What is the condition that the Supor electric pressure cooker cannot be vented?

Updated on home 2024-06-27
10 answers
  1. Anonymous users2024-02-12

    1.The Supor electric pressure cooker exhaust valve is blocked.

    If we find that the exhaust valve of the Supor electric pressure cooker is not exhausting when we use the Supor electric pressure cooker, check that the float valve, exhaust valve, safety valve, and anti-blocking cover should be installed firmly and reliably, and the metal outer surface should be bright and free of oxidation and rust. Finally, the water is injected and the test pot is electrified, heated to a predetermined temperature, the exhaust valve can be vented normally, and the timer can be automatically shut down.

    This is likely to be because there are a lot of dirty things that block the exhaust port of the Supor electric pressure cooker exhaust valve, resulting in Supor, the exhaust valve is not vented, so we have to clean the exhaust port of the Supor electric pressure cooker exhaust valve in time.

    2.The Supor electric pressure cooker exhaust valve is broken.

    If under normal circumstances, if you use the Supor electric pressure cooker, you will find that the Supor electric pressure cooker is not exhausting, and in terms of performance, it is necessary to focus on checking whether the inner pot is in good contact with the electric heating plate, whether the power heating is normal, and whether the function switch and touch button are normal.

    The rotation regulator and timer should move freely, the heating and heat preservation indicator lights should be turned on and off accordingly, and the timer can be automatically shut down after the countdown is completed, and it is likely that the exhaust valve of the Supor electric pressure cooker is broken, and we need to replace it with a new exhaust valve.

  2. Anonymous users2024-02-11

    Before opening the lid, it is necessary to make sure that there is no air pressure in the pot, and then remove and limit the pressure valve to ensure that the lid can only be opened when there is no air pressure in the pot, or it can be forced to cool with cold water to reduce the pressure in the pot, and only when there is no gas discharge in the pot body, can the lid be opened. Pressure cookers on the market.

    There is a safety protection of opening and closing the lid, such as when there is air pressure in the pot, the safety bar is in the rising stage, at this time, the lid can not be opened according to the normal use method, and when there is no air pressure in the pot, the safety bar descends, and the lid can be opened safely. When venting, keep your hands or face away from the exhaust port to avoid burns.

    Extended informationAluminum is lightweight, fast heat transfer, cheap, and has a service life of more than 20 years. But using it undoubtedly requires an increase in the element of aluminum.

    The amount of absorption, long-term use of it is not good for health. Aluminum alloy products are better than pure aluminum products, durable and strong. Although the stainless steel pressure cooker is a little more expensive, it is heat-resistant, beautiful, and not easy to mix with acid, alkali and salt in food.

  3. Anonymous users2024-02-10

    Regarding the problem that the Supor electric pressure cooker cannot be vented, it may be that the exhaust hole is blocked, and the specific situation still needs to be confirmed on site.

  4. Anonymous users2024-02-09

    Summary. The air valve can't be pushed up when the Supor electric pressure cooker is cooking, you can try the following methods to solve it:

    1. Check whether the sealing rubber ring of the pressure cooker is damaged or defective.

    2. Whether the pressure limiting valve in the middle is in the correct position or whether there is food residue stuck inside, clean it carefully.

    3. Whether the jump valve of the exhaust moves up and down freely, it should also be cleaned and dredged.

    4. Whether the lid is broken and deformed.

    5. Whether there is rice residue in the trough where the sealing ring is placed.

    6. The lid of the pot did not rotate in place, almost a little, and a retractable clip inside stuck the exhaust valve.

    The Supor electric pressure cooker can't top up when cooking.

    When the Supor electric pressure cooker is making a trillion meal, the air valve cannot be raised, you can try the following methods to solve it: 1. Check whether the sealing rubber ring of the pressure cooker is damaged or damaged. 2. Whether the pressure limiting valve in the middle is in the right position or whether there is an oak inside the food residue stuck, clean it carefully.

    3. Whether the jump valve of the exhaust moves up and down freely, it should also be cleared as if renting and washing dredged. 4. Whether the lid is broken and deformed. 5. Whether there is rice residue in the trough where the sealing ring is placed.

    6. The lid of the pot did not rotate in place, almost a little, and a retractable clip inside stuck the exhaust valve.

    Hope mine can help you! <>

  5. Anonymous users2024-02-08

    Hello 1If you rotate the exhaust valve 90 degrees, you will hear the sound of exhaust and you will be able to see the exhaust phenomenon. 2.

    When the gas is discharged, the safety vent valve automatically lowers and the lid can be opened. 3.If you want to speed up the exhaust time, it is recommended to hold the valve with chopsticks and lift it up.

  6. Anonymous users2024-02-07

    Summary. The Supor electric pressure cooker is abnormal when the safety valve keeps deflating while cooking. The solution is to dredge the exhaust pipe under the pressure limiting valve, because the situation that has been deflated is caused by the blockage of the exhaust pipe, so the abnormal working condition can be lifted after the exhaust pipe is unobstructed.

    The Supor electric pressure cooker is abnormal when the safety valve keeps deflating while cooking. The solution is to dredge the exhaust pipe under the pressure limiting valve, because the situation that has been deflated is caused by the blockage of the exhaust pipe, so the abnormal working condition can be lifted after the exhaust pipe is unobstructed.

    Hope mine is helpful to you! Pro-3

    are all dredged, and the high-pressure exhaust valve has been exhausting.

    are all dredged, and the high-pressure exhaust valve has been exhausting.

