Should you make a wall cabinet on the range hood and wrap the smoke pipe decorative pipe

It is recommended to use a smokeless pipe internal circulation oil fume air purifier. Shanghai multi-ring oil fume purification equipment **** R & D and production of smokeless pipe range hood is not the smoke pipe external emission of oil fume purification equipment, the use of suction and exhaust purification machine in the form of cooking oil, smoke particles and harmful gases (aldehyde, benzene, vocs, etc.), peculiar smell (spicy, smelly, sour, etc.) and harmful bacteria in the indoor purification of kitchen appliances. It is not only an efficient oil fume purifier but also a powerful air purifier, which achieves zero emission outdoors and no pollution indoors.

Inquiry: 021-60822556

Not necessarily. <>

The reasons are: 1. New range hood.

The top wall cabinet will affect the appearance;

2. The position of the range hood is made of hanging cabinets, which affects the disassembly and cleaning;

3. Aluminum-plastic panels can be used.

Cover the air supply pipes;

4. Size is the first condition, and the depth of some range hoods cannot meet the standard cabinet size requirements.

Of course, you can also consider reserving pipes by doing the following:

Insert one end of the smoke exhaust pipe into the check valve.

The notch between the inner and outer rings of the air outlet is fastened with screws, and the other end is directly extended into the outdoor through the reserved hole, if the smoke exhaust pipe is connected into the public flue, it must be connected with the public flue anti-return smoke check valve, and sealed, if the smoke is exhausted to the outside of the wall, it is recommended to install a shutter outside the smoke exhaust pipe.

Avoid backfilling.

There are two ways to go to the smoke pipe of the range hood: one is to go to the ceiling, and the other is to go to the cabinet.

If you plan to go to the ceiling, then you need to pre-embed the smoke pipe and then make the ceiling, if you plan to go to the cabinet, you need to install a cabinet to wrap the smoke pipe, the smoke pipe is exposed outside is very beautiful.

Aoxu integrated stove will answer for you: you can do it if you consider the beauty. It is better to choose the integrated stove directly, the smoke pipes are all below, and you can use it through the cabinet, which is both beautiful and easy to use.

Dear, hello, I am happy to answer for you: who installs the smoke pipe in the kitchen Answer: dear, hello, generally the installation worker comes to install the range hood together with the smoke exhaust pipe and the public flue check valve, so that the range hood is installed, if you just hang the range hood on the wall, others like the smoke exhaust pipe and the public flue check valve are not installed, then this is not considered to be the completion of the slow burial installation, who installs the range hood who is responsible for disturbing the installation of the smoke exhaust pipe, if it is the after-sales responsible for the installation, Then the smoke exhaust pipe check valve is responsible for the after-sales installation, if you install the range hood yourself, then the smoke exhaust pipe check valve is installed by yourself, under normal circumstances, the seller will provide installation services when buying the range hood, and there are individual cases of bringing it back and installing it yourself.

Before customizing the cabinets, reserve the installation location, size, and style of the range hood with the cabinet merchant, and reserve the location of the pipes in the range hood. There is no certain requirement for the installation sequence of the flask and the range hood, which can be installed together but there is a point to reserve the position of the flue first, and the flask can also be installed first and then the range hood, so that it is convenient to coordinate, and there will be some problems in the installation process. The pipe of the smoke lamp black machine is too ugly to be exposed outside, and the smoke exhaust outlet of some kitchens is above the range hood, so you can buy a smoke exhaust pipe"Humility"Decorative cover.

Although the decorative hood makes the smoke lamp black machine improve the overall aesthetics, but"Treat the symptoms but not the root cause"The color and color of the shell of the smoke lamp black machine are inconsistent, and the serious color will make people feel abrupt, and it is beautifying to wrap it with a wall cabinet so that it rises. Install the range hood first, for fear that the size of the range hood is not suitable; The best choice is to install the smoke machine at the same time, figure out the size and model of the smoke machine, and report to the cabinet dealer, such as installing the cabinet and the smoke machine at the same time, and solve the problem in person.

The light black machine is installed on the upper right side of the radiator, and the radiator should be on the same axis. Usually the height between the bottom of the top draft range hood and the desktop is 65 to 75cm, while the distance from the bottom of the side draft range hood to the desktop is 35 to 45 cm, so the installation position of different brands of range hoods is also different. If you choose to install the cabinet first, you need to reserve the position of the smoke machine in advance, and the size should be accurate.

