Why is the rice cooker not covered tightly and how to solve it?

There are several reasons why the lid of the rice cooker cannot be buckled:

1. Check whether there are any foreign objects in the lower groove where the lid is placed.

2. Check whether the lid of the pot is a piston-like thing (which can move up and down) and whether it cannot be moved.

3. Check whether the entire lid is deformed.

4. Check whether the inner tank is deformed.

If the above reasons still do not solve the problem, please seek after-sales help.

Maintenance of the rice cooker:

1. The bottom of the rice cooker should be kept clean and hygienic, and there should be no dust or ash.

2. The rice cooker should be placed in a cool, dry place, avoid direct sunlight, and take the pot out of the base as little as possible, because there will be collisions in use, resulting in deformation of the bottom of the pot, resulting in poor heat conductivity of the rice cooker when cooking rice.

3. Do not take the rice cooker to the open flame stove to heat and cook, as it will damage the protective layer of the pot and shorten the life span. Do not put a wet rag on the rice cooker when cooking, keep the rice cooker clean, and scrub the pot, lid, and moisturizing cap frequently with a cutlery cleaner.

4. The shell and the electric heating plate should not be watered, if the water is accidentally entered, it should be stopped, and the rice cooker should not be used after it is completely dry, and the rice cooker should not be cooked with acid and alkaline food, nor should it be placed in a corrosive environment.

The lid of the rice cooker is not tight, it is estimated that it is the lid or pot. Deformed, so the cover is not tight, it is recommended to adjust the lid by hand, and then cook the rice after the cover is tight, otherwise the cooked rice will not be delicious.

The lid of the rice cooker is not tight, perhaps because the layer of rubber ring on the lid has fallen off, or because the rubber ring on the lid is broken, so it will cause the rice cooker to be not tight, it is recommended that you buy a new rubber ring.

Check whether the inner liner of your own rice cooker has been dropped, and after falling, it will cause it to crack, resulting in deformation, so it will cause your rice cooker and the previous rice cooker to be unable to cover together.

This may be because the sealing ring inside the lid, that is, the rubber gasket, is a problem, you take it off first to see if it is broken, if it is broken, just buy a replacement of the same model, or it may be that there is something in it that resists, clean it up and see if it works.

If the lid of the rice cooker is not tight, there is usually a problem with the sealing ring inside the lid, you can try to remove the sealing ring and reinstall it to see, if it is not good to disassemble and assemble it several times, you should consider replacing the sealing ring again.

If the lid of the rice cooker is not tight, most of it is caused by the deformation of the sealing strip of the rice cooker, and the sealing strip can be replaced, and there is also a situation that the folding blade of the rice cooker lid is a little deformed.

If the lid of the rice cooker cannot be buckled, first check whether there are rice grains or something else at the bottom of the pot that raises the pot cushion, and then check whether the buckle is broken.

The rice cooker lid is not tightly covered, which may be the reason for aging and the teeth cannot be closed, and you can replace the small pieces.

If the lid of the rice cooker is not tight, it may be because the inner tank, pot body or lid is deformed, or there may be a foreign body in the joint, so it is recommended to go to the after-sales maintenance point for treatment.

The rice cooker is not a pressure cooker, it is generally not very tight, it has an exhaust hole, and its lid is a buckle, plus a sealing ring, if it is really not strict, the sealing ring may be aging, or the buckle has been worn out for a long time, you can see what the reason is.

For the rice cooker is not tightly covered now, it is also possible that the sealing ring inside is no longer good, so if the sealing is not tight, you can also buy a good sealing ring to replace it.

If the lid is not tight, the lid may be deformed, you can buy a new lid online and try to see if it can be covered properly.

First of all, check whether there are some foreign objects, in the gap of the lid, after cleaning or individual, it is recommended to find a maintenance worker to remove the back place, and re-inspect and check.

Why is the rice cooker not covered tightly and how to solve it?

Check whether the buckle is broken, first check that the rice grains are boiled and used other things to cushion the height ** Where to buy it to report the installation, the company's big brand 1 repair.

Why is the rice cooker not tightly covered? That's the manufacturer's deliberate setting, the lid is tight, it's a pressure cooker lid, and the rice cooker is not strict, because a lot of water vapor appears when the rice cooker is boiling, and it must come out of that gap.

Then you can find the repair place where you sell the pot, and see if you have a problem with the quality of this fruit, or if it has been used for a long time and needs to be replaced.

Is it already boiling, and then the lid of the pot is lifted up, or the lid of the pot has been inflated and deformed, so it does not match the round pot.

The rice cooker lid is not tight, mainly because the closing plug of the rice cooker is broken, or the sealing ring is damaged.

Why is your calcium rice cooker not covered tightly? How to solve it? When I didn't cover the rice cooker tightly, we tried to skin him as much as possible, and the leather bowl of the bag was loose, so he didn't cover it tightly.

It may be that there is a problem with the quality of this rice cooker, you can ask about the after-sales service, take a look, what is the problem?

First, there is no complete decompression, and wait patiently for complete decompression.

Second, there is a rubber ring pad on the lid of the electric pressure cooker, and you can check if the leather pad is placed neatly.

Third, check whether the edge of the lid is squeezed out of shape.