    There is a problem with the vapor tightness of the exhaust valve. This problem, don't do it yourself at will, it's best to hit the manufacturer's after-sales service, and let them come to see if you can.

    The rubber ring inside the exhaust valve is loose, and the rubber ring is replaced.

    Good. Find after-sales maintenance, thank you.

    Good. Find after-sales maintenance, thank you.

    You are welcome. If you are satisfied with my reply, please give me a thumbs up, thank you! Have a great day! [than the heart] [than the heart] [than the heart].

  7. Anonymous users2024-02-06

    Hello dear, why doesn't the Supor electric pressure cooker exhaust automatically; Because the pressure cooker is a method of using electricity and increasing the pressure in the pot to cook the food in the pot, but the pressure in the pot can not be high, otherwise it will be very dangerous, and the pressure will be relieved through the pressure relief hole, on this principle, your pot is blocked by the pressure relief hole or the pressure is at the end, and the pressure in the pot is very low Electric pressure cooker maintenance method 1. Cut off the power supply to ensure that there is no pressure in the pot and then open the lid to ensure safety. 2. After removing the lid of the pot, use a detergent to wipe off the dirt, and the detergent is better to use a neutral detergent. 3. Clean the detergent on the lid of the pot with clean water 4. Clean the inside of the pot, and soak it in warm water if necessary.

    5. Clean the pot body and absolutely avoid soaking in water to avoid short circuit in the circuit. 6. Check the patency of the pressure limiting valve, and when the pressure limiting valve is blocked, the blockage must be removed to restore its smoothness.

  8. Anonymous users2024-02-05

    Supor pressure cooker keeps venting, what should I do?

    Hello dear, I'm glad to answer for you, the Supor pressure cooker keeps venting, what should I do? A: In this case, first of all, is there a problem with the ripening of your rice?

    If there is no problem, it is left alone. In addition, the exhaust pipe of the new pot and the thimble of the pressure limiting valve need to be run-in for a while, you can also look at the round hole of the exhaust pipe mouth for burrs, if there is a toothpick or something like that (don't use a tool such as a steel file that is too hard) to turn the burr off a few times along the arc. In addition, check whether the fixing nut of the lower exhaust pipe is loose and cause air leakage, and tighten it if it is loose.

    If there is gas removal from the beginning of the float valve seal to the end of cooking, this situation does not belong to exhaust but a little leakage, if it is chaotic, only a small amount is normal, if it is more strict to keep an eye on the slag weight, the new pot can ask the store to replace the goods (in fact, it is a matter that can be solved by changing the set of valves).

  9. Anonymous users2024-02-04

    Supor pressure cooker keeps venting, what should I do?

    Supor pressure cooker is directly exhausted, what should I do? Dear, hello, the pressure of the electric pressure cooker is normal when it is 0-20kp (that is, at the beginning) there is a little bit of exhaust, there is no potential safety hazard, if it reaches more than 20kpa, it is not normal to discharge good gas, the main reasons for this problem: 1. The pressure cooker is high, adjust or replace the pressure switch.

    2. Suppress the hidden pressure limiting valve is broken, replace the pressure limiting valve 3, tighten the pressure limiting valve screw, tighten the screw, I hope my answer will help you, Finally, I wish you good health and a happy mood! <>

  10. Anonymous users2024-02-03

    Summary. It is normal to have a small amount of exhaust gas at high pressure.

    If there is intermittent exhaust at high pressure when cooking rice, it is normal to have a boiling cooking function set by the computer, so don't worry about this.

    Supor pressure cooker keeps venting, what should I do?

    It is normal for a small amount of exhaust to be in the high-pressure shed. If there is intermittent exhaust at high pressure when cooking rice, it is normal to have intermittent exhaust gas, which is the boiling cooking function set by the computer and orange, so don't worry about this.

    There is an exhaust valve on the lid of the pot, which is also known as a pressure limiting valve.

    Its function is not to discharge the water vapor in the pot, so that the pressure in the pot increases, and then the float valve will automatically rise; Cook food under high pressure.

    The pressure limiting valve of Supor Fresh Breath 100 is in**.

    When used for a period of time, the pressure limiting valve should also be pulled out and cleaned, otherwise it will cause blockage.

    My question. There is an exhaust valve on the lid of the pot, which is a pressure limiting valve, and you will be able to reach it.

    Which one are several?

    Not like that. Supor pressure cooker.

    Offer it a little**.

    The position of the exhaust is the pressure limiting valve.

Related questions
7 answers2024-06-27

Supor ElectricPressure cookerThe usage is as follows: >>>More

9 answers2024-06-27

The cleaning method of the Supor electric pressure cooker decompression valve is as follows: >>>More

12 answers2024-06-27

1.Nowadays, most computerized electric pressure cookers will set different pressure modes to cook various ingredients, including steamed rice. All you need to do is put rice and water in the pressure cooker, close and lock the lid, and select the [Cook] button in the control panel; >>>More

7 answers2024-06-27

At the same time, the opening and closing knob designed at the top of the middle is very rounded, the upper rotation is unlocking, and the lower rotation is locking, and the front cover opening button cannot be opened in the locked state. The middle of the knob is designed with Supor's unique breathing lamp design, which is blue during cooking or when there is pressure in the pot, and green when the lid can be opened safely. The back of the top cover is a steam cover, which is used to slow down the steam emitted under pressure to avoid accidental injury, and to prevent plugging and leakage, which is safer and more intimate than those pressure cookers that go straight to and fro. >>>More

9 answers2024-06-27

The solutions to the exhaust valve that keeps leaking when the electric pressure cooker is cooking rice are: >>>More