood to the range hood is 65-75 cm, we use a ruler to measure the installation height of the range hood and mark it. Next, we will remove the baffle from the black lantern machine, place it in the pre-installed position, and mark the location of the drilled holes.

Unscrew the cover and screws of the grille and remove the cover and grille. Then unscrew the fastening screws of the wind wheel and take out the wind wheel. Soak the removed parts in warm water with a neutral detergent, wash them with a soft cloth and wipe them dry.

Scrub the dirt in the inner cavity of the volute with a soft cloth with a small amount of warm water with a small amount of neutral detergent, wash it with a soft cloth and wipe it dry; Assemble the above parts in the reverse order of disassembly; After installation, check whether the oil circuit of the appliance is smooth and whether the sealing ring on the volute can be sealed

Do not wrap the range hood in the cupboard. The smoke machine is usually made of stainless steel, then stainless steel is definitely better than wood to do cleaning, you think about cleaning during the New Year's holidays, if the smoke machine is wrapped, you have to open the cabinet door to clean the inside, and if the wood is not very resistant to oil stains, it is very easy to yellow.

When the range hood is installed, the installation service will be provided on the supply of the range hood, and I personally think that the range hood is best not to be wrapped in the cabinet, so that it is inconvenient to clean.

In the process of installing the range hood, you should want to install it, the specific installation location, then punch holes, and finally fix it on the wall. Choose the right position according to the style of the range hood.

The range hood should not be wrapped into the cabinet, because the practicability of wrapping it is not high, it will increase the decoration cost, and it is inconvenient to clean up in the later stage, which will affect the normal heat dissipation of the range hood.

Many people will choose to install stainless steel cabinets when decorating the kitchen, when installing this kind of cabinet, whether the range hood should be wrapped into the cabinet but there are a variety of different sounds, I personally think that the range hood should not be wrapped in the cabinet, because there are many disadvantages of choosing this decoration method, it will only make the kitchen look neater and have a better decoration effect, but from the practicality and other aspects, there is no need at all.

First, the practicability is relatively poor

When the kitchen is equipped with stainless steel cabinets, the range hood is wrapped in the cabinet, and the practicality is not large, because the range hood room can be used to place some daily necessities, but the position of this cabinet is relatively high, ordinary housewives, in the case of normal standing, it is difficult to take out or put the items inside, its use is more inconvenient, from this point of view its practicality is relatively poor, so there is no need to wrap the range hood into the cabinet.

2. Increase decoration costs

When the kitchen is equipped with stainless steel cabinets, there is no need to wrap the range hood in the cabinet, because this will increase the cost of decoration, if you want to wrap it in the cabinet, you need to customize a separate cabinet, now the custom cabinet is relatively high, especially the choice of stainless steel cabinets, up to hundreds or even thousands of yuan per meter, in order to increase the decoration cost of the range hood package is not necessary.

Third, it is not convenient for later cleaning

It is not convenient to wrap the range hood in the cabinet for later cleaning, although at the beginning I feel that the range hood will not be contaminated with too much oil stains in the cabinet, but after a long time, the top of the cabinet and the inside of the cabinet will also produce some oil stains, and then it is more troublesome to clean up. Because the space between the top of the hood and the cabinet is very small, the larger cleaning tools cannot reach in, and there is a certain gap between the cabinet and the top.

Fourth, affect the normal heat dissipation of the range hood

The range hood should not be wrapped in the cabinet, but also because after wrapping it into the cabinet, the main body of the range hood will be in a closed space, which will affect the normal heat dissipation of the range hood, and after a long time, the function of the range hood will be damaged, affecting the discharge of indoor oil smoke, at this time, the indoor air quality will become worse, and the harmful substances in the oil smoke will also affect people's normal life.

Usually the cabinets are installed first, and then the appropriate range hood is selected according to the actual distance between the cabinets. Because the size of the range hood is not suitable, it can be adjusted, and the cabinets are custom-made, which is quite troublesome to adjust. Setting up the range hood in the cabinet is both beautiful and convenient, and it is also easy to disassemble.

In fact, the owner of the range hood can design different protection practices according to different range hood models.

For the T-type range hood, a compartment locker can be designed on the left and right sides of the T-type and then decorated with a side door. For situations where the space around the range hood is too small to be used as a storage compartment, you can boldly design a false door that looks like the opposite door, but it can't be opened, and it's purely decorative.

The advantages of cabinet-mounted range hoods Some netizens insist that the whole package is strong and beautiful, but some range hoods are fashionable, which is a highlight in itself. Just make a baffle to block the smoke pipe, it doesn't have to be fully enclosed. Listing**Most of the items are included in the total price of the cabinet.

If the **** and non** of ** are unchanged, I think it is better to pack the side suction. After all, it costs two or three hundred yuan to buy an extended decorative set separately.

I don't think the range hood should be wrapped in the cupboard, because if it is wrapped in the cupboard, it won't work, and it won't be able to smoke when cooking.

I don't think it should be put in the cupboard, because then the cabinet will be very dirty, and it will not be good for ventilation.

As a large appliance necessary for the kitchen, the range hood is installed in almost most homes when decorating. When designing a kitchen, the range hood can be mounted directly on the wall or a hanging cabinet can be installed on top of the range hood. More and more people are pursuing the concept of life.

After all, a beautiful and comfortable home environment can be pleasing to the eye and make life more comfortable. If the range hood is not wrapped, the sides of the top ceiling cabinet are asymmetrical, and the exposed range hood is not harmonious and aesthetically pleasing to the whole space. Therefore, from the point of view of appearance value, it is necessary to package the range hood.

If the range hood is not properly wrapped, the upper part will be ugly. It should be noted that the decorative cover for the smoke pipe above the range hood should also be purchased separately. A few hundred dollars is roughly equivalent to the cost of making a decorative cabinet.

Its cost is about the same as the cost of a fume hood trim hood. Wrapped in the cabinet, the overall aesthetic effect is better, which can make the hanging cabinet maintain a unified visual style. The range hood is sealed with a cabinet.

In addition to the aesthetics, there is more small storage space above the hydraulic press. While these spaces are small, they are used to put small items that are not used often, such as baking tools and spare knives. They are also very useful for small areas of kitchen space.

The usable area of the cabinet is reduced, the storage space is limited, and it is inconvenient to carry and place items. For a long time, if a white cabinet is used in the home, it may turn yellow due to high temperatures, which will greatly affect the aesthetics. In addition, high temperatures can also have an impact on what is being stored.

There is also a saying in Feng Shui, "Call it a "cabinet pressure furnace, the sky is not prosperous". Although there is no scientific basis for this statement, there are still many people who have an attitude of "believing in it, not believing it".

This home option does not include a range hood. Basically, there are a lot of side range hoods. In addition, during the packing process, the door panel will be reserved in advance for later maintenance.

The family is a flat range hood, so few people are willing to pack a range hood. Therefore, the decoration must be considered comprehensively. Whether it is in terms of renovation budget, practicality or aesthetics, it should be taken into account.

That way, you won't regret it after checking in.