How to clean the bottle you just bought, and how to clean the glass bottle you just bought

Updated on parenting 2024-06-27
7 answers
  1. Anonymous users2024-02-12

    After buying a new bottle, each part should be disassembled, brewed with water, and a small amount of flour can be dipped in ready to be washed. Nylon brush for glass bottles, sponge brushes for plastic bottles, brush glass bottle walls, bottle mouths, threads, bottle caps and other parts, and silicone bottles are brushed with two brushes. Clean the nipple with a special brush for the nipple, and clean the nipple hole with a nipple needle.

    How do you sterilize a new baby bottle?

    Glass bottle: its inner wall is smooth, although it is easy to clean and does not deform during cooking and disinfection, but the glass should be prevented from bursting during the disinfection process - it can be placed in unboiled water, gradually heated over medium or low heat, cover the pot and cook for 3 5 minutes to turn off the heat;

    Plastic bottles: Plastic bottles are easy to be deformed by heat, in which the nipple and hose part are sterilized by steaming, and the bottle part should be sterilized according to the temperature mark at the bottom of the bottle or on the manual.

    It is best to prepare a stainless steel pot separately for cooking and sterilization of the bottle, of course, it can also be sterilized with a special electronic sterilization device for the bottle.

    To brush the bottle, you need to buy a special bottle brush, there are one large and one small, the big one is the one to brush the bottle, and the small one is to brush the nipple. When brushing the bottle, use a brush to brush the bottle left and right, up and down for a few minutes, the same is true for brushing the nipple, it should be noted that the cap of the bottle is easy to accumulate dirt in the tight spiral position, and it is also necessary to use a small brush to brush carefully. After rinsing with water, if you don't want to boil, you can use boiling water to rinse the inside and outside of the bottle, nipple and lid.

  2. Anonymous users2024-02-11

    The bottle you buy must be cleaned, first boil a pot of boiling water, pour the boiling water into the bottle, and then what? Boil it with boiling water, sterilize it, clean the inside and outside of the bottle, including the pacifier, blanch it with hot water, sterilize, wash the polysaccharides several times, and then you can use it.

  3. Anonymous users2024-02-10

    The newly bought bottle is washed with running water first, then with detergent, and finally it is OK to take the boiling water and scald it again.

  4. Anonymous users2024-02-09

    A complete guide to glass cleaning! It turns out that cleaning the glass is so simple, and you can get it done without spending money by preparing these things.

  5. Anonymous users2024-02-08

    Prepare materials: bottle brush, nipple brush, washing spirit, appropriate amount of water.

    Cleaning method: 1. Wet the inside and outside of the bottle with water, and squeeze in a little washing spirit.

    2. Clean the bottle body with a bottle brush, both inside and outside, and rotate the bottom of the bottle to brush several times.

    3. Take a nipple brush and clean the connected parts such as the nipple and the lid.

    4. Finally, rinse the foam with clean water, and put it in a cool place to dry the water before use.

  6. Anonymous users2024-02-07

    New bottles must be carefully cleaned and sterilized.

    There are roughly two ways to disinfect:

    Boiling type Remove the nipple and cap, if it is a plastic bottle, you can put the bottle in boiling water for about 10 minutes; If it is a glass bottle, it should be placed in water that is not boiled. Water should cover the bottle. The nipple and lid can be sterilized with boiling water for about 5 minutes, and the time should not be too long, otherwise it is easy to deform.

    Steam disinfection After washing the bottle, remove the nipple and lid, put it in the steam sterilizer, and operate according to the time on the sterilizer instructions.

    Cleaning of feeding bottles 1After each feeding, be sure to pour out the remaining milk and wash it in time to prevent milk stains from condensing on the bottle. There is a special bottle brush on the market, which can reach into the bottle and clean every corner.

    Pay special attention to bottlenecks and spirals. 2.When cleaning the nipple, you do not need to use another detergent, and when cleaning, the nipple should be turned over and cleaned with a nipple brush.

    If there is a milk stain that has congealed on the nipple, you can soak it in hot water for a while and wait for the milk stain to soften before brushing it off with a nipple brush. Keep the milk outlet hole on the nipple open. The nipple is sterilized at least once a day.

    Love Suggestion 1Generally, pacifiers are more likely to break, so budget-conscious mothers may wish to prepare more pacifiers, according to the different ages of children, you can change the pacifier, and you don't need to replace the whole bottle.

    Hope it can help you, correct answer, click [Answer], thank you

    Your likes may be my motivation to continue helping others!

  7. Anonymous users2024-02-06

    Glass bottles should not be boiled with water before first use.

Related questions
10 answers2024-06-27

Under normal circumstances, the wood can be used with simple cleaning, and the natural ingredients have no effect on the water quality in the fish tank, but it is still very good for the microbial environment in the tank. If you don't want to make wood yellow water. >>>More

6 answers2024-06-27

Problems to pay attention to when buying a new refrigerator. >>>More

8 answers2024-06-27

1. After buying the new dishes and chopsticks, don't be in a hurry to use them, wash them carefully with dish soap, and use a sponge brush to brush them, so that the residual oil chemicals, dust and small particles in the manufacture of the new dishes and chopsticks can be washed away. >>>More

20 answers2024-06-27

New iron pot: rinse the pot with clean water and gently scrub with a sponge; After scrubbing, pour a teaspoon of oil into the pan and wipe the entire iron pan with a paper towel; Turn on low heat, heat the iron pot to complete the boiling, and then rinse the iron pot with clean water; Turn on a low heat to evaporate the water completely. Then apply a thin layer of oil to complete the pot. >>>More

5 answers2024-06-27

Illumination. Fugui bamboo does not have high requirements for light, likes a humid and high temperature environment, and must not be exposed to the sun for a long time. But it is also important to let it get a little light from time to time, otherwise the days will turn yellow and grow slowly. >>>More