Otherwise, when it is installed, it will be found that the size of the range hood is large, and the installation card is very troublesome, and if the size is small, the ash is easy to affect the appearance.

After the preparation is done, the first thing to do is to determine the installation height of the range hood. Generally, the height of the lower end of the upper range hood to the range hood is 65-75 cm, we use a ruler to measure the installation height of the range hood and mark it. Next, we will remove the baffle from the black lantern machine, place it in the pre-installed position, and mark the location of the drilled holes.

Unscrew the cover and screws of the grille and remove the cover and grille. Then unscrew the fastening screws of the wind wheel and take out the wind wheel. Soak the removed parts in warm water with a neutral detergent, wash them with a soft cloth and wipe them dry.

Scrub the dirt in the inner cavity of the volute with a soft cloth with a small amount of warm water with a small amount of neutral detergent, wash it with a soft cloth and wipe it dry; Assemble the above parts in the reverse order of disassembly; After installation, check whether the oil circuit of the appliance is smooth and whether the sealing ring on the volute can be sealed;

Do not wrap the range hood in the cupboard. The smoke machine is usually made of stainless steel, then stainless steel is definitely better than wood to do cleaning, you think about cleaning during the New Year's holidays, if the smoke machine is wrapped in, you have to open the cabinet door to clean the inside, and if the wood is not very resistant to oil stains, it is very easy to yellow.

When the range hood is installed, the installation service will be provided on the supply of the range hood, and I personally think that the range hood is best not to be wrapped in the cabinet, so it is inconvenient to clean.

In the process of installing the range hood, you should want to install it, the specific installation location, then punch holes, and finally fix it on the wall. Choose the right position according to the style of the range hood.

Dear, the range hood does not necessarily need to be close to the wall cabinet, but it is recommended to install it as close to the wall cabinet as possible, so that it can better discharge the fumes and heat from the stove and avoid affecting the items and personnel in the kitchen ridge. At the same time, the gap between the range hood and the wall cabinet also needs to be properly left for cleaning and maintenance.

Jane finger seepage.

Range hoods generally need to be installed above the stove to absorb the fumes and water vapor generated by food heating and keep the kitchen air fresh. As for whether it is necessary to close the wall cabinet, I personally think that it should be considered according to the actual situation.

If your kitchen wall cabinet is low and close to the cooktop, it is recommended to install the hood under the wall cabinet to better absorb the fumes.

However, if your wall cabinet is relatively high or far away from the stove, then in order to achieve the best exhaust effect, it is recommended to keep the range hood as close to the stove as possible, and pay attention to the fact that there are no other shelters or stacked items under the range hood to ensure that the smoke can be discharged smoothly. At this time, you can flexibly choose the distance from the hanging liquid cabinet according to the actual needs, and even adjust the installation height of the range hood, so as to better adapt to the actual situation of the kitchen.

In short, no matter how the range hood is installed, it is necessary to ensure its safe distance from the surrounding environment such as wall cabinets and stoves, as well as the normal operation and cleaning of the range hood.

As one of the essential appliances in modern kitchens, the emergence of range hoods has reduced oil smoke pollution in the kitchen and reduced the health of cooks due to oil smoke problems. If you want the range hood to work well, in addition to buying a reliable brand, installation is also very important. Many friends don't know much about installation, so I will introduce the relevant knowledge to you immediately.

1. The range hood does not need to be tightly attached to the hanging cabinet.

It is best to move the wall cabinet a few centimeters away. Because when the range hood is working, there will be a certain high temperature itself, and the wall cabinet products are not resistant to high temperature, if they are in a high-temperature environment for a long time, they are not only easy to deform, but also shorten the service life and accelerate the loss of the appliances in the cabinet; The distance from the ceiling partition is not only convenient for heat dissipation, but also more convenient for disassembly in the future. However, the disadvantage is that it is easy to fall dust above the range hood, which is not easy to clean.

Second, what problems should be paid attention to in the installation of range hoods.

1. The type of range hood depends on the type of range hood.

Common range hoods are divided into two types: top suction type and side suction type, the top suction installation height and the stove are recommended to be about 65-70 cm, and the side suction range hood installation height is recommended to be 35-45 cm, if it is too high or too low, it will affect the pumping effect.

