How to change the 19 air conditioner filters of Langyi?

Replacement method: Most of the air conditioning filters are in the glove box, and of course, a small number of cars are in the center console. The air conditioning filter in the center console is still relatively easy to take, but the design of some glove boxes is more strange, and people must lie down to the bottom of the glove box, and there are two clips on the bottom.

You can think about changing this person to lie under the seat all the time, unlike another kind of change from the glove box, the other kind of glove box to change the air conditioning filter is much simpler, its air conditioning filter switch is on the top of the glove box, this kind of you have to pull the cover plate outside the air conditioning filter to open. It's a lot easier to change.

Precautions: Some air conditioner filters have a cut corner, friends should not change the wrong side when changing. Another is that you must not use too much force when screwing, especially some plastic screws, if you screw the silk is very troublesome, not cost-effective, if you feel that your air conditioning is smaller than before, the effect is not so good, you should consider changing one.

Suggestion: It is recommended that you replace the air conditioning filter once a year, otherwise the air conditioner will be very dirty after a long time, and it will cost dozens of dollars if you don't change it for a long time. After the outside dust goes in, it will be fully integrated into the evaporation box, which seriously affects the effect of the air conditioner.

Hello car owner, the air conditioning filter is under the co-pilot storage box, there is a rectangular bar, take it off, take out the air conditioning filter, and replace it with a new one

The Volkswagen Lavida air conditioning filter is located behind the co-pilot's glove box, and the filter can be replaced by removing the glove boxThe specific steps are as follows:

1. Open the co-pilot's glove box.

2. Loosen the buckle of the glove box.

3. After removing it, you can see the filter cover.

4. Remove the cover.

5. In this way, the air conditioning filter can be extracted.

6. Replace all parts in the opposite way and it is completed.

Precautions for operation:

1. The filter element has an arrow to indicate the direction, do not install it in reverse.

2. Do not damage the filter element, it will be closed incompletely.

Volkswagen Lavida air conditioning filter replacement steps: first open the engine compartment cover, find the air conditioning filter element, the air conditioning filter is located in the upper left corner of the engine compartment, that is, under the front windshield, in the red box in the picture below. Four screws need to be removed, the screws need to be removed with a hexagon screwdriver, and then the buckles on both sides can be broken to see the air conditioner filter, which is carried by a plastic bracket, carefully take it out, replace the new air conditioner filter, and fix it.

This is the location below the wipers on the right side of the engine compartment.

There is a guard plate under the co-pilot's glove box, which can be seen by removing it.

The Volkswagen Lavida air conditioning filter is located behind the co-pilot's glove box, and the filter can be replaced by removing the glove boxThe specific steps are as follows:

1. Open the co-pilot's glove box.

2. Loosen the buckle of the glove box.

3. After removing it, you can see the filter cover.

4. Remove the cover.

5. In this way, the air conditioning filter can be extracted.

6. Replace all parts in the opposite way and it is completed.

Precautions for operation:

1. The filter element has an arrow to indicate the direction, do not install it in reverse.

2. Do not damage the filter element, it will be closed incompletely.

1. The first step is to open the engine compartment cover and confirm the position of the air filter, the air filter is generally located on the left side of the engine compartment, that is, above the left front wheel, you can see a square plastic black box, and the filter element is installed inside; Face. There are 4 clips around the cover of this housing that are used to press the plastic housing above the air cleaner and keep the air intake line sealed. The structure of the buckle is relatively simple, we only need to gently break up the two metal clips upward, and the entire air filter cover can be lifted up, and there will also be individual models using screws to fix the air filter, at this time, you need to choose a suitable screwdriver to unscrew the screws on the air filter box, you can open the plastic shell to see the air filter inside;

2. In the second step, take out the air filter element to check whether there is more dust, you can gently pat the end face of the filter element or use compressed air to clean the dust on the filter element from the inside out, do not use tap water for rinsing. If the check air filter is already severely clogged, you will need to replace it with a new one. Comparing the old and new filters removed, we can see that the filter paper of the old filter has turned black.

This is because a lot of dust has accumulated in the paper fibers. Excessive dust accumulation will inevitably lead to low air flow, resulting in poor engine working conditions and weakened power performance. Therefore, regular replacement of the air filter is helpful for the maintenance of the power performance of the engine;

3. In the third step, after the air filter element is processed, the air filter box needs to be thoroughly cleaned,-- a large amount of dust will accumulate under the air filter, which is the culprit that causes the engine power to decline;

Fourth, when installing a new air filter, we need to pay attention to the right under the air filter. A protruding plastic sheet designed to prevent the installation of an anti-air filter. When installing the air filter, the plastic sheet should be stuck into the card slot of the filter seat to be installed in place;

4. After making sure that the air filter is installed in place, you can cover the shell, and the 4 buckles on the edge are buckled and you're done.