Fourth, check the groove under the lid for foreign objects.

Fifth, after a long time, although the pressure drops to normal atmospheric pressure, the resistance between the safety valve and the lid increases (oil, food residue and oxides), so it does not naturally drop to a position that allows the lid to open normally. For this reason, you can poke the safety valve with the tip of chopsticks, but after use, pay attention to cleaning the debris between the safety valve and the lid in time to avoid repeating the same mistake next time.

1. It may be that there are rice grains or other things at the bottom of the pot lid to raise the lid.

Workaround: Check the bottom of the pot lid and clean it.

2. The buckle of the lid of the rice cooker is broken.

Solution: Go to the after-sales service center of the rice cooker to repair and replace the buckle.

3. The sealing rubber ring of the rice cooker lid is aging.

Solution: Replace the rubber ring of the rice cooker.

If the lid of the rice cooker is not tight, it may be due to the problem of the sealing ring, and you can report to the corresponding after-sales maintenance to check it.

1. There are rice grains or other things at the bottom of the pot lid to raise the lid.

Workaround: Check the bottom of the pot lid and clean it.

2. The buckle of the lid of the rice cooker is broken.

Solution: Go to the after-sales service center of the rice cooker to repair and replace the buckle.

3. The sealing rubber ring of the rice cooker lid is aging.

Solution: Replace the rubber ring of the rice cooker.

Why is it not tightly covered? How to solve the problem that the rice cooker lid is not tight? The main reason is that your pot is deformed.

Do you see if you're not covered in place? Or just bring him over.

<> The reasons and solutions for the rice cooker lid is not tight are as follows:

1. There are rice grains or other things at the bottom of the pot lid to raise the lid.

Workaround: Check the bottom of the pot lid and clean it.

2. The buckle of the lid of the rice cooker is broken.

Solution: Go to the after-sales service center of the rice cooker to repair and replace the buckle.

3. The sealing rubber ring of the rice cooker lid is aging.

Solution: Replace the rubber ring of the rice cooker.

Summary. Hello, happy to answer for you! Reasons and solutions for "the lid of the rice cooker cannot be covered":

1. There are rice grains or other things at the bottom of the pot lid to raise the lid. Workaround: Check the bottom of the pot lid and clean it.

2. The buckle of the lid of the rice cooker is broken. Solution: Go to the after-sales service center of the rice cooker to repair and replace the buckle.

3. The sealing rubber ring of the rice cooker lid is aging, and the solution: replace the rubber ring to close the li<>d

Hello, happy to answer for you! Reasons and solutions for "the lid of the rice cooker cannot be covered": 1. There are rice grains or other things at the bottom of the lid to raise the lid.

Solution: Check the lid of the pot and clean it up. 2. The buckle of the lid of the rice cooker is broken.

Solution: Go to the after-sales service center of the rice cooker to repair and replace the buckle. 3. The sealing rubber ring of the rice cooker lid is aging, and the method of solving the problem is as follows:

Replace the rubber ring and close the lid, oh dear, <>

Hello, happy to answer for you! "The lid of the rice cooker is not sold on the loss" It is also possible that the small valve heart of the gas outlet does not fall down, so that the edge of the lid is cracked, and the upper telescopic pressure is twisted back into place, please lift the lid air cover to the top <>of your head (the state of cooking), press the small pressure button on the inner edge of the lid with your hand, and it will be completely good if it can be pressed into the frame of the edge of the lid, and you should also see if there is a foreign object in the lower groove of the lid, and check whether the inner tank is deformed

The above is Xiao Lu Hongxi's question about you: "Why can't I cover the lid of the rice cooker when I am short of rice cooking?" If you have any other questions, you can continue to consult me I can accompany the book to continue to answer <> for you

Summary. Hello dear, the upper lid of the rice cooker can't be buckled, mainly because the button is broken, you can remove a button from the lid of the old rice cooker and replace it with the spring. ”

Hello dear, the upper lid of the rice cooker can't be buckled with a round ruler, mainly because the button is broken, you can remove a button from the lid of the old rice cooker and replace it with the spring. ”

Hello dear, the lid of the rice cooker can't be buckled, first check whether there are rice grains or something else at the bottom of the pot to raise the pot pad, and then check whether the buckle is broken.

Hello, the reasons and solutions for the rice cooker lid is not tight as follows: 1. The bottom of the pot lid is full of rice grains or other things to raise the lid. Workaround:

Check the bottom of the pot lid and clean it up. 2. The buckle of the lid of the rice cooker is broken, the solution: go to the after-sales service center of the rice cooker to repair and replace the buckle 3. The sealing rubber ring of the lid of the rice cooker is aging.

Solution: Replace the rubber ring of the rice cooker.

It should be that the buckle of the lid of the rice cooker is damaged, if the rice cooker is not heated, there is no pressure inside, the lid of the rice cooker will not open automatically, but after heating, the pressure inside the rice cooker will rise, and because the buckle of the lid of the rice cooker is damaged, it should not be buckled after heating.

The lid of the rice cooker is directly fixed with screws and can be replaced directly, if the buckle of the rice cooker is integrated with the lid, then when it is replaced, it should be replaced with the lid as a whole.