2. Install a position away from strong air convection.

Due to the limited suction power of the range hood itself, once it is buried when the air convection is too large, the oil smoke will be blown away. Therefore, the installation position of the range hood should be far away from the vents such as doors and windows, otherwise the range hood can only be used as a decoration.

3. Range hood air duct.

Try not to be too long and the turning radius should not be too small, so that the installation will not only smooth the smoke exhaust, but also enhance the smoking effect and reduce the noise.

4. Remember to test the machine after installation.

Many people have installed the range hood, but they don't remember the step of the test machine, so Lu or suggest that friends must turn on the power to try it. You must find that there is a problem with the installation, and you can adjust it in time. If it is a quality problem of the product itself, it is also convenient to contact the after-sales exchange in time.

Conclusion of the article: The relevant knowledge about the installation of range hoods will be introduced to you here, I hope it will be helpful to you. If you want to know more about it, please continue to pay attention to Qeeka Home information platform.

In the process of installation and subsequent use, the position between the range hood and the wall and the wall cabinet can be adjusted, so as to reduce the distance between the range hood and the wall cabinet, so as to facilitate the cleaning of the grease between the range hood and the wall cabinet. The range hood is generally installed under the wall cabinet, and the back is close to the wall, using the range hood hanging plate installation structure. The household range hood hanging plate is fixed on the board body on the wall, and there is a hook on the board body, and the range hood is hung on the hook.

However, the position between the plate and the wall is not allowed to be adjusted at will, so it is difficult to ensure the close connection between the range hood and the wall cabinet during the installation process, which also makes it difficult to clean up the gaps.

First, from the design point of viewThe motor part of the smoke machine is wrapped into the wall cabinet, and there is a consideration of unified and beautiful style, so that after the design and installation is completed, there is a row of neat and beautiful wall cabinet doors on the wall.

If wrapped, the decoration style can correspond to other furniture, and it will appear.

It's neater and more beautiful. However, if the smoke machine is far away from the top of the kitchen, even if the smoke machine is enclosed, the pipe will still be exposed, which will appear more abrupt.

Based on many years of experience, first of all it is possible to wrap, but the designer does not recommend! Let's talk about the advantages and disadvantages of the range hood.

Everyone knows the truth! The internal structure of the wall cabinet is not explained! Confidentiality for now! The placement of this wall cabinet can also save space in the kitchen! Again, people-oriented thinking and reasonable physical order can solve many problems and needs!

When we are making cabinets, we often struggle with whether to wrap the range hood inside, and our suggestion is not to wrap the range hood unless it is necessary.

This depends on the individual, the bag can be wrapped or not, the bag is nothing more than to cover the ugliness, and the neck of the cigarette machine is ugly, reflecting the wholeness. If you choose a beautiful style of smoke machine, you can accept the smoke machine exposed to the outside and can not be included. Blister door panels are not recommended to be used as smoke cabinets.

First of all, buy the range hood to the household, and the master who makes the wall cabinet will reserve the location, and size for you according to the size of the range hood. Call the master of the range hood to home, first set the range hood well, install the master of the cabinet, and then wrap the range hood with a cabinet and inlay it in the cabinet, so that the installation of the whole range hood and cabinet is OK.

It is necessary to measure the size and leave a certain amount of space, so as not to affect the normal operation of the range hood.

The nozzle is fixed firmly. The wall cabinet is sturdy for installation. If the pipe of the range hood falls off, it will be very troublesome to install, and it will also cause peculiar smells. The wall cabinet should be installed firmly to prevent damage to the range hood caused by falling off.

It is best to install it at the same time to avoid errors, and this construction has high requirements for the master, so be sure to choose an experienced master.

If the range hood is installed in a wall cabinet, it is not easy to clean, and the environment inside will become dark after a long time, which is also a problem for the family.

The most noteworthy point is that regular cleaning should be carried out, after all, there will be a lot of dirt in these range hoods, and they should be checked and cleaned regularly, so as to avoid problems with the range hood.

Buy a range hood first, and then install the wall cabinet above according to the size of the range hood, and make a suitable size size, which is both beautiful and practical, and pay attention to the size and size.